Coating Thickness Gauge Meter, Paint Tester, Car Body Damage Detector with 1500 Groups Data Logging, Trend Graph and Alarm Setting
Coating Thickness Gauge Meter, Paint Tester, Car Body Damage Detector with 1500 Groups Data Logging, Trend Graph and Alarm Setting
Retail Price: $ 138.0
Wholesale Price: Inquire Now

Introduction:

This product is a color-screen portable coating thickness gauge with high definition display, which can quickly, non-destructively and accurately measure non-magnetic coating thickness on magnetic metal substrates and non-metallic coating thickness measurement on non-magnetic metal sub-strates. At the same time this auto paint thickness gauge tester can automatically identify magnetic metal substrate and non-magnetic metal substrate, and is widely used in manufacturing, metal processing industry,chemical industry, commodity inspection and other testing areas..

Functions:

1.Menu operation and HD three color screen selection (black, blue, orange).

2.Thickness measurement of non-magnetic coating on magnetic metal substrate surface and non-metallic coating on non-magnetic metal substrate(Fe/NFe 2 in 1) .

3.Two measurement(single measurement, continuous measurement mode) and calibration modes(basic calibration and zero-point)

4.Metric/imperial unit.

5.brightness selection.

6.Voice Prompt(on/off):Instant voice broadcast measurement value,free from reading.

7.Memory storage of up to 1500 readings in 100 groups.

8. 1000mAh lithium battery direct charge by USB cable

9.Four-way screen rotation (0°,90°, 180°, 270°).

10.Chinese/English/Russian language switching.

11.High and low measurement limit setting: When the high limit or low limit is detected, the measured value will turn red and the corresponding icon will be indicated.

12.Multiple automatic shutdown time settings: 2 minutes,5 minutes,10 minutes, half an hour and never.

Specifications:

●Item Name: WT230 paint thickness tester

●Measuring principle: Magnetic induction (F-probe) and eddy current (N-probe)

●Measurement range: 0 ~ 1300um/51mil

●Minimum diameter of magnetic metal substrate:12mm

●Minimum thickness of magnetic metal substrate:0.5mm.

●Minimum radius of curvature for magnetic convex substrate:2mm

●Minimum radius of curvature for magnetic concave substrate:11mm

●Minimum diameter of non-magnetic metal substrate:50mm

●Minimum thickness of non-magnetic metal substrate:0.5mm

●Working voltage:DC 3.7V (Lithium battery capacity 1000mAh).

Packing list:

●1 * Paint thickness meter of model WT230,

●Calibration set from Aluminum and Iron plate,

●5 calibration foils ●White USB cable ●1 * English User Manual

Color-screen HD display

coating thickness meter gauge, paint tester

Reminder and Calibration Operation

Reminder: 1.This coating thickness gauge is equipped with rechargeable battery. If you can't turn on the paint meter, please use it after charging (power adapter specification: DC 5V/1A, namely ordinary mobile phone charger).This instrument is not shipped with power adapter. 2.Keep the probe away from the measured substrate when starting up.3.“-OL-”indicates that the value exceeds measurement range.4..Do not press the sensor with your finger or other object into the auto paint meter, because this operation may damage the sensor parts and the paint thickness tester.

Calibration Operation

(1).Basic calibration:

a. Prepare the calibration plate and calibration base, enter calibration menu and select basic calibration.

b. According to the instrument instruction, place the corresponding calibration plate for calibration.

c. After calibration is completed, “calibration complete” will show up at the bottom of the screen and the instrument will return to the previous interface.

d. After the calibration is complete, you can go back to measurement interface and perform measurement.

e.Magnetic and non-magnetic metal base calibration do not affect each other

(2).Zero Calibration:

a. Enter calibration menu and select zero calibration.

b. Lightly press the instrument onto substrate.

c. The instrument will automatically calibrate to zero point.

d. The instrument displays the previous interface after calibration is done.

e. After calibration is complete, you can go back to measurement interface and perform measurements.

Note: When performing basic calibration, press the instrument onto substrate when the arrow is down, and remove it when the arrow is up.

Menu Chart

dry film thickness gauge

Smart UI Design

Smart UI design,smart menu,new UI design for a more comfortable experience.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor,please click here to learn more.
...
After Sale Service:
1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy
2 The rules apply and summit for receive compensation
3 The conditions of accrual for amount insurance
3 The conditions of accrual for amount insurance
5 Damage to the parcel during international shipping, which resulted in damage to the goods in it
6 Loss of individual goods under international shipment The absence individual goods in the parcel
7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment
8 Returns Policy: Click to go to the Help Center to view the Returns Policy
...
...
Coating Thickness Gauge Meter, Paint Tester, Car Body Damage Detector with 1500 Groups Data Logging, Trend Graph and Alarm Setting
Coating Thickness Gauge Meter, Paint Tester, Car Body Damage Detector with 1500 Groups Data Logging, Trend Graph and Alarm Setting

BEST SELLERS

...

Product Description

Introduction:

This product is a color-screen portable coating thickness gauge with high definition display, which can quickly, non-destructively and accurately measure non-magnetic coating thickness on magnetic metal substrates and non-metallic coating thickness measurement on non-magnetic metal sub-strates. At the same time this auto paint thickness gauge tester can automatically identify magnetic metal substrate and non-magnetic metal substrate, and is widely used in manufacturing, metal processing industry,chemical industry, commodity inspection and other testing areas..

Functions:

1.Menu operation and HD three color screen selection (black, blue, orange).

2.Thickness measurement of non-magnetic coating on magnetic metal substrate surface and non-metallic coating on non-magnetic metal substrate(Fe/NFe 2 in 1) .

3.Two measurement(single measurement, continuous measurement mode) and calibration modes(basic calibration and zero-point)

4.Metric/imperial unit.

5.brightness selection.

6.Voice Prompt(on/off):Instant voice broadcast measurement value,free from reading.

7.Memory storage of up to 1500 readings in 100 groups.

8. 1000mAh lithium battery direct charge by USB cable

9.Four-way screen rotation (0°,90°, 180°, 270°).

10.Chinese/English/Russian language switching.

11.High and low measurement limit setting: When the high limit or low limit is detected, the measured value will turn red and the corresponding icon will be indicated.

12.Multiple automatic shutdown time settings: 2 minutes,5 minutes,10 minutes, half an hour and never.

Specifications:

●Item Name: WT230 paint thickness tester

●Measuring principle: Magnetic induction (F-probe) and eddy current (N-probe)

●Measurement range: 0 ~ 1300um/51mil

●Minimum diameter of magnetic metal substrate:12mm

●Minimum thickness of magnetic metal substrate:0.5mm.

●Minimum radius of curvature for magnetic convex substrate:2mm

●Minimum radius of curvature for magnetic concave substrate:11mm

●Minimum diameter of non-magnetic metal substrate:50mm

●Minimum thickness of non-magnetic metal substrate:0.5mm

●Working voltage:DC 3.7V (Lithium battery capacity 1000mAh).

Packing list:

●1 * Paint thickness meter of model WT230,

●Calibration set from Aluminum and Iron plate,

●5 calibration foils ●White USB cable ●1 * English User Manual

Color-screen HD display

coating thickness meter gauge, paint tester

Reminder and Calibration Operation

Reminder: 1.This coating thickness gauge is equipped with rechargeable battery. If you can't turn on the paint meter, please use it after charging (power adapter specification: DC 5V/1A, namely ordinary mobile phone charger).This instrument is not shipped with power adapter. 2.Keep the probe away from the measured substrate when starting up.3.“-OL-”indicates that the value exceeds measurement range.4..Do not press the sensor with your finger or other object into the auto paint meter, because this operation may damage the sensor parts and the paint thickness tester.

Calibration Operation

(1).Basic calibration:

a. Prepare the calibration plate and calibration base, enter calibration menu and select basic calibration.

b. According to the instrument instruction, place the corresponding calibration plate for calibration.

c. After calibration is completed, “calibration complete” will show up at the bottom of the screen and the instrument will return to the previous interface.

d. After the calibration is complete, you can go back to measurement interface and perform measurement.

e.Magnetic and non-magnetic metal base calibration do not affect each other

(2).Zero Calibration:

a. Enter calibration menu and select zero calibration.

b. Lightly press the instrument onto substrate.

c. The instrument will automatically calibrate to zero point.

d. The instrument displays the previous interface after calibration is done.

e. After calibration is complete, you can go back to measurement interface and perform measurements.

Note: When performing basic calibration, press the instrument onto substrate when the arrow is down, and remove it when the arrow is up.

Menu Chart

dry film thickness gauge

Smart UI Design

Smart UI design,smart menu,new UI design for a more comfortable experience.

Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
... ... ...
Liquid,cream or cosmetics items are quantity limited in shopping agent service
... ... ...
Chinese medicine is limited to ship by Chinese exporting goods.
...
2 Limitation for different shipping methods:
...
3 Yoybuy Product's Label:
...
Sensitive Product(SEN)
...
Product With battery
...
Cream
...
Powder
...
Dangerous Products
...
....
4 Volume weight Requested:
...
volume weight=length*height*Width/5000
...
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
...
...
...
...
...
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.
After Sale Service:
2 The rules apply and summit for receive compensation
3 The conditions of accrual for amount insurance
3 The conditions of accrual for amount insurance
5 Damage to the parcel during international shipping, which resulted in damage to the goods in it
6 Loss of individual goods under international shipment The absence individual goods in the parcel
7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment
...

BEST SELLERS

Inquire Now
X

Contact us now

Language

Currency

    Upload image to find the same item

    Drag the image here, or Click to upload Tips: Only jpg, jpeg, png, webp

    Scan the QR code and use your phone to take a direct photo search.

    ×