McGard 24215 Chrome Cone Seat Wheel Locks (M14 X 1.5 Thread Size) - Set of 4

['Chrome', 'Cone seat style wheel locks', 'M14 x 1. 5 thread size', '1. 639 inch overall length', '4 locks and 1 key', '21mm and 22mm Dual Hex Size; Seat/Style: Cone Seat Nut']

Retail Price: $ 31.13

A Different Lock for Every Wheel

McGard offers multiple wheel lock options that vary in thread size, thread length and color. One important factor that often goes overlooked is the mounting surface type. Some wheels required a cone seat, some require a radius seat and others may require a shank style wheel lock. It is important to match the seat type of the wheel lock with the seat type of the wheel for proper installation.

See comparison chart below to help determine the best wheel lock type for your vehicle and wheel combination.


	Lug Style	Bolt Style	Tuner Style	Bolt Style	Shank Style
Seat Type	Cone Seat	Radius Seat	Cone Seat	Cone Seat	Shank Seat


Step 1 Remove wheel covers (if equipped) and one lug nut/bolt from each wheel. If studs are rusty, clean with a wire brush prior to installing wheel locks. Do not lubricate threads. Note: Wheel locks should always be the last nut/bolt tightened on each wheel and should be the first one loosened.	Step 2 By hand, install one McGard Wheel Lock onto each wheel to replace the lug nut/bolt removed in step 1. Use only one lock per wheel. Note: If original lug nuts/bolts use a washer/plastic cap, be sure to install the washer/plastic cap included in package onto the wheel locks. Notice: Air impact guns should not be used for installation of locks or lug nuts/bolts. Use of an impact gun for installation may cause over tightening resulting in difficulty of removal and permanent damage to the lock and key. Overtightening can also cause damage to brake rotors and wheel seats.	Step 3 Using the McGard key and a lug wrench, tighten each lock to the torque specified in your vehicle owner’s manual. Be sure to keep the key pattern squarely engaged into the lock pattern via direct inward pressure. For best results, use a torque wrench and socket for final tightening. Wheel locks should be re-torqued after 25 miles(40Km) of driving. Newly installed lug nuts/bolts should also be re-torqued.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

McGard 24215 Chrome Cone Seat Wheel Locks (M14 X 1.5 Thread Size) - Set of 4

BEST SELLERS

Product introduction

Shipping Notices

Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed OEM standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to over 30 car lines around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. The steel collar on the user friendly key guides the key into the lock pattern. The collar holds the key in alignment for easy installation and removal. The computer generated key designs allow for an infinite number of key patterns. The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern. Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security. McGard’s plating process includes three layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. This product may contain globally sourced materials/components.

From the manufacturer

A Different Lock for Every Wheel

See comparison chart below to help determine the best wheel lock type for your vehicle and wheel combination.


	Lug Style	Bolt Style	Tuner Style	Bolt Style	Shank Style
Seat Type	Cone Seat	Radius Seat	Cone Seat	Cone Seat	Shank Seat


Step 1 Remove wheel covers (if equipped) and one lug nut/bolt from each wheel. If studs are rusty, clean with a wire brush prior to installing wheel locks. Do not lubricate threads. Note: Wheel locks should always be the last nut/bolt tightened on each wheel and should be the first one loosened.	Step 2 By hand, install one McGard Wheel Lock onto each wheel to replace the lug nut/bolt removed in step 1. Use only one lock per wheel. Note: If original lug nuts/bolts use a washer/plastic cap, be sure to install the washer/plastic cap included in package onto the wheel locks. Notice: Air impact guns should not be used for installation of locks or lug nuts/bolts. Use of an impact gun for installation may cause over tightening resulting in difficulty of removal and permanent damage to the lock and key. Overtightening can also cause damage to brake rotors and wheel seats.	Step 3 Using the McGard key and a lug wrench, tighten each lock to the torque specified in your vehicle owner’s manual. Be sure to keep the key pattern squarely engaged into the lock pattern via direct inward pressure. For best results, use a torque wrench and socket for final tightening. Wheel locks should be re-torqued after 25 miles(40Km) of driving. Newly installed lug nuts/bolts should also be re-torqued.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.