How to use lettering film and operation tutorial:
1. Design the desired text or pattern, and use CDR or AI software to mirror output to the cutting plotter or laser machine. (The pressure of the cutting plotter needs to be adjusted)
2. Cutting (Note: the glossy side is below)
3. Cut out the engraved text or pattern, tear off the unused waste, and keep the necessary part.
4. Place it on the material to be printed (The heat transfer Durer surface is the cutting surface, and the glossy surface is the protective film.)
5. Either hot or cold tear, tear off the transparent layer. (Recommended warm tear)
6. Finish hot stamping.