Create a tight, secure fit even in wide spaces
Extra Long
These replacement spindle rods measure 12cm (4.7 inches) in length, which may be significantly longer than the set that came standard with your gate. As a result, you may be able to achieve a more sturdy and reliable fit for your gate in more places.
- Rubbery padded end helps grip the walls without causing damage
- Matching adjustment wheel allows for an adjustable length and tight, secure fit
Spindle Rods Replacement Set
For Baby and Pet Safety Gates
This 4 pack of spindle rods from Baby Gate Guru is designed as a replacement kit for lost or damaged spindle rods (the threaded bolts that push against the wall to hold the gate in place), commonly used in pressure mounted baby and pet safety gates.
Available in 2 standard sizes, M8 or M10, to fit your model of safety gate. M8 fits gates with a 7-8mm diameter opening. M10 fits gates with a 9-10mm diameter opening. See below for compatibility information.
- M10 bolt diameter
- 12cm (4.7 inches) long
- Works with pressure mounted gates
Check Your Compatibility
Brands Compatible with M10 (10mm) Spindle Rods
- Dreambaby
- Munchkin
- North States (Supergate)
- Bindaboo
- Safety 1st
- Lindam
- Baby Dan
Don't See Your Brand?
If you have any of the following brands you will want to change to the M8 (8mm) size instead: Regalo, Summer Infant, Carlson, Top Paw, Evenflo.
Brands listed here are not affiliated with this product and are listed solely for compatibility purposes.
Finding The Right Parts For Your Gate
Is Your Gate Pressure Mounted?
These spindle rods are designed to be used with pressure mounted gates only. Pressure mounted gates are installed by tightening the spindle rods against the surrounding wall or doorframe, creating tension that holds the gate securely in place. By contrast, hardware mounted gates are installed by screwing manufacturer-provided hardware into the walls, then connecting the gate.
Measuring Your Gate
If you are not sure which size will fit your pressure mounted gate, you can measure the holes that the spindle rods go into to determine the correct size yourself. An M8 screw's true diameter will measure slightly less than 8mm, so will fit nicely into a 7-8mm hole. An M10 screw's true diameter will measure slightly less than 10mm, and will fit nicely into a 9-10mm hole.
Use In Combination With Wall Protectors For Even More Length and Padding
Baby Gate Guru Spindle Rods are designed to fit perfectly with Baby Gate Guru Wall Protectors (sold separately).
Baby Gate Guru Wall Protectors can add an additional 1.25" (5/8" extra each side) in length to your installation, extending the maximum width of your gate even further to help it fit in wider openings.
Wall Protectors are designed to spread out the pressure against your wall over a larger padded surface area, protecting your walls even more from scuffs, paint scrapes, dents, and other damage.
Use In Combination With Y-Spindle Rods For Setup At The Bottom Of Staircases
Extra Long Baby Gate Guru Spindle Rods can help your gate installation reach new places, and when used in combination with Baby Gate Guru Banister Y-Spindle Rods (sold separately) you can even install your gate at the bottom of stairs!
Use 2-3 extra long spindle rods plus 1-2 extra long banister Y-spindle rods, depending on the design of your staircase, and your pressure gate can install securely against your stair banister.
Note that pressure mounted safety gates should never be installed at the top of staircases. Only hardware mounted gates are suitable there.
|
|
|
|
|
|
|---|---|---|---|---|---|
| M8 Extra Long Spindle Rods (8mm) | M10 Extra Long Spindle Rods (10mm) | M8 Extra Long Banister Y-Spindle Rods (8mm) | M10 Extra Long Banister Y-Spindle Rods (10mm) | Pressure Gate Wall Protectors | |
| Colors Available | White, Bronze, Black | White, Bronze, Black | White, Bronze, Black | White, Bronze, Black | White, Bronze, Black |
| Used With | Walls, Doorways, Flat Surfaces | Walls, Doorways, Flat Surfaces | Staircases, Banisters, Angled Wall Corners | Staircases, Banisters, Angled Wall Corners | Walls, Doorways, Flat Surfaces |
| Regalo compatible | ✓ | ✓ | ✓ | ||
| Summer Infant compatible | ✓ | ✓ | ✓ | ||
| Carlson compatible | ✓ | ✓ | ✓ | ||
| Dreambaby compatible | ✓ | ✓ | ✓ | ||
| Munchkin compatible | ✓ | ✓ | ✓ | ||
| North States (Supergate) compatible | ✓ | ✓ | ✓ |
BEST SELLERS
Product Description
Create a tight, secure fit even in wide spaces
Extra Long
These replacement spindle rods measure 12cm (4.7 inches) in length, which may be significantly longer than the set that came standard with your gate. As a result, you may be able to achieve a more sturdy and reliable fit for your gate in more places.
- Rubbery padded end helps grip the walls without causing damage
- Matching adjustment wheel allows for an adjustable length and tight, secure fit
Spindle Rods Replacement Set
For Baby and Pet Safety Gates
This 4 pack of spindle rods from Baby Gate Guru is designed as a replacement kit for lost or damaged spindle rods (the threaded bolts that push against the wall to hold the gate in place), commonly used in pressure mounted baby and pet safety gates.
Available in 2 standard sizes, M8 or M10, to fit your model of safety gate. M8 fits gates with a 7-8mm diameter opening. M10 fits gates with a 9-10mm diameter opening. See below for compatibility information.
- M10 bolt diameter
- 12cm (4.7 inches) long
- Works with pressure mounted gates
Check Your Compatibility
Brands Compatible with M10 (10mm) Spindle Rods
- Dreambaby
- Munchkin
- North States (Supergate)
- Bindaboo
- Safety 1st
- Lindam
- Baby Dan
Don't See Your Brand?
If you have any of the following brands you will want to change to the M8 (8mm) size instead: Regalo, Summer Infant, Carlson, Top Paw, Evenflo.
Brands listed here are not affiliated with this product and are listed solely for compatibility purposes.
Finding The Right Parts For Your Gate
Is Your Gate Pressure Mounted?
These spindle rods are designed to be used with pressure mounted gates only. Pressure mounted gates are installed by tightening the spindle rods against the surrounding wall or doorframe, creating tension that holds the gate securely in place. By contrast, hardware mounted gates are installed by screwing manufacturer-provided hardware into the walls, then connecting the gate.
Measuring Your Gate
If you are not sure which size will fit your pressure mounted gate, you can measure the holes that the spindle rods go into to determine the correct size yourself. An M8 screw's true diameter will measure slightly less than 8mm, so will fit nicely into a 7-8mm hole. An M10 screw's true diameter will measure slightly less than 10mm, and will fit nicely into a 9-10mm hole.
Use In Combination With Wall Protectors For Even More Length and Padding
Baby Gate Guru Spindle Rods are designed to fit perfectly with Baby Gate Guru Wall Protectors (sold separately).
Baby Gate Guru Wall Protectors can add an additional 1.25" (5/8" extra each side) in length to your installation, extending the maximum width of your gate even further to help it fit in wider openings.
Wall Protectors are designed to spread out the pressure against your wall over a larger padded surface area, protecting your walls even more from scuffs, paint scrapes, dents, and other damage.
Use In Combination With Y-Spindle Rods For Setup At The Bottom Of Staircases
Extra Long Baby Gate Guru Spindle Rods can help your gate installation reach new places, and when used in combination with Baby Gate Guru Banister Y-Spindle Rods (sold separately) you can even install your gate at the bottom of stairs!
Use 2-3 extra long spindle rods plus 1-2 extra long banister Y-spindle rods, depending on the design of your staircase, and your pressure gate can install securely against your stair banister.
Note that pressure mounted safety gates should never be installed at the top of staircases. Only hardware mounted gates are suitable there.
|
|
|
|
|
|
|
|---|---|---|---|---|---|
| M8 Extra Long Spindle Rods (8mm) | M10 Extra Long Spindle Rods (10mm) | M8 Extra Long Banister Y-Spindle Rods (8mm) | M10 Extra Long Banister Y-Spindle Rods (10mm) | Pressure Gate Wall Protectors | |
| Colors Available | White, Bronze, Black | White, Bronze, Black | White, Bronze, Black | White, Bronze, Black | White, Bronze, Black |
| Used With | Walls, Doorways, Flat Surfaces | Walls, Doorways, Flat Surfaces | Staircases, Banisters, Angled Wall Corners | Staircases, Banisters, Angled Wall Corners | Walls, Doorways, Flat Surfaces |
| Regalo compatible | ✓ | ✓ | ✓ | ||
| Summer Infant compatible | ✓ | ✓ | ✓ | ||
| Carlson compatible | ✓ | ✓ | ✓ | ||
| Dreambaby compatible | ✓ | ✓ | ✓ | ||
| Munchkin compatible | ✓ | ✓ | ✓ | ||
| North States (Supergate) compatible | ✓ | ✓ | ✓ |
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
