HOW TO SET UP YOUR ATOMI SMART AIR CONDITIONER CONTROLLER
- Download the FREE Atomi Smart app
- Register by following the on-screen instructions
- Create a Family and log into the app
- Plug in your AC Controller to any standard US grounded 120v outlet
- Connect the micro-USB cable to the Smart AC Controller and the Smart AC Wall Plate (included)
- Select "ADD DEVICE" or "+"
- Choose "Smart AC Controller" from the list of Atomi Smart devices
- Press and HOLD the POWER button for 5 Seconds, until the indicator light is flashing rapidly, then press "Continue"
- Enter your Wi-Fi network and password when prompted
- The Atomi Smart app will connect to your Smart AC Adaptor
**IF SET-UP FAILS AT THIS POINT, REPEAT AGAIN: BEGIN WITH STEP 7 AND CONTINUE AS FOLLOWS**
- After choosing "Smart AC Controller" from the list of Atomi Smart devices, press "Can't connect? Try AP Mode" in the middle of your screen
- Press and HOLD the POWER button for 5 Seconds, until the indicator light is flashing rapidly. Release the power button.
- Press and HOLD the POWER button for an additional 10 Seconds, until the indicator light is flashing slowly, then press "Continue"
- Enter your Wi-Fi network and password when prompted
- Press "Go Connect"
- Navigate to your phone's Wi-Fi settings, and select a Wi-Fi network named "atomi-smart-xxx"
- Once connected to this new Wi-Fi access point, navigate back to the Atomi Smart app
- The Atomi Smart app will connect to your Smart AC Adaptor
ONCE YOUR AC CONTROLLER IS SUCCESSFULLY CONNECTED TO YOUR HOME WIFI:
- Plug in your air conditioner
- Based on the style of your AC's remote, choose the correct option: "No LCD Screen" or "with LCD Screen" and select "Continue"
- Follow the on-screen prompts to pair your remote with the Atomi Smart AC Controller
YOU'RE ALL SET!