PWM DC Motor Speed Controller，PEMENOL PWM 7-70V 30A Speed Control Switch Adjustable PWM Motor Speed Regulator with Amp Fuse

★Wide Voltage Range： Wide voltage input 7-70V, maximum output current 30A (If the operating voltage is high, then the operating current needs to be reduced. Please use it refer to the power, which will better protect the motor and the Controller. It is recommended that 12V within 300W, 24V within 400W, 48V within 450W, and 60V within 500W.)

★Speed Control Knob：The Motor Speed Controller Switch has a knob with a switch function, which can control the motor speed from 0% to 100%. Adjustable potentiometer flexible cable can be separated, the cable length is 15cm

★Optimal design of the circuit： Wide duty cycle adjustment range; smooth motor without noise and vibration; with power indication; stable circuit design suitable for long-term work.

★Features：Adopt high-quality high voltage MOS tube, 3pcs 100V high-frequency low-resistance capacitors, automotive fuses, accurate parameters, not easy to get hot, easy to replace. With aluminum case to protect internal circuit.

★30Amp Fuse with Cable：This set contains a 30A automotive fuse with wire and cover, good quality and waterproof. It prevent shorting of the motor interface. Double protection of your Motor and Motor Speed Controller

Retail Price: $ 18.25

Wholesale Price: Inquire Now

It is a 7-70V 30A PWM DC Motor Speed Controller with 30Amp Fuse. It can drive a DC motor up to 30A with an on-board power ON-OFF switch.

It is easy to use and can be directly connected to the motor and adjust the potentiometer to adjust the motor’s speed.

Feature:

1>. On-board power ON-OFF control switch

2>. Dual 30Amp Fuse to protect circuit inside and motor

3>. DC 7-70V wide voltage so that adapt to more DC motors

4>. 30A strong current output to provide enough driving capacity for the motor

5>. Potentiometer to adjust PWM from 0% to 100% which can control motor’s speed

Used for Children's Toy Car

If the product is used in the modification of children's car, the output end of the speed controller can be connected with a Forward and Reverse Switch to realize the function of forward and reverse control.

If there is a forward and reverse circuit regulator on the children's car, please be sure to connect the speed controller in front of the forward and reverse circuit regulator of the children's car.

Otherwise, the speed controller may be damaged.

Parameter

Work Voltage: DC 7.0V~70V

Drive Current: 30A(Max)

Control Power: 12Vwithin 300W; 24V/400W; 48V/450W; 60V/500W

Duty cycle: 0%~100%(Adjustable)

Work Frequency: 12KHz

Work Temperature: -40℃~85℃

Work Humidity: 5%~85%RH

Size: 90*58*39mm

Potentiometer: D8*H16mm

Package:

1>.1pcs 7-70V 30A PWM DC Motor Speed Controller

2>.1pcs 30Amp Fuse with wire

Use Steps

1>. Select the matching power supply and DC motor.

2>. Connect DC motor and 30Amp Fuse at output terminal as wiring diagram.

3>. Turn OFF the power switch.

4>. Input work voltage at input terminal as wiring diagram.

5>. Turn ON the power switch.

6>. Adjust the potentiometer to adjust the motor’s work speed.

Note:

1>. Please pay attention to the positive and negative poles of the power supply. It can't be connected reversely.

2>. It just can input DC power. This speed controller can only drive brushed motors, not brushless motors

3>. The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent).

4>. If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward-reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged.


Adjustable potentiometer The adjustable potentiometer can be separated, and the length of the flexible cable is about 30cm. Easy to install	Multi-function switch The switch has the function of running/stop/brake, ON/OFF. Can be used for the control of kid's power wheels	30A fuse 30A Car Fuse can be widely used in circuit protection.

Feature

On-board fuse holder

On-board 30cm wire

PVC dust cover to protect fuse

High quality copper wire is embedded in the wire

Work Current:30A(Max)

Used for wire:D0.4cm

Work Temperature:-40℃~85℃

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

PWM DC Motor Speed Controller，PEMENOL PWM 7-70V 30A Speed Control Switch Adjustable PWM Motor Speed Regulator with Amp Fuse

BEST SELLERS

Product introduction

Shipping Notices

Product Description

It is a 7-70V 30A PWM DC Motor Speed Controller with 30Amp Fuse. It can drive a DC motor up to 30A with an on-board power ON-OFF switch.

It is easy to use and can be directly connected to the motor and adjust the potentiometer to adjust the motor’s speed.

Feature:

1>. On-board power ON-OFF control switch

2>. Dual 30Amp Fuse to protect circuit inside and motor

3>. DC 7-70V wide voltage so that adapt to more DC motors

4>. 30A strong current output to provide enough driving capacity for the motor

5>. Potentiometer to adjust PWM from 0% to 100% which can control motor’s speed

Used for Children's Toy Car

If there is a forward and reverse circuit regulator on the children's car, please be sure to connect the speed controller in front of the forward and reverse circuit regulator of the children's car.

Otherwise, the speed controller may be damaged.

Parameter

Work Voltage: DC 7.0V~70V

Drive Current: 30A(Max)

Control Power: 12Vwithin 300W; 24V/400W; 48V/450W; 60V/500W

Duty cycle: 0%~100%(Adjustable)

Work Frequency: 12KHz

Work Temperature: -40℃~85℃

Work Humidity: 5%~85%RH

Size: 90*58*39mm

Potentiometer: D8*H16mm

Package:

1>.1pcs 7-70V 30A PWM DC Motor Speed Controller

2>.1pcs 30Amp Fuse with wire

Use Steps

1>. Select the matching power supply and DC motor.

2>. Connect DC motor and 30Amp Fuse at output terminal as wiring diagram.

3>. Turn OFF the power switch.

4>. Input work voltage at input terminal as wiring diagram.

5>. Turn ON the power switch.

6>. Adjust the potentiometer to adjust the motor’s work speed.

Note:

1>. Please pay attention to the positive and negative poles of the power supply. It can't be connected reversely.

2>. It just can input DC power. This speed controller can only drive brushed motors, not brushless motors


Adjustable potentiometer The adjustable potentiometer can be separated, and the length of the flexible cable is about 30cm. Easy to install	Multi-function switch The switch has the function of running/stop/brake, ON/OFF. Can be used for the control of kid's power wheels	30A fuse 30A Car Fuse can be widely used in circuit protection.

Feature

On-board fuse holder

On-board 30cm wire

PVC dust cover to protect fuse

High quality copper wire is embedded in the wire

Work Current:30A(Max)

Used for wire:D0.4cm

Work Temperature:-40℃~85℃

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy