RICHEN Boresnake Gun Cleaning,Gun Barrel Cleaner,Gun Bore Cleaner for Rifle/Pisto/Shotgun
SAVES TIME: One pull of our gun cleaning kit takes the place of rod,brush and patch.Cleans gun bores within 10 seconds, save you a ton of time.
LESS MESS: Oily patches stacked as high as Mt.EverestAll needless frustration.Our cleaning kit does the job of the older traditional equipment,but with less mess and in a fraction of the time.
Built-in bore brushes, brushes and swabs bore in one quick pass.Multiple short brushes embedded in the floss pass easily through the shortest action or port.
OUR PROMISE:If for any reason you are not 100% satisfied with your Richen Products,please let us know and we will immediately refund your purchase price - no questions asked.
1.Apply a few drops of bore cleaner to the front of the Snake.
2.Drop the brass weight at the end of the Bore Cleaner's black pull cord through the breach at the rear of the barrel and then begin to feed the pull cord down the length of the barrel until the brass weight comes out the end.
3.Grasp the weight and pull it slightly until you can grasp the pull cord as well.
4.Wrap the pull cord around your dominant hand and then continue pulling so that the Bore Cleaner braided nylon floss sweeps through the entire barrel and pull out completely from the end.
5.Repeat the cleaning process as needed and then apply lubricant to the end of cord and pull it through the bore one last time to oil and polish.
Attention:
Be sure firearm is NO-uploaded before cleanup;
Verify your gun Barrel is free of obstructions after use of this product;and before firing.
Keep this product out of reach of children;
Use the Gun Barrel Cleaners only on recommended calibers.
This Bore Cleaner is easier to employ overall and there is much less risk of a risk of damaging your gun. You could quickly clean the bore from the chamber end as haven't to remove the lever and bolt.
The Bore Cleaner Snake is also useful at hunt camp, when at day's end the ol' popper needs a quick de-skanking, or when you've been out in the rain and need to quickly dry the bore of your thunderstick. When your Bore Cleaner gets too nasty for your taste, just wash it up, let it dry, and you're ready to go again.
1.Apply a few drops of bore cleaner to the front of the Snake.
2.Drop the brass weight at the end of the Bore Cleaner's black pull cord through the breach at the rear of the barrel and then begin to feed the pull cord down the length of the barrel until the brass weight comes out the end.
3.Grasp the weight and pull it slightly until you can grasp the pull cord as well.
4.Wrap the pull cord around your dominant hand and then continue pulling so that the Bore Cleaner braided nylon floss sweeps through the entire barrel and pull out completely from the end.
5.Repeat the cleaning process as needed and then apply lubricant to the end of cord and pull it through the bore one last time to oil and polish.
Attention:
Be sure firearm is NO-uploaded before cleanup;
Verify your gun Barrel is free of obstructions after use of this product;and before firing.
Keep this product out of reach of children;
Use the Gun Barrel Cleaners only on recommended calibers.
This Bore Cleaner is easier to employ overall and there is much less risk of a risk of damaging your gun. You could quickly clean the bore from the chamber end as haven't to remove the lever and bolt.
The Bore Cleaner Snake is also useful at hunt camp, when at day's end the ol' popper needs a quick de-skanking, or when you've been out in the rain and need to quickly dry the bore of your thunderstick. When your Bore Cleaner gets too nasty for your taste, just wash it up, let it dry, and you're ready to go again.
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.