Q: What measures should be taken when the temperature of the incubator is not constant?
A:1、The factory temperature setting is about 38 degrees Celsius (the recommended egg is 38 degrees, if there are other types of eggs, you need to adjust according to the recommended temperature.)
2、 For "inaccurate" temperature readings, after a period of time, the sensors of other thermometers may begin to provide erroneous readings of one or two degrees. If they are not captured in time, the hatching rate may be affected. This is not only a problem with our products, but also with other incubators and other thermometers.
We recommend that you purchase an additional thermometer for measurement while incubating.
TIPS: The external environment may affect the temperature inside the incubator. When the ambient temperature is lower than 25°C (77°F), it is best to take heat preservation measures. When the device is placed in clothes or other warm places, the temperature uniformity is good, and it also helps to save energy and reduce heat dissipation. And if the ambient temperature reaches 37°C ((98.6 F)), the temperature of our incubator may reach 41-43°C (105.8-109.4 F). It is best to use it in a cool place.
Q:Questions about the humidity setting?
A:There is no humidity setting in this incubator. You can add a hygrometer inside as needed, and then adjust the water volume to control the humidity. After finding a certain pattern, you can check the temperature every day and add an appropriate amount of water as needed to keep the humidity at about 55%. This will vary depending on location and weather.