This Link-Belt F-U300 series heavy-duty ball bearing flange unit has a cast iron housing with four bolt holes, clearance seal, and spring-locking collar. This non-expansion type bearing unit is designed for mounting onto bearing surfaces perpendicular to the shaft axis. This ready-to-mount flange unit has a one-piece housing made of cast iron for rigidity and vibration damping. It has a powder coating for corrosion resistance, a grease fitting on the outer surface for reapplying lubricant, and a machined mounting surface for increased stability. The double-sealed, deep-groove ball bearing insert in the housing is made of chromium steel and is rated "heavy duty" for applications with high radial loads and moderate thrust or combination loads. Its wide inner ring provides increased shaft support and reduced inner-ring tilt for smooth operation. The convex sphered outer surface compensates for misalignments, and a rivet on the outside ring prevents rotation of the ring in the housing, reducing heat buildup and prolonging the bearing life. Molded rubber clearance seals with external seal guards and snap rings on both sides of the bearing retain lubricant applied at manufacture and help protect against contaminants. The bearing locks onto the shaft with a spring-locking collar and two setscrews for a positive lock on the shaft. This lock type minimizes ring distortion and vibration and is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. Flanged bearing units are suitable for use in industrial and commercial applications including conveyors, fans and blowers, construction machinery, and processing equipment, among many others.
Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.
Rexnord manufactures power transmission components under brands such as Link-Belt, Thomas, and Stearns, and water management products under brands such as VAG and Zurn. The company is headquartered in Milwaukee, WI.
Drag the image here, or Click to upload Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×