Forney 71819 Grinding Wheel with 5/8-Inch-11 Threaded Arbor, Metal Type 27, A24R-BF, 4-1/2-Inch-by-1/4-Inch
  • Aluminum oxide metal grinding wheel
  • Designed for metal grinding, metal abrasion, body work, metal fabrication and general repair work
  • Used on ferrous materials
size:
  • 4-1/2-Inch
Retail Price: $ 7.29
Wholesale Price: Inquire Now
Forney 71819 Grinding Wheel with 5/8-Inch-11 Threaded Arbor, Metal Type 27, A24R-BF, 4-1/2-Inch-by-1/4-Inch
Forney 71819 Grinding Wheel with 5/8-Inch-11 Threaded Arbor, Metal Type 27, A24R-BF, 4-1/2-Inch-by-1/4-Inch
The Forney 71819 4-1/2-inch type 27 Mounted steel grinding wheel is an aluminum oxide metal grinding wheel. Designed for metal grinding, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. For use on right angle grinders. 4-1/2-inch (114.3 mm) by 1/4-Inch (6.35 mm) with 5/8-inch -11 threaded arbor. A24r-bf with max 13, 300 RPM. Typical spec example a24r-bf: a=used for steel, 24=grit (coarse), medium to hard BOND. The first series of letters indicates grain type; aluminum oxide (used in metal applications) Silicon carbide (Used for masonry applications) ZA= alumina zirconium used for (stainless steel and ferrous metal applications) ta=ceramic treated aluminum Oxide (used for metal applications) The second series of letters indicates grain size or grit; 8-24=coarse, 30-60=medium, 70-180=fine and 220-up=hard. The third Series of letters indicates BOND hardness; a-n=soft, o-s=medium and t-z=hard. The fourth Series of letters indicates type of BOND; bf=retinoid fiberglass reinforced (double bonded), e=shellac, rubber and v=vitrified. Wheel types; type 1=flat wheel for cutting, type Depressed center wheel, Type 28=hat shaped for grinding and type 29=flap disc for grinding and finishing. Note: harder wheel have a longer life where a softer wheel will cut faster. Fine grain=long life=slower cutting and grinding. Coarse grain=short life=fast cutting or grinding. Claims for warranty must be made within 90 days of the date of purchase. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.

From the manufacturer

TYPE Type 29 Type 27 Type 28 Type 11 Type 1
A small or large angle grinder is recommended for Type1, Type 11, Type 27, Type 28 and Flap disc with a flexible design for smoothing and grinding contoured surfaces Depressed center wheel for grinding, notching and cutting Saucer-shaped grinding wheel for greater coverage and improved user visibility Flaring cup for grinding and snagging over large surface areas. Disc with mounting hole
Type 29 grinding and cut-off wheels. 12-inch and 14-inch cut-off wheels can be used with Reversed, saucer-shaped grinding rims Depressed center Depressed center Cup wheel Also called a straight wheel
chop saws, portable saws and 'road saws' depending on application combo 1/8" Specifically designed for use on cutting machines Similar to the Type 27 wheel but angled upward and away from mounting hole Designed for removal of large amounts of stock Grinding done on the periphery (outside curve) of the wheel
In all cases of the use of any blade, the type of tool will be indicated on the label Tool to use: Angle grinder Manufactured with flat grinding rims/faces and designed for: side grinding when held at a slight angle and may be used flat when grinding concrete Saucer-shaped grinding rim designed for corner grinding and side grinding Tool to use: Angle grinder cut-off under 1/8"
Be sure not to exceed maximum RPM requirements stated on the wheel Position: 15° grinding 1/4" combo 1/8" and cut-off under 1/8" grinding 1/4" Position: 30° Tool to use: Angle grinder
Tool to use: Angle grinder Tool to use: Angle grinder Position: 90°
Position: 30° 15°
Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.
After Sale Service:
1 Insurance Policy: Learn more
2 The rules apply and summit for receive compensation
3 The conditions of accrual for amount insurance
3 The conditions of accrual for amount insurance
5 Damage to the parcel during international shipping, which resulted in damage to the goods in it
6 Loss of individual goods under international shipment The absence individual goods in the parcel
7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment
8 Returns Policy: Learn more
Inquire Now
X

Contact us now