- 【SUPERIOR VINYL AND INK】 Made from 3M Vinyl and Printed with Premium HP Eco Solvent Inks. The best material and ink in the industry. Durable & Waterproof. Last the Life of hover scooter.
- 【FIT MODEL】 Work with many industry leading drifting board brands: Just fit for Swagtron T1
- 【DIY - Do It Yourself】 This decal skin fits majority Hover Board nicely. However, as newer models arrive, it requires some measurement and paper cutting to fit lights, ports, and logos better. This is a simply DIY project. However, if you make a mistake at the first try, please contact us. We will be happy to send you extra one.
- 【COMPLETE PROTECTION】 Keep your hover motorized longboard new and shinny. Covers your self-balance scooters from dings and scratches on left and right, top and bottom!
- 【EASY INSTALL】 Quick and easy to install. No bubbles and wrinkles. Check our instruction videos on YouTube to see how easy it is. Easy to remove. No sticky residuals guaranteed.
- 【UNIVERSAL】 Work with many industry leading drifting board brands: Swagway X1, HoverTech, Leray, Powerboard, Sogo, IO HAWK, DEKOTA, Street Saw, Hover X, MONOROVER R2, Zippyboard Cruiser, OU-BAND, EROVER, Hover Board , Powerboard, Xnow, Lookatool, FITURBO F1, FINCO, Razor HoverPowerboard, KOOWHEEL and many others. It can fit for the front of the boards brands Coolreall and Wallygadgets, but it may not apply for their obverse. Please see description for a list of incompatible models.
Sticker for Two Wheel Balancing Scooters Protective Cover Decal
Just fit for Swagtron T1
Self-Balancing Scooter Skin hover board sticker give your Self Balance Motorized Board a stylish look and protect it from abuse. It creates a new look to your an electric skateboard and sets you apart from the crowd.
GameXcel vinyl wrappers also provide basic scratch protection to keep your bluetooth hover long eletric boards in prime condition at all times. This Self Balancing Board Skins feature ultra-high gloss inks and then covered with a clear protective layer for ultimate durability by 3M. All GameXcel use a patented repositionable and removable adhesive for fast and easy installation and goo-free removal.
This skin fits following models well:
vinyl decal sticker fit major industry electronic scooter, electric skateboard, or many two-wheel boards. It can fit for the front of the boards brands Coolreall and Wallygadgets, it apply for Swagtron T1 and may not apply for others .
Installation Instruction:
install:
1) Clean the unit's surface as thoroughly as possible.Use rubbing alcohol on a lint-free cloth to remove any grease or other contaminates. Most issues of non-sticking are due to some type of oil or grease.
2) Peel one piece of Decals from the paper liner. NOT to let the adhesive side touch anything.
3) Determine the placement, apply the Skin to the surface using your fingers or the side of your thumb, starting from one corner and working your way across the surface.
4) If a piece is not going on straight, you can gently lift it back up. Do not stretch it from its original size.
5) If installed slowly and carefully, there should be NO air bubbles left under the sticker. Any air that may become trapped during installation will go away in time.
6) During the cold weather or for a better result, apply hot air to the decal surface by using a hair dryer or hot air gun to activate chemical agent while putting the sticker. Especially heat up the edge surface. Allow at least 3 hours for cool down before touching the decal sticker skin.
Fit Swagtron T1 Skin
DIY - Do It Yourself
This decal skin fits majority hover board nicely. However, as newer models arrive, it requires some measurement and paper cutting to fit lights, ports, and logos better.
A small tip: Using hot air to warm up the decal a little before applying, heated sticker will fit more tightly and make less bubbles. The hair blow dryer is fine.
Here is also a video "Install Hover Drifting Board Decal by GameXcel" on YouTube as your reference.
BEST SELLERS
Product Description
Sticker for Two Wheel Balancing Scooters Protective Cover Decal
Just fit for Swagtron T1
Self-Balancing Scooter Skin hover board sticker give your Self Balance Motorized Board a stylish look and protect it from abuse. It creates a new look to your an electric skateboard and sets you apart from the crowd.
GameXcel vinyl wrappers also provide basic scratch protection to keep your bluetooth hover long eletric boards in prime condition at all times. This Self Balancing Board Skins feature ultra-high gloss inks and then covered with a clear protective layer for ultimate durability by 3M. All GameXcel use a patented repositionable and removable adhesive for fast and easy installation and goo-free removal.
This skin fits following models well:
vinyl decal sticker fit major industry electronic scooter, electric skateboard, or many two-wheel boards. It can fit for the front of the boards brands Coolreall and Wallygadgets, it apply for Swagtron T1 and may not apply for others .
Installation Instruction:
install:
1) Clean the unit's surface as thoroughly as possible.Use rubbing alcohol on a lint-free cloth to remove any grease or other contaminates. Most issues of non-sticking are due to some type of oil or grease.
2) Peel one piece of Decals from the paper liner. NOT to let the adhesive side touch anything.
3) Determine the placement, apply the Skin to the surface using your fingers or the side of your thumb, starting from one corner and working your way across the surface.
4) If a piece is not going on straight, you can gently lift it back up. Do not stretch it from its original size.
5) If installed slowly and carefully, there should be NO air bubbles left under the sticker. Any air that may become trapped during installation will go away in time.
6) During the cold weather or for a better result, apply hot air to the decal surface by using a hair dryer or hot air gun to activate chemical agent while putting the sticker. Especially heat up the edge surface. Allow at least 3 hours for cool down before touching the decal sticker skin.
Fit Swagtron T1 Skin
DIY - Do It Yourself
This decal skin fits majority hover board nicely. However, as newer models arrive, it requires some measurement and paper cutting to fit lights, ports, and logos better.
A small tip: Using hot air to warm up the decal a little before applying, heated sticker will fit more tightly and make less bubbles. The hair blow dryer is fine.
Here is also a video "Install Hover Drifting Board Decal by GameXcel" on YouTube as your reference.
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
