- Pin drive anchor provides a secure hold in normal weight concrete, lightweight concrete, and solid masonry
- Anchor consists of a hot rolled steel body and a hot wrought iron pin, which drives into the anchor with a hammer (sold separately) expanding the anchor body within the mounting material
- Meets Fed. Spec. GSA FFS-325 Group II, Type 4, Class 1 specifications
- Nut adjusts the anchor tension when installed and has serrations on the underside that grip the mounting surface for vibration resistance
- Anchor is installed properly when the pin is flush against the anchor's nut, enabling for accurate and quick inspection
BEST SELLERS
The Wej-It Strike-It CP5623 pin drive anchor is made of hot rolled steel and hot wrought iron, provides a secure hold in normal weight concrete, lightweight concrete, and solid masonry, and meets Federal Specification GSA FFS-325 Group II, Type 4, Class 1. The anchor consists of a hot rolled steel body and a hot wrought iron pin, which drives into the anchor with a hammer (sold separately) to expand the anchor body within the mounting material and hold it in place. The anchor also includes a nut that adjusts the anchor tension once installed and is serrated on the underside to grip the mounting surface for vibration resistance. The anchor is installed properly when the pin is flush against the nut, enabling accurate and quick inspection.
| Specifications | ||||||
|---|---|---|---|---|---|---|
| Anchor Part Number | Maximum Thickness Fastened | Minimum Embedment Depth | Ultimate Tensile Strength of Static Loads in 2,000-psi Concrete at Embedment Depth | Ultimate Shear Strength of Static Loads in 2,000-psi Concrete at Embedment Depth | Ultimate Tensile Strength of Static Loads in 4,000-psi Concrete at Embedment Depth | Ultimate Shear Strength of Static Loads in 4,000-psi Concrete at Embedment Depth |
| CP1413 | 3/8" | 1-1/8" | 780 lb. at 1-1/8" | 1,000 lb. at 1-1/8" | 1,567 lb. at 1-1/8" | 1,000 lb. at 1-1/8" |
| CP1423 | 1" | 1-1/8" | 780 lb. at 1-1/8" | 1,000 lb. at 1-1/8" | 1,567 lb. at 1-1/8" | 1,000 lb. at 1-1/8" |
| CP5620 | 5/16" | 1-3/8" | 2,130 lb. at 1-1/2" | 1,320 lb. at 1-1/2" | 3,159 lb. at 1-1/2" | 1,320 lb. at 1-1/2" |
| CP5623 | 11/16" | 1-3/4" | Not Available | Not Available | Not Available | Not Available |
| CP3823 | 5/8" | 1-3/8" | 2,530 lb. at 1-7/8" | Not Available | 3,307 lb. at 1-7/8" | 3,580 lb. at 1-7/8" |
| CP3832 | 1-3/8" | 1-3/4" | 2,530 lb. at 1-7/8" | Not Available | 3,307 lb. at 1-7/8" | 3,580 lb. at 1-7/8" |
| CP3843 | 2-5/8" | 1-3/4" | 2,530 lb. at 1-7/8" | Not Available | 3,307 lb. at 1-7/8" | 3,580 lb. at 1-7/8" |
| CP1223 | 1/4" | 2" | 4,040 lb. at 2-1/2" | 4,920 lb. at 2-1/2" | 5,604 lb. at 2-1/2" | 4,920 lb. at 2-1/2" |
| CP1232 | 3/4" | 2-1/4" | 4,040 lb. at 2-1/2" | 4,920 lb. at 2-1/2" | 5,604 lb. at 2-1/2" | 4,920 lb. at 2-1/2" |
| CP1243 | 2" | 2-1/4" | 4,040 lb. at 2-1/2" | 4,920 lb. at 2-1/2" | 5,604 lb. at 2-1/2" | 4,920 lb. at 2-1/2" |
| CP1260 | 3-1/4" | 2-1/4" | 4,040 lb. at 2-1/2" | 4,920 lb. at 2-1/2" | 5,604 lb. at 2-1/2" | 4,920 lb. at 2-1/2" |
| CP5840 | 1-5/8" | 2-3/4" | 6,360 lb. at 2-3/4" | 9,200 lb. at 2-3/4" | 7,742 lb. at 2-3/4" | 9,200 lb. at 2-3/4" |
| CP5860 | 2" | 2-3/4" | 6,360 lb. at 2-3/4" | 9,200 lb. at 2-3/4" | 7,742 lb. at 2-3/4" | 9,200 lb. at 2-3/4" |
| CP3450 | 2" | 3-1/2" | 8,700 lb. at 3-1/2" | 11,400 lb. at 3-1/2" | 12,083 lb. at 3-1/2" | 11,400 lb. at 3-1/2" |
| CP3460 | 2" | 3-1/2" | 8,700 lb. at 3-1/2" | 11,400 lb. at 3-1/2" | 12,083 lb. at 3-1/2" | 11,400 lb. at 3-1/2" |
| CP3472 | 2" | 3-1/2" | 8,700 lb. at 3-1/2" | 11,400 lb. at 3-1/2" | 12,083 lb. at 3-1/2" | 11,400 lb. at 3-1/2" |
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the specifications sheet.
Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.
Wej-It Fastening Systems manufactures mechanical and adhesive fasteners for use in concrete and drywall. The company, founded more than 60 years ago, is headquartered in Norwalk, CT.
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
