Lumishore SMX153 Color-Change Underwater Light

Complete kit: includes components needed to install two SMX153 eos color change underwater lights in your boat. Includes Hub that will accommodate up to four lights, making the kit easily expandable for additional lights.

SIMPLE TO USE: Control with the included STV2204-i Lumi-Link Display or control via Wi-Fi control with smart phone or tablet

Long life & reliability: 50, 000 hour LED Life with advanced technologies such as hicob LED array, advanced thermal Management, reverse polarity protection, voltage surge and low voltage protection, power line noise suppression, IP68 waterproof rated

Easy to install: SMX153 surface mount underwater lights utilize a small hole 17/32\" Through the hull for the light wires. Wires are plug and play for easy connection.

Assurance: Lumishore stands behind its products with a 2 year on the SMX153 eos two light kit.

Retail Price: $ 2999.99

Wholesale Price: Inquire Now

Lumishore

The Lumishore team combines leading-edge LED underwater lighting expertise with a passion for boating and the marine environment. For over 10 years, Lumishore engineers have focused on the design, development and manufacture of the brightest, best and most advanced underwater lighting products available today. They also believe in providing these solutions at a price you can afford. This passion is apparent in the quality and value of the Lumishore line of underwater lighting products.

Lumishore SMX153

EOS Two Light Kit

Full-featured EOS Series integrated lighting systems provide unprecedented color control and ease of use, giving the user the ability to create any color. Simple plug-and-play installation and setup makes this kit suitable for do-it-yourself boat owners. SMX153 EOS lights can be powered by either 12 or 24 volt DC electric systems. The included EOS i-Connect Hub can accommodate up to four underwater lights, making it easy to add additional underwater lights.


Lumishore SMX underwater light installations typically consist of 2-4 lights. On outboard powered boats, it is common to install one light on each side of the transom, and a light between each outboard motor.	For the most consistent light pool, install lights 2.5 to 3 feet apart.	Lights should be installed between 4-12 inches beneath the waterline .


Wide Beam Lumishore offers not only the best light intensity, but also a 90º Wide beam angle to penetrate farther in the water and provide an uninterrupted halo of light around your boat.	Marine Grade Bronze The Marine Grade Bronze housing is built to withstand the harshest environments while maintaining a great aesthetic look and feel.	FULL COLOR SPECTRUM Light up the water below your boat with Full RGBW color change.	Easy Install Adding underwater lighting to your vessel has never been easier - one small cable hole and three mounting screws is all it takes.


	Lumishore SMX11 Green Surface Mount	Lumishore SMX23 Supra Dual Color Surface Mount Underwater LED Light	Lumishore SMX93 Select Color	SMX53 Supra Dual Color Surface Mount Underwater LED Light for Boats
Beam Angle	60°	90°	90°	90°
Color	SINGLE COLOR (WHITE, BLUE, GREEN)	DUAL COLOR (BLUE & WHITE)	Full Spectrum RGBW Color Change	DUAL COLOR (BLUE & WHITE)
Recommended Boat Size	Boat Size 7m (25ft)	Boat Size 7.5m (25 ft)	Boat Size 7.5m (25 ft)	Boat Size 15m (50ft)
Voltage	12 V DC ONLY	10.5—14.5 V DC	12/24 V DC	12/24 V DC

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Lumishore SMX153 Color-Change Underwater Light

BEST SELLERS

Product introduction

Shipping Notices

From the manufacturer

Lumishore

Lumishore SMX153

EOS Two Light Kit


Lumishore SMX underwater light installations typically consist of 2-4 lights. On outboard powered boats, it is common to install one light on each side of the transom, and a light between each outboard motor.	For the most consistent light pool, install lights 2.5 to 3 feet apart.	Lights should be installed between 4-12 inches beneath the waterline .


Wide Beam Lumishore offers not only the best light intensity, but also a 90º Wide beam angle to penetrate farther in the water and provide an uninterrupted halo of light around your boat.	Marine Grade Bronze The Marine Grade Bronze housing is built to withstand the harshest environments while maintaining a great aesthetic look and feel.	FULL COLOR SPECTRUM Light up the water below your boat with Full RGBW color change.	Easy Install Adding underwater lighting to your vessel has never been easier - one small cable hole and three mounting screws is all it takes.


	Lumishore SMX11 Green Surface Mount	Lumishore SMX23 Supra Dual Color Surface Mount Underwater LED Light	Lumishore SMX93 Select Color	SMX53 Supra Dual Color Surface Mount Underwater LED Light for Boats
Beam Angle	60°	90°	90°	90°
Color	SINGLE COLOR (WHITE, BLUE, GREEN)	DUAL COLOR (BLUE & WHITE)	Full Spectrum RGBW Color Change	DUAL COLOR (BLUE & WHITE)
Recommended Boat Size	Boat Size 7m (25ft)	Boat Size 7.5m (25 ft)	Boat Size 7.5m (25 ft)	Boat Size 15m (50ft)
Voltage	12 V DC ONLY	10.5—14.5 V DC	12/24 V DC	12/24 V DC

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.