Briggs & Stratton 305447-3075-G1 479cc 16.0 Gross HP Vanguard Engine With A 1-Inch Diameter X 2-29/32-Inch Length Crankshaft, Keyway, Tapped 3/8-24

Dura-Bore cast iron cylinder sleeve for extended life

Float carburetor for consistent easy starting

12 Volt electric start

Dual-Clean air cleaner pleated paper filter with a foam pre-cleaner ensures maximum protection for extended engine life

CARB Compliant

style:

Engine

Retail Price: $ 1150.4

Wholesale Price: Inquire Now

Repowering your equipment with Briggs & Stratton

Briggs & Stratton engines are the perfect small engines to power the equipment you use to maintain your home and yard, like a garden tiller, log splitter, pressure washer, water pump or portable generator. Count on our versatile and durable utility engines to perform consistently and start easily, no matter how tough the job.


Engine Selection Match the engine’s performance and cost to your specific application to get the optimum performance at an affordable price. That means better value for you. Vanguard OHV (overhead valve) engines are maximum performance, cast iron sleeved engines. Select for continuous heavy duty applications. Professional Series, Commercial Series (Industrial/Commercial) engines are cast iron sleeved. Select for medium duty commercial, industrial and rental use. Intek and Powerbuilt engines are aluminum cylinder bore OHV engines. Select for general consumer use. Standard engines are aluminum cylinder bore, side valve engines. Select for general consumer use.	Engine Installation It is important to maintain the original engine’s size, starter type and position, fuel tank location, fuel line routing, muffler location, exhaust direction and muffler accessories (i.e., deflector, spark arrester, etc.). Reinstall all guards, shields and safety devices. Replace missing, worn or damaged parts.	Horizontal Crankshaft Engines Compare the overall engine size to avoid possible mounting interference. Match the crankshaft A - Diameter B - Height (distance from base to crankshaft center line) C - Length (distance from oil seal/cover’s mounting face to end of crankshaft) Match the crankshaft type, i.e., keyway, tapered or threaded Match the crankcase cover’s tapped holes for mounting accessories (if applicable) Match the base mounting dimensions and bolt hole spacing	Engine Maintenance Regular lawn mower maintenance helps prevent problems, plus lengthens the life of your lawn equipment. But even with plenty of TLC, normal wear and tear from hours of mowing the lawn increases the chances of hitting a glitch from time to time. We recommend using our maintenance kits to ensure your engine is running smoothly all season long.

Engine Replacement Assistance

If you are unsure which replacement engine can be used for your equipment, or would like to know if you can upgrade your existing engine, please feel free to ask questions by contacting Briggs & Stratton for assistants.

Information Needed for Engine Replacement Assistance:

In order to assist you with locating a replacement engine and short block, include as many engine specifications as you can:

If replacing a Briggs & Stratton manufactured engine, provide the engine's complete, Stamped Engine Model, Type, and Code numbers.
If not a Briggs & Stratton manufactured engine, provide the engine brand, power rating, and model number. (ex. Tecumseh 10 HP Model HMSK 22-22222d).
Equipment information including brand name, type and model numbers (ex. John Deere Model 316 lawn tractor).

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Briggs & Stratton 305447-3075-G1 479cc 16.0 Gross HP Vanguard Engine With A 1-Inch Diameter X 2-29/32-Inch Length Crankshaft, Keyway, Tapped 3/8-24

BEST SELLERS

Product introduction

Shipping Notices

Try our 479cc 16.0 Gross HP Vanguard Engine 1-inch diameter by 2-29/32-inch Length Crankshaft Keyway, and Tapped 3/8-24. This engine is designed to dependably take on the most demanding commercial applications. Energetic and quick starting, this powerhouse features a number of advanced technologies and integrated components that are proven to elevate the reliability standard, which helps hardworking people get a lot more done in less time. Some features include, full pressure lubrication with spin-on oil filter, Oil Gard low oil shutdown system, mechanical governor and compression release, and a high-efficiency head design. Buyer protection package provides two-year commercial engine warranty. 50-State CARB Compliant.

From the manufacturer

Repowering your equipment with Briggs & Stratton


Engine Selection Match the engine’s performance and cost to your specific application to get the optimum performance at an affordable price. That means better value for you. Vanguard OHV (overhead valve) engines are maximum performance, cast iron sleeved engines. Select for continuous heavy duty applications. Professional Series, Commercial Series (Industrial/Commercial) engines are cast iron sleeved. Select for medium duty commercial, industrial and rental use. Intek and Powerbuilt engines are aluminum cylinder bore OHV engines. Select for general consumer use. Standard engines are aluminum cylinder bore, side valve engines. Select for general consumer use.	Engine Installation It is important to maintain the original engine’s size, starter type and position, fuel tank location, fuel line routing, muffler location, exhaust direction and muffler accessories (i.e., deflector, spark arrester, etc.). Reinstall all guards, shields and safety devices. Replace missing, worn or damaged parts.	Horizontal Crankshaft Engines Compare the overall engine size to avoid possible mounting interference. Match the crankshaft A - Diameter B - Height (distance from base to crankshaft center line) C - Length (distance from oil seal/cover’s mounting face to end of crankshaft) Match the crankshaft type, i.e., keyway, tapered or threaded Match the crankcase cover’s tapped holes for mounting accessories (if applicable) Match the base mounting dimensions and bolt hole spacing	Engine Maintenance Regular lawn mower maintenance helps prevent problems, plus lengthens the life of your lawn equipment. But even with plenty of TLC, normal wear and tear from hours of mowing the lawn increases the chances of hitting a glitch from time to time. We recommend using our maintenance kits to ensure your engine is running smoothly all season long.

Engine Replacement Assistance

Information Needed for Engine Replacement Assistance:

In order to assist you with locating a replacement engine and short block, include as many engine specifications as you can:

If replacing a Briggs & Stratton manufactured engine, provide the engine's complete, Stamped Engine Model, Type, and Code numbers.
If not a Briggs & Stratton manufactured engine, provide the engine brand, power rating, and model number. (ex. Tecumseh 10 HP Model HMSK 22-22222d).
Equipment information including brand name, type and model numbers (ex. John Deere Model 316 lawn tractor).

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.