Note:
1. Connect the light in the direction indicated by the arrow. If the connection is not "arrow to arrow", the light won’t work.
2. Please clean the surface before installation, and make sure the surface clean, flat and dry before sticking the light strips. do not over-install or bend to avoid interruption of the signal circuit.
3. Cut the strip light at the cut marks. Please make sure the power off first, then cut the light strip. If you cut them, you will need one more power adapter to light the rest strip up.
4.Make sure the “+” correspond with the connector. Make sure that the positive and negative wires of the two parts of the light strip are the same. Next is to ensure that the iron piece on the connector is pressed against the copper piece of the light strip.
5. We do not recommend connecting multiple light strips, as the current may not be sufficient to support multiple light strips, which may cause the light strips to become dark or damaged.
6.Our led strip lights has IP65 waterproof grade, Can be used for daily waterproof but it is recommended not to soak in water for a long time. Note: power supply and signal receiver are non-waterproof, led strip lights both ends not waterproof.