- 【EXCELLENT QUALITY】- This screen printing flash dryer is all made of steel structure, using the advanced classic spraying and chrome plating. The silk screen dryer is exquisite and fine in the craft.
- 【LARGE DRYING AREA】- The effective heating area of the dryer reaches 16\" x 16\" (41 x 41 cm). The heating tubes are wrapped by a stainless steel wire mesh that has higher thermal efficiency, especially more practical for large areas that need to be dried.
- 【ACCURATE THERMOSTAT & SENSOR】- Equipped with accurate temperature controller and sensitive sensor, the temperature control range is 0-100℃. When the sensor detects that the heating area has reached the set temperature, the flash dryer for screen printing will automatically stop heating in time.
- 【ADJUSTABLE HEIGHT】- By adjusting the height adjustment knob, you can adjust the corresponding height as required. And the range of adjustment is from 30\"-48\".
- 【SOLID X-SHAPED BASE】- The base of the 16x16 flash dryer adopts the X-shaped design, which saves the space area and makes the flash dryer more stable. The traditional cross design is likely to cause injuries and bumps for people, but our flash dryers overcome this shortcoming.
|
|
|
|
|---|---|---|
Extraordinary QualityThanks to using the steel structure as well as the advanced classic spraying, our flash dryers' performance is better than other products on the market. They are more reliable and stable performance. |
Large Drying AreaThe effective heating area of the dryer is 16" x 16" (41 x 41 cm), which is very practical for large areas that need to be dried. Wrapped by stainless steel wire mesh, heating tubes have higher thermal efficiency and save energy. |
Precise Thermostat & SensorThis flash dryer 16x16 equips an accurate temperature controller and sensor. You can adjust the temperature as required, 0-100℃temperature control range. If the heating area has reached the set temperature, the machine will automatically stop heating in time. |
|
|
|
|
|---|---|---|
1700W Heating Tuber1700W high-power heating pipe accelerates the speed of ink drying. The reflective aluminum plate at the rear to make the thermal efficiency higher and save energy. It uses a panel with hundreds of wires flowing through it to provide consistent heat throughout the heating area. |
Adjustable HeightOn the below support bar, there are two height adjustment knobs. The height can be adjusted up and down according to what you need, 80 cm-120 cm adjustment range. |
X-shaped BaseCompared with the traditional cross design, our flash dryer screen printing adopts the X-shaped design, which not only saves the space area but also makes the flash dryer more stable. Four wheels offer convenience for the machine to move quickly. |
Specifications
Input Power:110V/60Hz
Minimum Height:30"
Maximum Height:48"
Heating Area:16" x 16"
Top Dimensions:29" x 19"
Base Dimensions:38" x 38"
Maximum Power Usage:1700 Watts
Suggest Temp Range:0-100 degrees Celsius
Package Content
- 1 X 16" x 16" Flash Dryer with Temperature Display
16" x 16" Flash Dryer
A professionally built, excellent flash dryer. It has an 16" x 16" heating grid opening, wheels, and there is no special wiring required. Additionally, it uses a panel with hundreds of wires flowing through it to provide consistent heat throughout the heating area. Foundation is compatible with heating box, stable, saving-space, and overcoming the flaw caused by traditional "十" that quickly gets a knock and stuck.
- Excellent Quality
- Large Drying Area
- Adjustable Height
- Accurate Thermostat & Sensor
|
|
|
|
|
|---|---|---|---|---|
| 18x24 Inch flash dryer | 18x24 Inch flash dryer | 18x18 Inch flash dryer | Automatic IR Flash Dryer | |
| Style | Electronic control | Temperature control | Electronic control | Automatic |
| Power | 2000 Watts | 2000 Watts | 2000 Watts | 6000W |
| Minimum Height | 24" | 24" | 24" | —— |
| Maximum Height | 43" | 43" | 43" | —— |
| Heating Area | 18" x 24"(45 x 60 cm) | Heating Area: 18" x 24"(45 x 60 cm) | Heating Area: 18" x 18" | 20" x 24" (50 x 60 cm) |
| Adjustable height floor stand 30" to 48". | Adjustable height floor stand 30" to 48". | Adjustable height floor stand 30" to 48". | —— |
BEST SELLERS
Product Description
|
|
|
|
|---|---|---|
Extraordinary QualityThanks to using the steel structure as well as the advanced classic spraying, our flash dryers' performance is better than other products on the market. They are more reliable and stable performance. |
Large Drying AreaThe effective heating area of the dryer is 16" x 16" (41 x 41 cm), which is very practical for large areas that need to be dried. Wrapped by stainless steel wire mesh, heating tubes have higher thermal efficiency and save energy. |
Precise Thermostat & SensorThis flash dryer 16x16 equips an accurate temperature controller and sensor. You can adjust the temperature as required, 0-100℃temperature control range. If the heating area has reached the set temperature, the machine will automatically stop heating in time. |
|
|
|
|
|---|---|---|
1700W Heating Tuber1700W high-power heating pipe accelerates the speed of ink drying. The reflective aluminum plate at the rear to make the thermal efficiency higher and save energy. It uses a panel with hundreds of wires flowing through it to provide consistent heat throughout the heating area. |
Adjustable HeightOn the below support bar, there are two height adjustment knobs. The height can be adjusted up and down according to what you need, 80 cm-120 cm adjustment range. |
X-shaped BaseCompared with the traditional cross design, our flash dryer screen printing adopts the X-shaped design, which not only saves the space area but also makes the flash dryer more stable. Four wheels offer convenience for the machine to move quickly. |
Specifications
Input Power:110V/60Hz
Minimum Height:30"
Maximum Height:48"
Heating Area:16" x 16"
Top Dimensions:29" x 19"
Base Dimensions:38" x 38"
Maximum Power Usage:1700 Watts
Suggest Temp Range:0-100 degrees Celsius
Package Content
- 1 X 16" x 16" Flash Dryer with Temperature Display
16" x 16" Flash Dryer
A professionally built, excellent flash dryer. It has an 16" x 16" heating grid opening, wheels, and there is no special wiring required. Additionally, it uses a panel with hundreds of wires flowing through it to provide consistent heat throughout the heating area. Foundation is compatible with heating box, stable, saving-space, and overcoming the flaw caused by traditional "十" that quickly gets a knock and stuck.
- Excellent Quality
- Large Drying Area
- Adjustable Height
- Accurate Thermostat & Sensor
|
|
|
|
|
|
|---|---|---|---|---|
| 18x24 Inch flash dryer | 18x24 Inch flash dryer | 18x18 Inch flash dryer | Automatic IR Flash Dryer | |
| Style | Electronic control | Temperature control | Electronic control | Automatic |
| Power | 2000 Watts | 2000 Watts | 2000 Watts | 6000W |
| Minimum Height | 24" | 24" | 24" | —— |
| Maximum Height | 43" | 43" | 43" | —— |
| Heating Area | 18" x 24"(45 x 60 cm) | Heating Area: 18" x 24"(45 x 60 cm) | Heating Area: 18" x 18" | 20" x 24" (50 x 60 cm) |
| Adjustable height floor stand 30" to 48". | Adjustable height floor stand 30" to 48". | Adjustable height floor stand 30" to 48". | —— |
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
