Power Failure Detector with Text Message and Email Alerts

Be alerted when power goes out: MySpool Power Failure Detector uses Wi-Fi to send text messages, email or push alerts when power goes off or comes back on.

Monitor outlets for outages and GFCI shut off. Device description is included in alert message to help identify its location.

Each MySpool Power Failure Detector is independent; no hub is required.

WiFi access during power outage is required, please check before ordering.

No fees or subscription costs. Multiple phone numbers and email addresses supported.

Retail Price: $ 42.99

Wholesale Price: Inquire Now

Be alerted away from home or business: MySpool Power Failure Alert is a smart device that sends an alert when power failure is detected. An alert is also sent when power comes back on. That alert is a message, either via email or text, or both. Power Failure Alert is configured to use your WiFi (see Important Note below). The setup takes a few minutes with a smart phone or a laptop.

No Hub Required: Each Power Failure Alert works independently with your Wi-Fi network. Multiple devices can be placed in different locations throughout your home or business. Your notifications will include your text for each device that you specify in the device configuration.

No Fees: There are no fees for using MySpool Power Failure Alert for any notifications. Multiple telephone numbers and emails are supported included free of charge.

Flexible design: MySpool Power Failure Alert comes with an extra long 6 foot power cord connected to an enclosure with a transmitter. Power Failure Alert will ignore short duration power fluctuations of less than 2 seconds so that no unnecessary notifications are sent. Note that since no device is permitted to send more than 1 alert per minute, your POWER ON notification may be delayed by up to 1 minute if power comes back on immediately. Each device requires 3 AAA batteries, included. The batteries should last 5 years or more assuming average power outages and fluctuations

Important Note: one requirement for the Power Failure Alert deployment is that a WiFi network is available when A/C power outlet being monitored loses power. A good example is a UPS backed WiFi router which Power Failure Alert uses to access MySpool cloud servers.

Setup Instructions for all myspool devices are available online on myspool.com. This is a summary:

Connect your device to WiFi and trigger an alert: plug it in the A/C outlet being monitored
Create an account on myspool.com and click on email link to confirm it or login to your existing account if one already exists
Confirm your email subscription for this device to receive alert notifications

You are done: trigger an alert from your device by unplugging it and receive an email notification!

You can add a phone number and change message and other settings at any time.


MySpool device setup Summary 1. Connect your device to WiFi 2. Create account on myspool.com 3. Configure your email and text message on myspool.com The first step is the most challenging one. It should also be done first so that MySpool servers can identify your device when you login to configure it.	Step 1. Connect your device to WiFi Open your phone, go to Settings, and choose Wi-Fi. Under the CHOOSE A NETWORK tab you will see available networks. One of them will be the MySpool Device. It will look like SASensor-000000 where "000000" is the unique device ID. In the example it is shown as SASensor-2336877. Click on it. Once connection is established, which may take a few seconds, it will open a browser window with Alerts WiFi Manager.	Step 1, continued. Configure WiFi Click Configure WiFI. You will see a list of networks that MySpool device can use. Select your WiFi router and enter its password. Click Save. Note: SAS network will not be visible on your phone after this step. You can now use your laptop or smartphone to create an account on myspool.com and specify where you want your emails and text messages sent.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Power Failure Detector with Text Message and Email Alerts

BEST SELLERS

Product introduction

Shipping Notices

Product Description

No Fees: There are no fees for using MySpool Power Failure Alert for any notifications. Multiple telephone numbers and emails are supported included free of charge.

Setup Instructions for all myspool devices are available online on myspool.com. This is a summary:

Connect your device to WiFi and trigger an alert: plug it in the A/C outlet being monitored
Create an account on myspool.com and click on email link to confirm it or login to your existing account if one already exists
Confirm your email subscription for this device to receive alert notifications

You are done: trigger an alert from your device by unplugging it and receive an email notification!

You can add a phone number and change message and other settings at any time.


MySpool device setup Summary 1. Connect your device to WiFi 2. Create account on myspool.com 3. Configure your email and text message on myspool.com The first step is the most challenging one. It should also be done first so that MySpool servers can identify your device when you login to configure it.	Step 1. Connect your device to WiFi Open your phone, go to Settings, and choose Wi-Fi. Under the CHOOSE A NETWORK tab you will see available networks. One of them will be the MySpool Device. It will look like SASensor-000000 where "000000" is the unique device ID. In the example it is shown as SASensor-2336877. Click on it. Once connection is established, which may take a few seconds, it will open a browser window with Alerts WiFi Manager.	Step 1, continued. Configure WiFi Click Configure WiFI. You will see a list of networks that MySpool device can use. Select your WiFi router and enter its password. Click Save. Note: SAS network will not be visible on your phone after this step. You can now use your laptop or smartphone to create an account on myspool.com and specify where you want your emails and text messages sent.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.