BAOSHISHAN NO.1 Zahn Cup Viscosity Cup #1 Dip Type 44ml Stainless Steel Viscometer Flow Cup for Paint Finishes Oil

Retail Price: $ 32.0

Zahn Immersion Viscosity Cup

This is a Zahn type Cup Viscometer which are used to measure the flow behavior of liquids such as paints and is in very nice condition.Applicable to the construction site to quickly measure the viscosity of the paint to be sprayed; more widely used in electronic products, plastic coatings industry. The cup and Iwata spray gun together become essential plant construction tools.

Fast determination of fluid viscosity such as ink, paint and dye.
According to ASTM D 4212 Standards (Standard Test Method for Viscosity Cup Immersion).
Cup 1# ~ 5 # available for different materials
Mainly applied to maintain the stability of the viscosity of the product in the process of use, so that the viscosity is always maintained at the set range to protect the color of the product effect.

Zahn Cup Operation Method & Maintenance


1.Clean before Testing Choose the appropriate cup size before testing, so that the time of outflow can be controlled between 20 and 80 seconds. Wipe it clean with the appropriate solvent and dry it before using.	2. Liquid Temperature Control Adjust the temperature of the filtered sample and the outlet cup to 25℃ or a specific temperature, keep the temperature constant, and immerse the cup in the container for 1-5 minutes to achieve a thermal balance.	3. Test and Time Lift the cup vertically from the sample, and the movement needs to be fast and steady. Start the timer when the the upper end of the cup leaves the liquid level and. Keep the cup vertical when the liquid flows out and the distance from the liquid surface should not exceed 150mm.	4. Viscosity Value Conversion Stop timing when the first breakpoint occurs. Repeat the test 2-3 times. Take the average time to reduce the error and the difference between the two measurements should be less than 5% of the average. Then use the formula v=k (t-c) to convert the viscosity value. Clean the cup after testing.


NDJ-1 Rotational Viscometer	NDJ-8S Rotational Viscometer	ISO Viscosity Cup	Tu 4 Viscosity Cup	DIN Viscosity Cup	Tu 4 Viscosity Cup
Range: 1 ~ 100,000mPa	Range:1 ~ 2 x 1,000,000mPa	3#: Φ3mm; 7-42cst	Orifice: Φ4mm	Orifice: Φ4 mm	Orifice: Φ4mm
Rotor: 1#2#3#4#	Rotor: 1#2#3#4#	4#: Φ4mm; 34-135cst	Viscosity range: 112-685cst	Viscosity range: 96-683cst	Viscosity range: 112-685cst
Error: ±5%	Error: 2%	5#: Φ5mm; 91-326cst	Outflow time:≤150S	Outflow time: 20-110s	Outflow Time:30-100s
Voltage: 220V with 110V voltage transformer	Voltage: 110V	6#: Φ6mm; 188-684cst	Volume: 100ml	Volume: 100ml	Volume: 100ml
Reading: Pointer	Reading: Digital	8#: Φ8mm; 600-2000cst

Zahn Cup Application

Zahn Cup can be used to quickly determine the viscosity of printing ink, dyes, coatings, experimental solvents, leather paint, oil, grease, food and other mobile liquids in the printing industry such as paint, varnish, wet enamel, gravure, relief, lithography, flexography, silk plate, etc.

Zahn Cup is often used as a fast viscosity measuring tool in workshops and at the spot.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

BAOSHISHAN NO.1 Zahn Cup Viscosity Cup #1 Dip Type 44ml Stainless Steel Viscometer Flow Cup for Paint Finishes Oil

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Zahn Immersion Viscosity Cup

Fast determination of fluid viscosity such as ink, paint and dye.
According to ASTM D 4212 Standards (Standard Test Method for Viscosity Cup Immersion).
Cup 1# ~ 5 # available for different materials
Mainly applied to maintain the stability of the viscosity of the product in the process of use, so that the viscosity is always maintained at the set range to protect the color of the product effect.

Zahn Cup Operation Method & Maintenance


1.Clean before Testing Choose the appropriate cup size before testing, so that the time of outflow can be controlled between 20 and 80 seconds. Wipe it clean with the appropriate solvent and dry it before using.	2. Liquid Temperature Control Adjust the temperature of the filtered sample and the outlet cup to 25℃ or a specific temperature, keep the temperature constant, and immerse the cup in the container for 1-5 minutes to achieve a thermal balance.	3. Test and Time Lift the cup vertically from the sample, and the movement needs to be fast and steady. Start the timer when the the upper end of the cup leaves the liquid level and. Keep the cup vertical when the liquid flows out and the distance from the liquid surface should not exceed 150mm.	4. Viscosity Value Conversion Stop timing when the first breakpoint occurs. Repeat the test 2-3 times. Take the average time to reduce the error and the difference between the two measurements should be less than 5% of the average. Then use the formula v=k (t-c) to convert the viscosity value. Clean the cup after testing.


NDJ-1 Rotational Viscometer	NDJ-8S Rotational Viscometer	ISO Viscosity Cup	Tu 4 Viscosity Cup	DIN Viscosity Cup	Tu 4 Viscosity Cup
Range: 1 ~ 100,000mPa	Range:1 ~ 2 x 1,000,000mPa	3#: Φ3mm; 7-42cst	Orifice: Φ4mm	Orifice: Φ4 mm	Orifice: Φ4mm
Rotor: 1#2#3#4#	Rotor: 1#2#3#4#	4#: Φ4mm; 34-135cst	Viscosity range: 112-685cst	Viscosity range: 96-683cst	Viscosity range: 112-685cst
Error: ±5%	Error: 2%	5#: Φ5mm; 91-326cst	Outflow time:≤150S	Outflow time: 20-110s	Outflow Time:30-100s
Voltage: 220V with 110V voltage transformer	Voltage: 110V	6#: Φ6mm; 188-684cst	Volume: 100ml	Volume: 100ml	Volume: 100ml
Reading: Pointer	Reading: Digital	8#: Φ8mm; 600-2000cst

Zahn Cup Application

Zahn Cup is often used as a fast viscosity measuring tool in workshops and at the spot.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.