Kingoo Excellent Projector Lamp for Mitsubishi HC5500 915D116O10 Replacement Projector Lamp Bulb with Housing

Kingoo For VLT-HC5000LP / 915D116O10 Lamp

Most Suitable: For MITSUBISHI HC4900,HC5000,HC500BL,HC5500,HC6000 Lamp.

A+ Quality: Assembled with Superior Components Producing a Crystal Clear, Brighter Picture with Longer Lasting Performances. Ensuring stabler, longer-lasting brightness levels than typical generic bulbs on the market.

Long Lasting: The lamp hours about 3000-4000 hours.Average tested usage lifespan of over 3000 hours (4000 hours in ECO mode)

Product Description:It was not only a bare bulb,it is with housing. with a few simple steps you can seamlessly replace the original lamp.

Retail Price: $ 137.77

Wholesale Price: Inquire Now

Specifications:

Package: 1*bulb with housing

Application: Business&Education&Home&School

Product description:It was not only a bare bulb,it is with housing. Pretty easy to install and match your correct projector model.

Compatible Models: Fit for MITSUBISHI HC4900 , HC5000 , HC500BL , HC5500 , HC6000 Projector Lamp.


Extended Lamp Life Energy saving up to 70% under the ECO mode,meanwhile the lamp hours extended at the largest about 3500 hours.even if you spent four hours on keeping watching a film everyday,the lamp will be last at least a long time. Hence an extra replacement lamp you had earned.	Full of Vigorous, True Colors Assembled with Superior Components Producing a Crystal Clear, Brighter Picture with Longer Lasting Performances. Compatible Replacement Lamp with Housing Excellent Light Distribution Crystal Clear Picture Brighter Picture *Longer Lasting	Backup You never know when your lamp might fail so its smart to keep a spare one at your presentation facility or carry a backup on business trips . This replacement lamp is a lifesaver if your lamp burns out. This durable lamp will give you thousands of hours of excellent crisp clear brightness.

How to Install a New Lamp

Make sure the projector is powered down (if in use, wait at least 10 minutes for the lamp to cool) and for added precaution remove the power cable.
Turn the unit over and locate the lamp panel, once located, unscrew and remove the cover.
Unscrew the 2-3 screws holding the lamp in place and carefully slide the lamp out of the projector.
Remove the new lamp from its packaging.Make sure not to directly touch the lamp only the outer casing.Oils and debris from hands and fingers will cause "hot spotting" which will lead to overheating and ultimately decreased lamp life.
Alight the guides on the new lamp holder with the guides inside the unit and gently slide the lamp into place.
Insert and tighten the screws on each side of the lamp holder.When replacing the lamp housing make sure the new housing is secure and seated completely before operation.
Place the cover back on the unit and re-install the screws.
After the unit powers on, locate the lamp counter in the menu and reset the counter to zero.

Additional Tips

Keep the new lamp in the packaging until you are ready to install it to avoid possible damage to the lamp.

One of the most common mistakes made during installation is accidently touching the glass on the new lamp. Do not touch the new lamp at any point with your bare hands, it is even recommended to wear gloves for this process. Oils from your skin will cause "hot spotting" on the lamp which increases the stress on certain areas of the lamp due to overheating which will result in significantly reduced lamp life.

If unfamiliar with the wiring, make sure to mark each cable on the back of the projector before removing the cables.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Kingoo Excellent Projector Lamp for Mitsubishi HC5500 915D116O10 Replacement Projector Lamp Bulb with Housing

BEST SELLERS

Product introduction

Shipping Notices

Replacement Lamp Module

Product Description

Specifications:

Package: 1*bulb with housing

Application: Business&Education&Home&School

Product description:It was not only a bare bulb,it is with housing. Pretty easy to install and match your correct projector model.

Compatible Models: Fit for MITSUBISHI HC4900 , HC5000 , HC500BL , HC5500 , HC6000 Projector Lamp.


Extended Lamp Life Energy saving up to 70% under the ECO mode,meanwhile the lamp hours extended at the largest about 3500 hours.even if you spent four hours on keeping watching a film everyday,the lamp will be last at least a long time. Hence an extra replacement lamp you had earned.	Full of Vigorous, True Colors Assembled with Superior Components Producing a Crystal Clear, Brighter Picture with Longer Lasting Performances. Compatible Replacement Lamp with Housing Excellent Light Distribution Crystal Clear Picture Brighter Picture *Longer Lasting	Backup You never know when your lamp might fail so its smart to keep a spare one at your presentation facility or carry a backup on business trips . This replacement lamp is a lifesaver if your lamp burns out. This durable lamp will give you thousands of hours of excellent crisp clear brightness.

How to Install a New Lamp

Make sure the projector is powered down (if in use, wait at least 10 minutes for the lamp to cool) and for added precaution remove the power cable.
Turn the unit over and locate the lamp panel, once located, unscrew and remove the cover.
Unscrew the 2-3 screws holding the lamp in place and carefully slide the lamp out of the projector.
Remove the new lamp from its packaging.Make sure not to directly touch the lamp only the outer casing.Oils and debris from hands and fingers will cause "hot spotting" which will lead to overheating and ultimately decreased lamp life.
Alight the guides on the new lamp holder with the guides inside the unit and gently slide the lamp into place.
Insert and tighten the screws on each side of the lamp holder.When replacing the lamp housing make sure the new housing is secure and seated completely before operation.
Place the cover back on the unit and re-install the screws.
After the unit powers on, locate the lamp counter in the menu and reset the counter to zero.

Additional Tips

Keep the new lamp in the packaging until you are ready to install it to avoid possible damage to the lamp.

If unfamiliar with the wiring, make sure to mark each cable on the back of the projector before removing the cables.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.