5 GAL Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer

Retail Price: $ 224.75

The Armor AR350 is a solvent based acrylic wet look sealer that is designed to seal, enhance, and protect a variety of interior and exterior surfaces. The Armor AR350 penetrates deep into the surface where it chemically bonds to the pores of the concrete and pavers, creating a long lasting, non-yellowing, breathable finish that enhances dull or faded surfaces by creating a darkened wet look, and low gloss finish.

Benefits:

Made from non-recycled US manufactured resins
Breathable, low VOC
Can be applied with a roller or sprayer
Non-yellowing and UV resistant
Will reduce concrete dusting and deterioration caused by surface abrasion
Offers resistance to water, stains, some chemicals, and salt damage
Offers superior adhesion to a variety of concrete and paver surfaces
Will bring out the color in dull or faded concrete and pavers by darkening them to give them a "wet look"
Offers a durable low gloss finish
Self-priming, easy recoat and low maintenance
When properly applied can last up to 2-5 years before the need for a recoat
Can be applied to unsealed surfaces, or surfaces previously sealed with a solvent based acrylic

Uses & How to Apply

The Armor AR350 is a fantastic sealer for poured concrete, stamped concrete, aggregate concrete, and concrete paver surfaces. It can be applied to unsealed surfaces as well as surfaces previously sealed with a solvent based acrylic.

Coverage:

One gallon of the Armor AR350 will cover up to 200 square feet per coat. Two coats are recommended to achieve the maximum life and performance benefits. Coverage can vary depending on the porosity of substrate and the application method.

How to Apply:

First, make sure that the surface is clean and free of any contaminants that could prevent proper penetration or adhesion. If the surface was wet, allow at least 24 hours to dry.
In the late afternoon or evening, when the surface has had time to cool down from exposure to the sun, apply the first coat using a 3/8" nap roller or solvent-resistant HVLP sprayer. Wait 24 hours and repeat with a second coat.
Allow the surface 48 to dry before introducing it to water, foot, or vehicle traffic.

Frequently Asked Questions

Will the surface be slippery when wet? Yes, the surface may be slippery when wet because the sealer prevents water from absorbing into the surface. Foundation Armor manufactures a fine non-slip additive and a coarse non-slip additive that can easily be mixed into the sealer before applying.

How long does the sealer last? The Armor AR350 can last up to 2-5 years before the need to reseal. Surface porosity, environment, surface abrasion, and the amount of material applied will ultimately determine the life of the sealer. Typically, exterior substrates are sealed every 1-3 years and interior substrates are sealed every 3-7 years.

Is the Armor AR350 breathable? Yes, the Armor AR350 is a breathable acrylic sealer.

Is the Armor AR350 UV stable? Yes, the Armor AR350 is UV stable and will not yellow from exposure to UV rays.

What if I want a high gloss? If you want a high gloss consider the Armor AR500 instead.

About Foundation Armor

Foundation Armor is a family owned and operated business. We take pride in the quality of our products, the accuracy of our information, and the honesty of our technicians and sales staff. We will never promise a product will do something it can’t, we won’t make false claims or warranties, and we won’t sell you a product if it isn’t appropriate for your application. Our products are manufactured in the USA, and we don’t use any recycled or imported resins in any of our formulas. We are always available to our customers to help with everything from product selection and application, to maintenance and reapplication. Our customers are our top priority and your satisfaction is very important to us!

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

5 GAL Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Benefits:

Made from non-recycled US manufactured resins
Breathable, low VOC
Can be applied with a roller or sprayer
Non-yellowing and UV resistant
Will reduce concrete dusting and deterioration caused by surface abrasion
Offers resistance to water, stains, some chemicals, and salt damage
Offers superior adhesion to a variety of concrete and paver surfaces
Will bring out the color in dull or faded concrete and pavers by darkening them to give them a "wet look"
Offers a durable low gloss finish
Self-priming, easy recoat and low maintenance
When properly applied can last up to 2-5 years before the need for a recoat
Can be applied to unsealed surfaces, or surfaces previously sealed with a solvent based acrylic

Uses & How to Apply

Coverage:

How to Apply:

First, make sure that the surface is clean and free of any contaminants that could prevent proper penetration or adhesion. If the surface was wet, allow at least 24 hours to dry.
In the late afternoon or evening, when the surface has had time to cool down from exposure to the sun, apply the first coat using a 3/8" nap roller or solvent-resistant HVLP sprayer. Wait 24 hours and repeat with a second coat.
Allow the surface 48 to dry before introducing it to water, foot, or vehicle traffic.

Frequently Asked Questions

Is the Armor AR350 breathable? Yes, the Armor AR350 is a breathable acrylic sealer.

Is the Armor AR350 UV stable? Yes, the Armor AR350 is UV stable and will not yellow from exposure to UV rays.

What if I want a high gloss? If you want a high gloss consider the Armor AR500 instead.

About Foundation Armor

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.