EPEVER MPPT Charge Controller 20A 12v 24v Auto, Solar Panel Regulator 100V PV Negative Grounded Solar Controller fit for Gel Sealed Flooded and Lithium Battery

size:

2210AN+MT50+TS-R+RS485

Retail Price: $ 122.99

Wholesale Price: Inquire Now

Specification:

Multiple load control modes: manual control, lighting ON/OFF, light On+Timer
Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%
Wide MPPT operating voltage range
LCD display design, dynamically displaying tool's operating data and working condition
Available for PC monitoring and external display realizing real-time data checking and parameters setting

Added Features（than Tracer A）:

Blacklight LCD Display / Common Negative Ground / Support lithium Battery / More Safety Protection

MT-50:

Compatible with EPever Tracer-A/AN/BN, LS-B/BP, VS-BN series controllers
Automatic identify the controller, and display the type, model and relevant parameter data
Large-screen multifunction LCD displays all the operational data and system working status
Real-time energy statistics recording
Longer communication distance based on RS485
Diversified load control modes:manual, light ON/OFF, Light ON+ Timer, Time Control

Package List:

1 x Tracer 2210AN Solar Charge Controller

1 x MT-50, 1 x Temp sensor,

2 x Use Manual

Tracer AN MPPT Charge Controller Features:

12 / 24VDC Auto
Rated charge current: 20A
Max Input Power:12V@ 260W | 24V@ 520W
Max PV open circuit voltage:100VDC (92V at 25℃ temperature)
Battery type selection: lead-acid (Gel, Sealed, Flooded) and Lithium
Charging Power and Current Limitation Function
User programmable for battery types, load control etc.
Accurately recognizing and tracking of multiple power point
PV short circuit / PV reverse polarity /Battery over voltage
Battery over discharge / Battery reverse polarity / Load overload protection
You can connect two or more Tracer charge controller to the batteries bank in parallel, but do not share PV Panels. Dedicate a number of PV panels to each mppt controller.
Never connect the soalr panel array to the controller Without/Before a Battery.


MPPT Charge Controller 12 / 24VDC Auto Rated charge current:20A Battery voltage range: 9V~32V Max.PV open circuit voltage:100VDC Common-Negatived Ground Controller Ultra-fast tracking speed MPPT Technology High Tracking Efficiency > 99%	MT-50 Remote Meter Display Automatic identify the controller, and display the type, model and relevant parameter data Large-screen multifunction LCD displays all the operational data and system working status Real-time energy statistics recording	Remote Temperature Sensor(TS-R) Line length:9.84ft Connector: 0.0125ft /2P Testing temperature: -131℉~257℉ If the controller not connectd the TS-R, the default setting for battery charging/discharging temperature is 25 °C without temperature compensation	RS485-150U Cable This Cable is used to monitor each controller on the network using Solar Station PC software and update the firmware.

Warm tips：

Step: Connect the system in the order of 1.battery-->2. load-->3.PV array, and disconnect the system in the reverse order 3. 2. 1.

Never connect the soalr panel array to the controller Without/Before a Battery.
Battery must be connected first !!!
DO NOT connect any inverter/ wind/Alternator or Charger into the charge controller!
If the remote temperature sensor is not connected to the controller,, the default setting for battery charging or discharging temperature is 25 °C without temperature compensation.
The wire size is only for reference. If there is a long distance between the PV array and the controller or between the controller and the battery, larger wires can be used to reduce the voltage drop and improve performance.

How to program for Lithium Battery？

1. Via PC (Accessories needed：RS485), software download website: EPever official website or look for in the manual

2. Via lastest Andriod phone APP (Accessories needed：Ebox-Wifi or Ebox-Blue)


	Tracer 2210AN Controller	Tracer 4210AN Controller	Tracer 5415AN Controller	Tracer 6415AN Controller	Tracer 3210AN Controller	MPPT Controller 30A
System Voltage	12V/24V DC	12V/24V DC	12V/24V/36V/48V DC	12V/24V/36V/48V DC	12V/24V/ DC	12V/24V DC
Max Power Current	20A	40A	50A	60A	30A	30A
Max Input Power	12V/260W \| 24V/520W	12V/520W \| 24V/1040W	12V/625W \| 24V/1250W 36V/1875W \| 48V/2500W	12V/750W \| 24V/1500W 36V/2250W \| 48V/3000W	12V@ 390W \| 24V@ 780W	12V@ 390W \| 24V@ 780W
Max,PV Open Circuit Voltage	100V(92V At 25℃ temperature)	100V(92V At 25℃ temperature)	150V(138V At 25℃ temperature)	150V(138V At 25℃ temperature)	100V(92V At 25℃ temperature)	150V(138V At 25℃ temperature)
Grounding	Negative	Negative	Negative	Negative	Negative	Negative
Battery Type	Sealed, Gel and Flooded, User and Lithium	Sealed, Gel and Flooded, User and Lithium	Sealed, Gel and Flooded and User	Sealed, Gel and Flooded and User	Sealed, Gel and Flooded, User and Lithium	Sealed, AGM, Gel. Flooded and User


	RS485-150U+TS-R	MT50 meters	MC4 Connectors 10 Pairs	30A charge controller	45A charge controller	60A charge controller
	Support Tracer A/AN/BN Controller	Fit for Tracer A/AN/BN Mppt controller	5 Pair/ 10 Pair/ 20 Pair	Fit for Lead-acid Battery	Fit for Lead-acid Battery	Fit for Lead-acid Battery

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

EPEVER MPPT Charge Controller 20A 12v 24v Auto, Solar Panel Regulator 100V PV Negative Grounded Solar Controller fit for Gel Sealed Flooded and Lithium Battery

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Specification:

Multiple load control modes: manual control, lighting ON/OFF, light On+Timer
Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%
Wide MPPT operating voltage range
LCD display design, dynamically displaying tool's operating data and working condition
Available for PC monitoring and external display realizing real-time data checking and parameters setting

Added Features（than Tracer A）:

Blacklight LCD Display / Common Negative Ground / Support lithium Battery / More Safety Protection

MT-50:

Compatible with EPever Tracer-A/AN/BN, LS-B/BP, VS-BN series controllers
Automatic identify the controller, and display the type, model and relevant parameter data
Large-screen multifunction LCD displays all the operational data and system working status
Real-time energy statistics recording
Longer communication distance based on RS485
Diversified load control modes:manual, light ON/OFF, Light ON+ Timer, Time Control

Package List:

1 x Tracer 2210AN Solar Charge Controller

1 x MT-50, 1 x Temp sensor,

2 x Use Manual

Tracer AN MPPT Charge Controller Features:

12 / 24VDC Auto
Rated charge current: 20A
Max Input Power:12V@ 260W | 24V@ 520W
Max PV open circuit voltage:100VDC (92V at 25℃ temperature)
Battery type selection: lead-acid (Gel, Sealed, Flooded) and Lithium
Charging Power and Current Limitation Function
User programmable for battery types, load control etc.
Accurately recognizing and tracking of multiple power point
PV short circuit / PV reverse polarity /Battery over voltage
Battery over discharge / Battery reverse polarity / Load overload protection
You can connect two or more Tracer charge controller to the batteries bank in parallel, but do not share PV Panels. Dedicate a number of PV panels to each mppt controller.
Never connect the soalr panel array to the controller Without/Before a Battery.


MPPT Charge Controller 12 / 24VDC Auto Rated charge current:20A Battery voltage range: 9V~32V Max.PV open circuit voltage:100VDC Common-Negatived Ground Controller Ultra-fast tracking speed MPPT Technology High Tracking Efficiency > 99%	MT-50 Remote Meter Display Automatic identify the controller, and display the type, model and relevant parameter data Large-screen multifunction LCD displays all the operational data and system working status Real-time energy statistics recording	Remote Temperature Sensor(TS-R) Line length:9.84ft Connector: 0.0125ft /2P Testing temperature: -131℉~257℉ If the controller not connectd the TS-R, the default setting for battery charging/discharging temperature is 25 °C without temperature compensation	RS485-150U Cable This Cable is used to monitor each controller on the network using Solar Station PC software and update the firmware.

Warm tips：

Step: Connect the system in the order of 1.battery-->2. load-->3.PV array, and disconnect the system in the reverse order 3. 2. 1.

Never connect the soalr panel array to the controller Without/Before a Battery.
Battery must be connected first !!!
DO NOT connect any inverter/ wind/Alternator or Charger into the charge controller!
If the remote temperature sensor is not connected to the controller,, the default setting for battery charging or discharging temperature is 25 °C without temperature compensation.
The wire size is only for reference. If there is a long distance between the PV array and the controller or between the controller and the battery, larger wires can be used to reduce the voltage drop and improve performance.

How to program for Lithium Battery？

1. Via PC (Accessories needed：RS485), software download website: EPever official website or look for in the manual

2. Via lastest Andriod phone APP (Accessories needed：Ebox-Wifi or Ebox-Blue)


	Tracer 2210AN Controller	Tracer 4210AN Controller	Tracer 5415AN Controller	Tracer 6415AN Controller	Tracer 3210AN Controller	MPPT Controller 30A
System Voltage	12V/24V DC	12V/24V DC	12V/24V/36V/48V DC	12V/24V/36V/48V DC	12V/24V/ DC	12V/24V DC
Max Power Current	20A	40A	50A	60A	30A	30A
Max Input Power	12V/260W \| 24V/520W	12V/520W \| 24V/1040W	12V/625W \| 24V/1250W 36V/1875W \| 48V/2500W	12V/750W \| 24V/1500W 36V/2250W \| 48V/3000W	12V@ 390W \| 24V@ 780W	12V@ 390W \| 24V@ 780W
Max,PV Open Circuit Voltage	100V(92V At 25℃ temperature)	100V(92V At 25℃ temperature)	150V(138V At 25℃ temperature)	150V(138V At 25℃ temperature)	100V(92V At 25℃ temperature)	150V(138V At 25℃ temperature)
Grounding	Negative	Negative	Negative	Negative	Negative	Negative
Battery Type	Sealed, Gel and Flooded, User and Lithium	Sealed, Gel and Flooded, User and Lithium	Sealed, Gel and Flooded and User	Sealed, Gel and Flooded and User	Sealed, Gel and Flooded, User and Lithium	Sealed, AGM, Gel. Flooded and User


	RS485-150U+TS-R	MT50 meters	MC4 Connectors 10 Pairs	30A charge controller	45A charge controller	60A charge controller
	Support Tracer A/AN/BN Controller	Fit for Tracer A/AN/BN Mppt controller	5 Pair/ 10 Pair/ 20 Pair	Fit for Lead-acid Battery	Fit for Lead-acid Battery	Fit for Lead-acid Battery

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.