Installation Instructions:
Step 1:Clean windows,measure and cut the exact dimensions of your windows.
Step 2: Spray a lot of soapy water on the window, Peel off the backing transparent protective film,Spray soapy water onto the back side of the static film
Step 3: Pick up two corners of the wet film, paste the film to the window and use your hand to press it from the top down so that it can tightly attach to the surface.Make sure the four corners are steadily adhered to the glass, trim off the margins, leaving 2-3 mm gap from the edge of the glass to the film.
NOTICE:THE SIDE PEELED OFF FROM THE FILM SHOULD BE ATTACHED TO THE GLASS.
Step4: Spray the water onto the surface facing you,use squeegee to remove water and air bubbles away,prevent damaging window film.Wipe out surface water with a lint free towel.
Useful Tips:
Spray more water on the glass and film, keep extremely wet during install. If it become dry, re-wet it before applying.
Spray more water on the glass and surface of the film, enough water can easily scrape all the bubbles out.