Dash Cam Hardwire Kit, Micro USB & Mini USB Hard Wire Kit Fuse for Dashcam, Dash Camera Charger Power Cord, （13ft）

Retail Price: $ 13.99

Product description
This dash cam hardwire kit suitable for 12V/24V vehicles, such as car, truck, bus, suvs, or big rig.
Can be used for all the 1 or 2 amps input Micro USB & Mini USB car devices, such as Dash Cams, GPS Navigator, Radar and Mirror Cam.

Specifications:
Connector: Mini USB / Micro USB
Input: DC 12-24V
Output: DC 5V / 2A
Working Temperature:-40-80℃
Cable Length: 13ft (4M)
Low Voltage Protection: When voltage lower than 11.6 V or 23.5 V, automatically cut off the power
Package Contents:
Dashboard Camera Hardwire Kit ( mini USB & Micro USB ports)
Fuse Tap Cable x4
Installing crowbar x1
User Manual


Easy installation Hidden wiring original car appearance beautiful and neat No need for cable from car cigarette lighter socket, replace it with a permanent hidden cable Installation in minutes with little to no expertise required. The micro USB hardwire kit with built-in precise switching power supply module can transform 12V(24V) to 5V. The built-in safeguards protect your devices against overheating.	24/7 Parking Surveillance your property is under surveillance no worry about collisions ,theft and scratch anymore	Low Voltage Protection This hardwire kit accepts voltage from any type of vehicles runs on 12 – 24V, works perfect for car, truck, bus, suvs, or big rig for continuous power. Smart low voltage protection automatically shut off the power to your dash cam when the battery voltage drops to 11.6V(12V cars) or 23.2V(24V cars), thus preventing it draining the battery.


Find the Correct Fuse Slot Open the fuse box, find the correct fuse slot for your hardwire kit. If you need to find an ignition switched fuse, put the key in the vehicle, find the fuse which is not lit up while the car is off, and test it by turning the car on to see if it lights up. If your kit requires constant power, turn off the car and remove the key to see which fuse slots stays lit on.	Connect the Red Wire Once you've determined which fuse slots you need to use for your hardwiring kit you can crimp the red wire of your hardwire kit onto the Add-A-Fuse. Gently remove the fuse you identified. Install the fuse you just removed into the installation kit add-a-fuse circuit. Plug the add-a-circuit into the fuse box in the correct orientation.	Ground the Hardwiring Kit Slip the black wire (which is in the shape of a C) under a metal bolt or screw in your vehicle (this is the ground wire). Check that it is not attached onto plastic parts. You will typically need a socket wrench to loosen the nut or bolt that you choose to ground with. To attach the grounding terminal, loosen the nut or bolt enough to slip it in and tighten it back up afterwards.


Dashboard Camera Hardwire Kit	Fuse Tap Cable x4	micro usb port	User Manual and Installing crowbar

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Dash Cam Hardwire Kit, Micro USB & Mini USB Hard Wire Kit Fuse for Dashcam, Dash Camera Charger Power Cord, （13ft）

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Product description
This dash cam hardwire kit suitable for 12V/24V vehicles, such as car, truck, bus, suvs, or big rig.
Can be used for all the 1 or 2 amps input Micro USB & Mini USB car devices, such as Dash Cams, GPS Navigator, Radar and Mirror Cam.

Specifications:
Connector: Mini USB / Micro USB
Input: DC 12-24V
Output: DC 5V / 2A
Working Temperature:-40-80℃
Cable Length: 13ft (4M)
Low Voltage Protection: When voltage lower than 11.6 V or 23.5 V, automatically cut off the power
Package Contents:
Dashboard Camera Hardwire Kit ( mini USB & Micro USB ports)
Fuse Tap Cable x4
Installing crowbar x1
User Manual


Easy installation Hidden wiring original car appearance beautiful and neat No need for cable from car cigarette lighter socket, replace it with a permanent hidden cable Installation in minutes with little to no expertise required. The micro USB hardwire kit with built-in precise switching power supply module can transform 12V(24V) to 5V. The built-in safeguards protect your devices against overheating.	24/7 Parking Surveillance your property is under surveillance no worry about collisions ,theft and scratch anymore	Low Voltage Protection This hardwire kit accepts voltage from any type of vehicles runs on 12 – 24V, works perfect for car, truck, bus, suvs, or big rig for continuous power. Smart low voltage protection automatically shut off the power to your dash cam when the battery voltage drops to 11.6V(12V cars) or 23.2V(24V cars), thus preventing it draining the battery.


Find the Correct Fuse Slot Open the fuse box, find the correct fuse slot for your hardwire kit. If you need to find an ignition switched fuse, put the key in the vehicle, find the fuse which is not lit up while the car is off, and test it by turning the car on to see if it lights up. If your kit requires constant power, turn off the car and remove the key to see which fuse slots stays lit on.	Connect the Red Wire Once you've determined which fuse slots you need to use for your hardwiring kit you can crimp the red wire of your hardwire kit onto the Add-A-Fuse. Gently remove the fuse you identified. Install the fuse you just removed into the installation kit add-a-fuse circuit. Plug the add-a-circuit into the fuse box in the correct orientation.	Ground the Hardwiring Kit Slip the black wire (which is in the shape of a C) under a metal bolt or screw in your vehicle (this is the ground wire). Check that it is not attached onto plastic parts. You will typically need a socket wrench to loosen the nut or bolt that you choose to ground with. To attach the grounding terminal, loosen the nut or bolt enough to slip it in and tighten it back up afterwards.


Dashboard Camera Hardwire Kit	Fuse Tap Cable x4	micro usb port	User Manual and Installing crowbar

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.