Crystiles Peel & Stick Backsplash Tiles
Crystiles peel & stick backsplash tile, a Crystal-Like wall tile made of adhesive substrate topped with Crystal-Like soft vinyl component, can be installed in just hours without any specialized tools. No grout, no glue, and no mess. Just cut, peel and stick! We make your renovation project way easier!!!
Crystiles Peel & Stick Backsplash Tiles Are Perfect for Most Smooth, Dry and Clean Surfaces
Crystiles Peel & Stick Backsplash tiles are specifically designed for bathroom and kitchen and are perfect for most smooth, dry and clean surfaces like below.
● Mirror, un-textured wallpaper, smooth ceramic or glass tiles (without reliefs), acrylic wall panel.
● Linoleum wall, painted gypsum, painted wood board, stainless steel panel, Aluminium plate, etc.
However, our tiles are NOT recommended for dusty, porous, crumbling or rough surfaces like below.
● Porous wood, stucco, brick, ceramic or glass tile with thick relief.
● Textured wallpaper, unpainted gypsum, stone, etc.
And our tiles can't be installed on floors, countertops and ceilings. For the surface with direct and continuous contact with water like the inside of a shower, our tiles are NOT recommended either.
We Design and Produce Crystiles Peel & Stick Backsplash Tiles in a Wide Range of Colors and Styles
We design and produce Crystiles peel & stick backsplash tiles in a wide range of colors and styles since 2015.
We use full-automatic production lines to ensure the quality and consistency, and we use high grade raw material to make sure the tiles are durable and will never crack or yellow. We have comprehensive quality control procedures in place, from incoming raw material check, in-process monitoring, to outgoing sampling inspection, to make sure all tiles customer receive are defect free.
Installation Is Super Easy and Is Totally Dust Free
Make sure the surface is COMPLETELY CLEAN AND DRY before applying. Use a powerful grease-remover to clean if needed. For freshly painted surface, it may take up to 4 weeks for it to dry completely. The tile will not stay on long if the surface is wet.
WARNING:
● For gas ranges without a back control panel or metal plate, a safety zone (without Crystiles tiles) of at least 18" (46cm) must be preserved to avoid direct exposure to open flames.
● For small appliances like toasters, counter ovens, etc., leave a safety clearance of at least 3" (8cm) between Crystiles tiles and the appliance.
● Do NOT use abrasive-cleaning poduct to clean. Simply use a mild non-abrasive household cleaning product and a piece of cloth or a sponge to restore the shine of the tiles.
Use a level or chalk line to trace a guideline on the wall. Peel off the protective paper in the back without touching the adhesive portion with your fingers. Align the top of the first tile on the line that was already drawn. Apply pressure on the tile to finish.
NOTE: The 1st tile must be perfectly aligned as all the followed tiles will be installed against this one.
The tile could be repositioned during installation if firm pressure has not already been applied. Once the tile is aligned properly and firm pressure has been applied, the tile will be stuck on permanently and can't be re-used.
For the jagged edge models, the overlapping tabs of the first tile must be cut off in order to get a straight edge to begin the installation.
For the 2nd and all remaining, overlap the grout line of the edges over the already installed tiles.
Cut tile for desired size / shape by using scissors or utility knife. Use a ruler to guide if needed. If you want to remove a tile when firm pressure has been applied, use a hair dryer to warm up the tile to soften the adhesive and delicately remove from the corner. Excess glue may be left on the surface, and the surface like latex painted might be damaged.
BEST SELLERS
Product Description
Crystiles Peel & Stick Backsplash Tiles
Crystiles peel & stick backsplash tile, a Crystal-Like wall tile made of adhesive substrate topped with Crystal-Like soft vinyl component, can be installed in just hours without any specialized tools. No grout, no glue, and no mess. Just cut, peel and stick! We make your renovation project way easier!!!
Crystiles Peel & Stick Backsplash Tiles Are Perfect for Most Smooth, Dry and Clean Surfaces
Crystiles Peel & Stick Backsplash tiles are specifically designed for bathroom and kitchen and are perfect for most smooth, dry and clean surfaces like below.
● Mirror, un-textured wallpaper, smooth ceramic or glass tiles (without reliefs), acrylic wall panel.
● Linoleum wall, painted gypsum, painted wood board, stainless steel panel, Aluminium plate, etc.
However, our tiles are NOT recommended for dusty, porous, crumbling or rough surfaces like below.
● Porous wood, stucco, brick, ceramic or glass tile with thick relief.
● Textured wallpaper, unpainted gypsum, stone, etc.
And our tiles can't be installed on floors, countertops and ceilings. For the surface with direct and continuous contact with water like the inside of a shower, our tiles are NOT recommended either.
We Design and Produce Crystiles Peel & Stick Backsplash Tiles in a Wide Range of Colors and Styles
We design and produce Crystiles peel & stick backsplash tiles in a wide range of colors and styles since 2015.
We use full-automatic production lines to ensure the quality and consistency, and we use high grade raw material to make sure the tiles are durable and will never crack or yellow. We have comprehensive quality control procedures in place, from incoming raw material check, in-process monitoring, to outgoing sampling inspection, to make sure all tiles customer receive are defect free.
Installation Is Super Easy and Is Totally Dust Free
Make sure the surface is COMPLETELY CLEAN AND DRY before applying. Use a powerful grease-remover to clean if needed. For freshly painted surface, it may take up to 4 weeks for it to dry completely. The tile will not stay on long if the surface is wet.
WARNING:
● For gas ranges without a back control panel or metal plate, a safety zone (without Crystiles tiles) of at least 18" (46cm) must be preserved to avoid direct exposure to open flames.
● For small appliances like toasters, counter ovens, etc., leave a safety clearance of at least 3" (8cm) between Crystiles tiles and the appliance.
● Do NOT use abrasive-cleaning poduct to clean. Simply use a mild non-abrasive household cleaning product and a piece of cloth or a sponge to restore the shine of the tiles.
Use a level or chalk line to trace a guideline on the wall. Peel off the protective paper in the back without touching the adhesive portion with your fingers. Align the top of the first tile on the line that was already drawn. Apply pressure on the tile to finish.
NOTE: The 1st tile must be perfectly aligned as all the followed tiles will be installed against this one.
The tile could be repositioned during installation if firm pressure has not already been applied. Once the tile is aligned properly and firm pressure has been applied, the tile will be stuck on permanently and can't be re-used.
For the jagged edge models, the overlapping tabs of the first tile must be cut off in order to get a straight edge to begin the installation.
For the 2nd and all remaining, overlap the grout line of the edges over the already installed tiles.
Cut tile for desired size / shape by using scissors or utility knife. Use a ruler to guide if needed. If you want to remove a tile when firm pressure has been applied, use a hair dryer to warm up the tile to soften the adhesive and delicately remove from the corner. Excess glue may be left on the surface, and the surface like latex painted might be damaged.
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
