Zodiac Silicone Molds for Resin Charm Cabochon for Epoxy Concrete Cement Plaster Soap Bath Bomb Wax Chocolate Candy Melt 12-Cavity Diameter 1.5-2.4inch

Retail Price: $ 6.99

Wholesale Price: Inquire Now

Dimension approximate: 7.28x5x0.79inch

Make

Aquarius 2x1.86inch

Pisces 5x1.86inch

Aries 5x1.86inch

Taurus 1.82x1.97inch

Gemini 1.86x1.89inch

Cancer 2x1.97inch

Leo 5x2inch

Virgo 5x2.28inch

Libra 2.28x1.85inch

Scorpio 1.93x2.21inch

Sagittarius 1.91x2inch

Capricorn 1.92x2inch

Color: clear

Finish: gloss (may require polish/glaze if need a shiniest/most glossy look)

Suffer temperature: -40 to 230 centigrade/ -40 to 446 fahrenheit

Dishwasher/oven/refrigerator safe

Food grade, no BPA/PVC/phthalate

Wash and boil before use, especially for food.

More Tips to use with Epoxy Resin:

1) poured in silicone molds in layers, allowing air bubbles completely escape;

2) to expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mold, filled with resin in the oven.

3) follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard.

4) do not use water-base ink for resin casting.

5) After baking clay / resin in complex or deep molds release the finished product under running water with soap.

6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release.


	Ridged Edge Agate Coaster Mold 4-cavity	Agate Coaster Mold 5-cavity	Geode Agate Jewelry Molds 3-count	XL Coaster Molds Set	Geometric Shapes Molds with Supplies 26-count	Cluster Molds 4-count
You may also Like!	Combine 4 Parts to Make a Large Coaster	Make Irregular Agate Coaster	Make Druzy Center Agate Slice	LOT! 13 Coaster Molds with Supplies	DIY Pyramid, Cone, Crystal Diamond, Cube, Orb	Cluster Molds Set


	Resin Casting Set 146 Supplies	Geode Planchette Mold	Pendant Jewelry Making Molds Set 45-kit	Drusy Agate Cabochon Molds 4-count	Disc Coaster Molds 4-count	Sphere Resin Silicone Molds 6-count
You may also like	Heat Gun & Jewelry Making Tools Set	Druzy Hollow-out Agate Coaster	Make Varied of Necklace Pendant, Earrings, Charms	Geode Gemstone Jewelry Making	Round Coaster Molds 4-count	Round Orb Assortment

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Zodiac Silicone Molds for Resin Charm Cabochon for Epoxy Concrete Cement Plaster Soap Bath Bomb Wax Chocolate Candy Melt 12-Cavity Diameter 1.5-2.4inch

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Dimension approximate: 7.28x5x0.79inch

Make

Aquarius 2x1.86inch

Pisces 5x1.86inch

Aries 5x1.86inch

Taurus 1.82x1.97inch

Gemini 1.86x1.89inch

Cancer 2x1.97inch

Leo 5x2inch

Virgo 5x2.28inch

Libra 2.28x1.85inch

Scorpio 1.93x2.21inch

Sagittarius 1.91x2inch

Capricorn 1.92x2inch

Color: clear

Finish: gloss (may require polish/glaze if need a shiniest/most glossy look)

Suffer temperature: -40 to 230 centigrade/ -40 to 446 fahrenheit

Dishwasher/oven/refrigerator safe

Food grade, no BPA/PVC/phthalate

Wash and boil before use, especially for food.

More Tips to use with Epoxy Resin:

1) poured in silicone molds in layers, allowing air bubbles completely escape;

3) follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard.

4) do not use water-base ink for resin casting.

5) After baking clay / resin in complex or deep molds release the finished product under running water with soap.

6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release.


	Ridged Edge Agate Coaster Mold 4-cavity	Agate Coaster Mold 5-cavity	Geode Agate Jewelry Molds 3-count	XL Coaster Molds Set	Geometric Shapes Molds with Supplies 26-count	Cluster Molds 4-count
You may also Like!	Combine 4 Parts to Make a Large Coaster	Make Irregular Agate Coaster	Make Druzy Center Agate Slice	LOT! 13 Coaster Molds with Supplies	DIY Pyramid, Cone, Crystal Diamond, Cube, Orb	Cluster Molds Set


	Resin Casting Set 146 Supplies	Geode Planchette Mold	Pendant Jewelry Making Molds Set 45-kit	Drusy Agate Cabochon Molds 4-count	Disc Coaster Molds 4-count	Sphere Resin Silicone Molds 6-count
You may also like	Heat Gun & Jewelry Making Tools Set	Druzy Hollow-out Agate Coaster	Make Varied of Necklace Pendant, Earrings, Charms	Geode Gemstone Jewelry Making	Round Coaster Molds 4-count	Round Orb Assortment

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.