BAOSHISHAN Probe for Integrated Ultrasonic Emulsifing Homogenizer Ultrasonic Disruptor Chemistry Lab Equipment Integrated (Probe, 6mm)

WARNING--This probe is only for Integrated Homogenizer, not suitable for other homogenizer.

STANDARD PROBE--Aluminum Alloy Material: T1-6AL-4V

LATERAL ULTRASOUND--Compared with traditional ultrasound, the design of three-dimensional ultrasonic probe greatly improves the efficiency and reduces the loss of horn.

material:

PROBE

size:

Retail Price: $ 330.0

Wholesale Price: Inquire Now

Main Interface

2.User Group--10 sets of user data can be stored, you only need to find your user number to find the parameters you set in your last test.

3.Setting Key--Enter the setting interface 4.Current Frequency Display

6.Current Power Percentage Display--press 5 to increase, press 7 to decrease

8.Current Operating Mode--Continuous / Pulse / Timing continuous, full range time control range 1 minute to 99 hours

9.Current running status

Setting Interface

1.User Number--Each user number corresponds to one user, a total of ten groups

3.Shut Temp--when the solution temperature exceeds the set temperature, the machine automatically stops, when the constant temperature is lower than the set temperature, it's on.

4.Ultrasound Mode--There are three mode choices: Pulse, Time and Cont.

7.Total Running Time

8/9.Pulse on/off--only for mode pulse

Ultrasound Mode

PULSE--Suitable for most users. It can set working and pausing time. This kind of operation is the same as the old model and can effectively alleviate the temperature rise of samples.
Time--Ultrasound continues to work until the set time, this mode aims at the sample that is not easy to handle and there is no requirement for sample temperature.
Cont--Ultrasound will continue to operate as long as the power is kept on or it is not stopped, mainly for difficult samples, and need to achieve the crushing effect. Pay attention to the ultrasonic time, the sample and the ultrasonic transducer will heat up, and the horn loss will be faster.

Condition Requirements

Ambient temperature: 0-40 C
Relative humidity: not more than 85% (T = 20 C)
Working Conditions: General Samples, Maximum Continuous 1 Hour (Ultrasound usually does not last more than 30 minutes)
Transducer Temperature: 0-120 C
Treatment object: solution or mixture of solution

Main Interface

Setting Interface

Ultrasound Mode

Condition Requirements


Light Bulb Small bulb in the box allow you to view the status of the sampling process. It can automatically work at the optimum frequency and output points according to the fluidity of the sample.	Annular Ultrasonic Tc4 Titanium Alloy, compared with traditional ultrasound, the design of two-dimensional and three-dimensional ultrasonic probe greatly improves efficiency and reduces the loss of horn. If the horn is not immersed in liquid, the machine will not work, thus protecting the horn from damage. When the probe is in the air, the ultrasonic wave will stop automatically.	Pressure Transducer The pressure transducer used is a single screw structure. Different types and power transducers are equipped with different specifications and quantities of voltage ceramics Automatic Resonance Point, Automatic Sweep Tracking in 19-26KHZ Frequency Range	How does the probe emit ultrasound? When the machine works, the bottom surface of the probe emits ultrasonic waves, the side ultrasonic wave of the probe can act on the substance floating on the surface. The transducer generates high-intensity shear force in the liquid at the top of the probe head through the horn. And forms high-frequency alternating water pressure, which makes the cavity expand and explode to smash the cell.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

BAOSHISHAN Probe for Integrated Ultrasonic Emulsifing Homogenizer Ultrasonic Disruptor Chemistry Lab Equipment Integrated (Probe, 6mm)

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Main Interface

2.User Group--10 sets of user data can be stored, you only need to find your user number to find the parameters you set in your last test.

3.Setting Key--Enter the setting interface 4.Current Frequency Display

6.Current Power Percentage Display--press 5 to increase, press 7 to decrease

8.Current Operating Mode--Continuous / Pulse / Timing continuous, full range time control range 1 minute to 99 hours

9.Current running status

Setting Interface

1.User Number--Each user number corresponds to one user, a total of ten groups

3.Shut Temp--when the solution temperature exceeds the set temperature, the machine automatically stops, when the constant temperature is lower than the set temperature, it's on.

4.Ultrasound Mode--There are three mode choices: Pulse, Time and Cont.

7.Total Running Time

8/9.Pulse on/off--only for mode pulse

Ultrasound Mode

PULSE--Suitable for most users. It can set working and pausing time. This kind of operation is the same as the old model and can effectively alleviate the temperature rise of samples.
Time--Ultrasound continues to work until the set time, this mode aims at the sample that is not easy to handle and there is no requirement for sample temperature.
Cont--Ultrasound will continue to operate as long as the power is kept on or it is not stopped, mainly for difficult samples, and need to achieve the crushing effect. Pay attention to the ultrasonic time, the sample and the ultrasonic transducer will heat up, and the horn loss will be faster.

Condition Requirements

Ambient temperature: 0-40 C
Relative humidity: not more than 85% (T = 20 C)
Working Conditions: General Samples, Maximum Continuous 1 Hour (Ultrasound usually does not last more than 30 minutes)
Transducer Temperature: 0-120 C
Treatment object: solution or mixture of solution

Main Interface

Setting Interface

Ultrasound Mode

Condition Requirements


Light Bulb Small bulb in the box allow you to view the status of the sampling process. It can automatically work at the optimum frequency and output points according to the fluidity of the sample.	Annular Ultrasonic Tc4 Titanium Alloy, compared with traditional ultrasound, the design of two-dimensional and three-dimensional ultrasonic probe greatly improves efficiency and reduces the loss of horn. If the horn is not immersed in liquid, the machine will not work, thus protecting the horn from damage. When the probe is in the air, the ultrasonic wave will stop automatically.	Pressure Transducer The pressure transducer used is a single screw structure. Different types and power transducers are equipped with different specifications and quantities of voltage ceramics Automatic Resonance Point, Automatic Sweep Tracking in 19-26KHZ Frequency Range	How does the probe emit ultrasound? When the machine works, the bottom surface of the probe emits ultrasonic waves, the side ultrasonic wave of the probe can act on the substance floating on the surface. The transducer generates high-intensity shear force in the liquid at the top of the probe head through the horn. And forms high-frequency alternating water pressure, which makes the cavity expand and explode to smash the cell.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy