Feature

• Item Name: 120VAC 35 Watt inground LED Pool Ligts Kit
• Model No. PL-M120 & CPL-120/RPL120 (1 piece LED Pool Bulb with remote Control Kit
• Socket : E26/E27
• Dimension: diameter 6 3/4" (170mm) height 5 1/2.4" (140mm)
• Color: Any Solid color 5 Color show
• Control Solution: . On and Off Power Switch / CPL-120 Control Panel / RPL-120 Remote Control
• Compatible inground spa light fixture: Hayward Astroite TMSP058 Series, Jacuzzi Full Moon, Pentair Amerilite 784 Series, and Sta-Rite SwimQuip Series 0508. All R-40 incandescent Bulb replacement
• Compatible Control System : LAMPAOUS CPL-120/RPL-120 (not compatible with LAMPAOUS intekit control system (C2-120)
• Synchronization: Easy to synchronize with multi PL-M120 and SPL-M120 pool and Spa Lights. Can't synchronize with other brand bulb or LAMPAOUS intekit S2 serial bulbs.
• Color or color show program recall design

Attention:

• Before you purchase the bulb please check the Input Voltage(120VAC not 12VAC), Fixture type and Dimension, LAMP Base/Socket (E26 not E11)
• Please use a new gasket and install by professional person to avoid waterleakage. Water leakage may cause bulb flicker, damage etc

Color show and Color

Color show

• Mellow Wave, a two minute color sequence of the seven solid colors holding for eight seconds on each before blending to the next.
• Rapid Wave, a fast change between seven solid colors in half second intervals.
• Long Wave, a very slow cross-fade seven solid colors sequence holding for ten minutes before blending to the next
• Anthem Wave, a red white and blue themed blend that lasts three seconds before blending to the next
• Ocean Wave, simulating the transitional colors of the oceans waters from green to blue

Color

• 7 Solid color can be locked from the rapid wave: Garden Green / Cool White / Sunset Orange / Blooming Violet / Island Blue / Miami Red / Deep Ocean Blue A
• ny color can be locked from mellow Wave/ Long Wave when the color fade change.

1. Control the SPL-M120/PL-M120 by power Switch: Connect all bulbs to the same power switch

• Synch multi bulbs: Turn off the power switch and turn on it again within 4-6 seconds
• Rotate the color shows: turn off the power switch and turn on it again in 2 seconds, each operation one color show will be rotated
• Lock/Unlock solid color from color show: When your favorite color displaying, turn off the power, and turn on it within 1 seconds, the color will be locked. If you do not like the color ,turn off and turn on it within 1 seconds agian to cancel or unlock the solid color.
• Color program recall. To keep your favorite color program (solid color or color show), turn off the power and turn on it after 8 seconds, the last color program will recall

2. Control the SPL-M120/ PL-M120 by Control Panel (CPL-120)

• On /OFF Switch for lock or unlock the solid color from color show, the timing and operation method is the same as the power switch
• Synch Switch to synch multi bulbsC
• olor show Switch to rotate the color show

3. Control the SPL-M120/PL-M120 by Remote Control (RPL-120), the CPL-120 and RPL-120 must used together,

• On /Off Switch for turn on and turn off the bulb (Key A)
• Synch Switch for synch multi bulbs (KeyB)
• Color Switch for lock or unlock the solid color from color show (Key C)
• Color Show Switch is for rotate 5 color shows (Key D)

Diagram

Tips:

• This system do not compatible with LAMPAOUS intekit S2 serial bulb
• This system compatible with 120VAC LAMPAOUS P serial pool & spa bulbs (Model No PL-M120, SPL-M120)
• This system compatible with 12VAC LAMPAOUS P serial pool & spa bulbs (Model No PL-M12, SPL-M12)
• Please do not connect 12VAC and 120VAC P Serial bulbs to the same control system
• The Maxiumum load for this control system is 2000W
• If you need more than 1 pool bulbs please purchase extra pool bulb (ASIN B06ZYWR9ZC ), 120VAC Spa bulb (ASIN B06ZYXJZTG). 12VAC Pool Bulb (ASIN B071H9KRH6) 12VAC Spa bulb(ASIN:B071W4ZVM8)