Cen-Tec Systems 92938 Central Vacuum CT20DXQD Kit with 35' DC Hose

Compatible with all major brands of central vacuums with these inlets including beam, Electrolux, eureka, nutone, vacumaid, vacuflo, husky, canavac, cyclovac, md and imperium

Package includes a power nozzle, integrated electric telescopic wand, and 35 foot total control electric hose allowing you to control both the vacuum and the power nozzle from the hose handle

The 35 foot hose has a direct connect end combining the high voltage pin jack in conjunction with the low voltage contacts permitting control of both the vacuum unit and the electric power nozzle

The quiet drive poly-v drive system reduces vibration and noise while providing consistent power from the motor to the carpet agitator. Premium American made dusting tool, upholstery tool, and crevice tool can be caddied on the wand using the provided tool clip letting you take them along for faster cleaning

14 inches wider power nozzle

style:

Direct Connect Hose

Retail Price: $ 356.39

Wholesale Price: Inquire Now


Hose Handle Dimensions The integrated flush wand connects to hose handles with a 3.3 inch nozzle. From the handle base to the locking button should be 2 inches, leave 1.3 inches from the locking button to the end of the metal nozzle.	Flush Connection The word "Flush" refers to the electrical connection to the handle. A two pronged outlet should be 'flush' with the handle, not recessed.	Connected Wand When the wand is fully connected it should fit snugly over the nozzle of the handle. It is recommended to give a firm tug, attempting to pull them apart to ensure that the connection is secure.


Cylindrical Wand The integrated wand is a cylinder and will only work with hose handles and vacuum nozzles that have cylindrical connections.	PT (Pig Tail) Valve For PT valves the hose should have a cord that will need to be plugged into a standard wall outlet. An electrical connection to the central vacuum is obtained by plugging in the hose end where the metal band touches both prongs located at the top inside of the inlet valve.	DC (Direct Connect) Valve For DC valves the hose end plugs directly into the inlet valve at the bottom to power the vacuum nozzle. An electrical connection to the central vacuum is obtained by plugging in the hose end where the metal band touches both prongs located at the top inside of the inlet valve.	DC Plug in In the case of DC inlet valves, the direction the hose end is turned is important. Be sure to line up the electrical prongs to the outlet on the bottom to ensure an electrical current is established to your vacuum.

Cen-Tec Systems is a family owned business of 30 years specializing in the manufacturing and distribution of domestic and commercial vacuum accessories and related specialty vacuum systems.

Cen-Tec Systems focuses on delivering complete solutions to challenging applications solved with innovative products, extensive options, and superior customer support. With over 100 years of combined experience Cen-Tec Systems can provide technical assistance as necessary to achieve our customers' objectives.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Cen-Tec Systems 92938 Central Vacuum CT20DXQD Kit with 35' DC Hose

BEST SELLERS

Product introduction

Shipping Notices

The 92938 central vacuum accessory package is designed to provide superior cleaning for today's home with a mix of both carpeted and hard floor surfaces. The power nozzle is designed to provide the three features most sought in cleaning. Excellent deep down dirt recovery, excellent Grooming of the carpeted surface, and superior edge cleaning. The life-time reinforced poly-V belt will provide years of reliable service without the need to routinely Replace the Drive belt. The 35 foot total control hose is the longest permitted by UL/CSA standard so you are sure to reach all areas of your home. Customers most often request a hose Sock to protect the investment in their home and furnishings. We have recognized this by pre-installing a premium Sock treated with an anti-microbial to protect you and your home environment. The direct connect end makes the system compatible with all major brands of industry standard high volt and low volt electrified inlet valves. By connecting to all major brands of electrified inlets the 92938 is compatible with all major brands of central vacuums with these inlets including beam, ELECTROLUX, eureka, Nutone, VacuMaid, Vacuflo, husky, Canavac, Cyclovac, Md and imperium brands. A 35 foot crush proof total control hose lets you turn your central vacuum on and off from the hose handle independent of the power nozzle ideal for cleaning hard floor surfaces. The three position switch also allows you to also control power to electric nozzle and the vacuum when cleaning carpeted surfaces. A soft anti-microbial treated cotton-lycra blend hose Sock is installed on the hose to protect for surfaces, furnishings, and walls from the corrugation of the hose. The hose has a direct connect end combining the high voltage pin jack in conjunction with the low voltage contacts permitting control of both the vacuum unit and the electric power nozzle. The 14 inch wide power nozzle has a chevron agitator design shown to provide superior cleaning performance.

From the manufacturer


Hose Handle Dimensions The integrated flush wand connects to hose handles with a 3.3 inch nozzle. From the handle base to the locking button should be 2 inches, leave 1.3 inches from the locking button to the end of the metal nozzle.	Flush Connection The word "Flush" refers to the electrical connection to the handle. A two pronged outlet should be 'flush' with the handle, not recessed.	Connected Wand When the wand is fully connected it should fit snugly over the nozzle of the handle. It is recommended to give a firm tug, attempting to pull them apart to ensure that the connection is secure.


Cylindrical Wand The integrated wand is a cylinder and will only work with hose handles and vacuum nozzles that have cylindrical connections.	PT (Pig Tail) Valve For PT valves the hose should have a cord that will need to be plugged into a standard wall outlet. An electrical connection to the central vacuum is obtained by plugging in the hose end where the metal band touches both prongs located at the top inside of the inlet valve.	DC (Direct Connect) Valve For DC valves the hose end plugs directly into the inlet valve at the bottom to power the vacuum nozzle. An electrical connection to the central vacuum is obtained by plugging in the hose end where the metal band touches both prongs located at the top inside of the inlet valve.	DC Plug in In the case of DC inlet valves, the direction the hose end is turned is important. Be sure to line up the electrical prongs to the outlet on the bottom to ensure an electrical current is established to your vacuum.

Cen-Tec Systems is a family owned business of 30 years specializing in the manufacturing and distribution of domestic and commercial vacuum accessories and related specialty vacuum systems.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.