Device ready

First step：

install a rain-proof cover where you need to install the doorbell .

（expansion screws need to be used on cement and stone walls；

wood screws or 3M glue can be used on wooden walls.）

second

step1：install the doorbell body into the rain-proofcover.

2.Download APP

Tips one：Scan QR code to download;

Tips two：Search“ICSee”in mobile store and download；

Device network configuration

User mode

The way to

register a user：after the user registered an account，

the device information added by the user willalways be

association with the account number，not restricted

by the mobile phone.

01.User login

·Open“ICSee”,

select “sign up”，then log in（Figure 1

Device preparation

After the doorbell is install，short-press

the bell button to wake the doorbell.（Figure 2）

Notes：

There is voice instruction throughout the process of device

configuration. After hearing the voice prompt“wait to be

configured”，you can start configuring the device

Add device

After login successfully，click“Add My

Camera”（Figure 3）,input“WiFi password”（Figure 4）.

Finish the network configuration of the camera according to the APP operation hint.

Access device

After successful addition，the mobile phone

can access the device through the APP. The device has the

following status：

Remote view

When you first click on the

device option，it is to wake the doorbell；and click again

to enter the doorbell viewing interface.

Bell Device Configuration

If you buy a Bell Device ,you can

associate the Bell Cevice with the Video Doorbell，and the

bell device will also ring when you press the bell button.

First step：Long-press the volume button of the Bell Device

until the indicator of the bell is no longer flashing.

Second

step:Short-press the bell button of the Video Doorbell；if

the bell is ringing at the same time，the configuration is

successful.

Two Ways to Install

Method 1:

Installed to the wall by the

provided screws. It can cover the existing doorbell place

Method 2:

Installed by 3M industrial adhesive. In this way,

you don't need to drill the holes on the wall. Remember

to clean up and dry the surfaceinstall easily: with

lower-consumption technology and battery power

supply, it will be very easy to install without wiring.

This is the reset button and the charging port.