Backup Camera for Trucks, Two Installation Methods, No Interference, No Delay, 7" Wide Screen and Night Vision IP68 Waterproof Backup Camera for Box Truck, Bus, Caravan, Camper Van, Boat, Yacht
VECLESUS 7-inch Wired Backup Camera Kit Highlights:
66ft High-quality Extension Cord - More stable and reliable than wireless transmission, free from external signal interference.
Fully Waterproof Connector Design - Extension cord and power cord Connector are 4PIN IP68 waterproof design.
Multi-function and Multi-channel Signal Input - Equipped with independent green reversing trigger line, three channels of audio and video input.
Built-in Microphone Of The Camera - You can get the video sound while driving or parking.
The centralized power cord is powered by the power supply on the fuse box in cab, eliminating the tedious steps of disassembling and installing the tail lamp.
Best fit for heavy-duty vehicles: RV, Motorhome, Large truck, Tractors, school bus, box truck, flatbed truck, etc.
Product Information:
Panel Size: 7" TFT LCD digital panel
Camera Sensor: 1/3" Sharp color CCD
Resolution: 800*RGB*480
Brightness: 300cd/㎡
Screen Mode: 16:9
Video System: NTSC / PAL auto detection
Built-in speaker, removable wide sunshade
Horizontal Viewing Angle: 100°
Diagonal Viewing Angle: 120°
Camera Waterproof Rating: IP68
Power Supply: DC 9~36V
Overall Dimensions: 5.31"(H) x 8.27"(L) x 2.95"(D)
OSD menu, Remote Control
Audio/video Input: CH1, CH2, 1 Audio & Video input
The length of power cord on the monitor and camera is shown in the figure below:
IP68 Waterproof
Camera with over 12 hours immersion test.
High quality waterproof treatments connector.
Works perfectly in snow, sleet or rain.
Superior IR Night Vision
Built-in high sensitive infrared night vision chip enhances night vision effect.
18 infrared night vision led lights.
Automatically turn on infrared night vision at night.
Note: The LED light from the infrared camera won't be light up in night vision.
Multiple Mounting Methods
Up to three mounting brackets.
Upgraded suction cup holder for a stronger suction on thewindshield.
During installation, please refer to the wiring diagram above and the user manual in the package.
We also offer video installation on YouTube, where you can search VECLESUS to find it.
Some common tools used in the installation process are:Small flat-tip screwdriver, Phillips screwdriver, black electrical tape, masking tape, pliers, multimeter, pencil/ marker, electric drill.
Note:
Although this product is a one-to-one backup camera kit, the power cord is still equipped with two signal input 4-PIN connectors. If you need to use two cameras, please purchase our extension cord and the corresponding camera CV2.
In addition, generally, the spare AV input port can also be used as channel CH3 by connecting the AV-in cord.
This kit is powered by the power supply at fuse box in your vehicle cab, please find out the continuous power supply and reversing power supply with the test pencil or multimeter, then connect the red wire of the power cord to it and the black wire to the GND or iron part, green wire to reversing power supply
If you need the system for reversing only, please connect the camera to the CH2 and connect the green reversing wire to the reversing circuit.
If you need the system continuous on when driving or parking, connecting the camera to CH1 and ignore the green reversing wire!
FAQ:
Will I be able to install this camera system myself?
Many people do have the handiness to install our systems without having to hire assistance. Otherwise we recommend professional installation as they can let the system is installed correctly.
How do the system receives power?
This system can be worked in 9-36V, it receives power straight from the vehicle's fuse box.
Backup Camera for Trucks, Two Installation Methods, No Interference, No Delay, 7" Wide Screen and Night Vision IP68 Waterproof Backup Camera for Box Truck, Bus, Caravan, Camper Van, Boat, Yacht
Backup Camera for Trucks, Two Installation Methods, No Interference, No Delay, 7" Wide Screen and Night Vision IP68 Waterproof Backup Camera for Box Truck, Bus, Caravan, Camper Van, Boat, Yacht
VECLESUS 7-inch Wired Backup Camera Kit Highlights:
66ft High-quality Extension Cord - More stable and reliable than wireless transmission, free from external signal interference.
Fully Waterproof Connector Design - Extension cord and power cord Connector are 4PIN IP68 waterproof design.
Multi-function and Multi-channel Signal Input - Equipped with independent green reversing trigger line, three channels of audio and video input.
Built-in Microphone Of The Camera - You can get the video sound while driving or parking.
The centralized power cord is powered by the power supply on the fuse box in cab, eliminating the tedious steps of disassembling and installing the tail lamp.
Best fit for heavy-duty vehicles: RV, Motorhome, Large truck, Tractors, school bus, box truck, flatbed truck, etc.
Product Information:
Panel Size: 7" TFT LCD digital panel
Camera Sensor: 1/3" Sharp color CCD
Resolution: 800*RGB*480
Brightness: 300cd/㎡
Screen Mode: 16:9
Video System: NTSC / PAL auto detection
Built-in speaker, removable wide sunshade
Horizontal Viewing Angle: 100°
Diagonal Viewing Angle: 120°
Camera Waterproof Rating: IP68
Power Supply: DC 9~36V
Overall Dimensions: 5.31"(H) x 8.27"(L) x 2.95"(D)
OSD menu, Remote Control
Audio/video Input: CH1, CH2, 1 Audio & Video input
The length of power cord on the monitor and camera is shown in the figure below:
IP68 Waterproof
Camera with over 12 hours immersion test.
High quality waterproof treatments connector.
Works perfectly in snow, sleet or rain.
Superior IR Night Vision
Built-in high sensitive infrared night vision chip enhances night vision effect.
18 infrared night vision led lights.
Automatically turn on infrared night vision at night.
Note: The LED light from the infrared camera won't be light up in night vision.
Multiple Mounting Methods
Up to three mounting brackets.
Upgraded suction cup holder for a stronger suction on thewindshield.
During installation, please refer to the wiring diagram above and the user manual in the package.
We also offer video installation on YouTube, where you can search VECLESUS to find it.
Some common tools used in the installation process are:Small flat-tip screwdriver, Phillips screwdriver, black electrical tape, masking tape, pliers, multimeter, pencil/ marker, electric drill.
Note:
Although this product is a one-to-one backup camera kit, the power cord is still equipped with two signal input 4-PIN connectors. If you need to use two cameras, please purchase our extension cord and the corresponding camera CV2.
In addition, generally, the spare AV input port can also be used as channel CH3 by connecting the AV-in cord.
This kit is powered by the power supply at fuse box in your vehicle cab, please find out the continuous power supply and reversing power supply with the test pencil or multimeter, then connect the red wire of the power cord to it and the black wire to the GND or iron part, green wire to reversing power supply
If you need the system for reversing only, please connect the camera to the CH2 and connect the green reversing wire to the reversing circuit.
If you need the system continuous on when driving or parking, connecting the camera to CH1 and ignore the green reversing wire!
FAQ:
Will I be able to install this camera system myself?
Many people do have the handiness to install our systems without having to hire assistance. Otherwise we recommend professional installation as they can let the system is installed correctly.
How do the system receives power?
This system can be worked in 9-36V, it receives power straight from the vehicle's fuse box.
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.