Arducam M12 Lens Kit, Low Distortion M12 Mount Lenses for Arduino and Raspberry Pi Camera
  • 5 M12 Lenses, carefully selected with minimum distortion, tested on 1/4” image sensors like OV2640 and OV5647
  • Come in 5 different FOV (Field of View), Horizontal FOV ranging from 45 to 90 degrees on a 1/4” sensor.
  • Caps labeled, screws and m12 lens holder included, specifications provided. A lifesaver for picking and changing lenses
  • 2 M12 lens holders with 18mm and 20mm hole spacing. Instructions for changing the lens: youtu.be/23jE0l8PTKA
  • NOTE: This kit shares the box with our 10-lens M12 lens kit, so it only takes half of the space, and some sockets are left empty
color:
  • 5-lens Low distortion Kit
Retail Price: $ 59.99
Wholesale Price: Inquire Now
Arducam M12 Lens Kit, Low Distortion M12 Mount Lenses for Arduino and Raspberry Pi Camera
Arducam M12 Lens Kit, Low Distortion M12 Mount Lenses for Arduino and Raspberry Pi Camera

BEST SELLERS


Product Description

5

Note:

1.Choose a suitable lens holder as follows:

a) Determine the lens holder height listed in the lens specifications for your selected lens. If you use a different lens holder height, you might not be able to focus the lens at all.

b) Ensure that the lens holder matches the screw hole pitch of your camera board. Lens holders are available with18mm and 20mm pitches.

2.If required, the thread gap between the lens and lens holder can be filled with damping grease or similar glue in order to fix the lens in position after focusing.

3.Specks of dust or tiny bubblers might be visible on the image while focusing the lens. These will disappear when the lens is in focus, and will not affect image quality.

4.When focusing or replacing a lens, do not screw the lens into the lens holder too deep, otherwise the lens might touch and damage the image sensor. Often, focusing a lens is performed while monitoring the image quality on a video screen. A blurry image will result if the lens is screwed in either too deep or too shallow from where it is in focus.

5.You have to manually remove the IR filter at the bottom of the lenses when using them with a NoIR camera

Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.
After Sale Service:
1 Insurance Policy: Learn more
2 The rules apply and summit for receive compensation
3 The conditions of accrual for amount insurance
3 The conditions of accrual for amount insurance
5 Damage to the parcel during international shipping, which resulted in damage to the goods in it
6 Loss of individual goods under international shipment The absence individual goods in the parcel
7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment
8 Returns Policy: Learn more

BEST SELLERS

Inquire Now
X

Contact us now