NetAlly LRAT-2000-KIT LinkRunner AT & IntelliTone Pro Copper Fiber Ethernet Network Test Kit

Portable troubleshooting device for analyzing and testing Ethernet networks over copper and fiber optic cable infrastructure

Stores and performs automated connectivity tests to help identify and analyze network problems

Analyzes copper or fiber cabling infrastructure, verifies connections at 10M/100M/1G, validates power over Ethernet (PoE) performance, and discovers VLAN ports and switches to help identify potential issues

Measures the availability and responsiveness of network services, including DHCP and DNS, to diagnose and solve complex issues

Includes the IntelliTone Pro 200 probe for detecting IntelliTone digital signals and 500 to 1,200 Hz analog signals to locate, trace, and isolate copper cabling

Retail Price: $ 2533.33

Wholesale Price: Inquire Now


Two Models: LRAT-2000 and LRAT-1000 LinkRunner AT is available in two models: LRAT-2000 and LRAT-1000. LinkRunner AT 2000 adds the following exclusive* features: • Fiber support* • TruePower PoE Power Test up to 30W* • IPv6 support* • Reflector support* • More result storage: 50 instead of 10* • Uses Li-ION rechargeable battery instead of AA battery pack *These exclusive features cannot be added to the LinkRunner AT 1000.	Cable length, Wiremap, and Location Users can easily find opens, shorts, miswires, and split pairs in three different ways: • On non-terminated cable • With a WireView Cable Identifier • Check patch cord with the built-in wiremap port on the side of the LinkRunner AT Cable Location Locate cable runs with toning, switch port advertisement, switch port link light blinking, and remote cable identifiers. Toning supports both analog and digital IntelliTone modes.	Discover Nearest Switch and VLAN The LinkRunner AT uses the IEEE Link Layer Discovery Protocol (LLDP), along with the Cisco and Extreme Discovery Protocols (CDP and EDP) to display the nearest switch model, slot, port and VLAN configured. The LinkRunner AT displays the following critical nearest switch information: • Switch name and model • Chassis, slot and port • Switch IP address • Voice and Data VLAN IDs • Duplex and speed (actual and advertised) • Signal Strength • Connection (MDI or MDI/X) • PoE voltage and power (actual and test limit) • Graphical representation of power on pairs	Packet Reflector The LinkRunner AT features a packet reflector mode that allows the device to be used remotely during end-to-end network path performance tests to validate LAN and WAN throughput capabilities, up to 1Gbps. The reflector mode can be configured to swap MAC and/or IP addresses. LinkRunner AT 2000 supports packet reflection for: • OptiView XG Network Analysis Tablet • OneTouch AT Network Assistant • EtherScope Network Assistant • MetroScope Service Provider Assistant

Automated Test Results Management

Serving as a centralized test results and device management system, the free Link-Live cloud service transforms team workflows with the ability to quickly and easily log, document, and report test activity from all LinkSprinter, LinkRunner AT, LinkRunner G2, AirCheck G2, and OneTouch AT hand-held network testers. Once the instrument is connected to the Link-Live Cloud service, your test results are automatically uploaded to the dashboard for project management and reporting. You have the option of uploading additional files, screenshots, images, profiles, packet captures, location information, and comments anytime. Also, certain NetAlly instruments with AllyCare Support can receive firmware updates “over the network” from Link-Live as they become available.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

NetAlly LRAT-2000-KIT LinkRunner AT & IntelliTone Pro Copper Fiber Ethernet Network Test Kit

BEST SELLERS

Product introduction

Shipping Notices

The NetAlly LinkRunner AT Network Auto-Tester is the fastest way to solve network connectivity problems. This rugged, handheld network tester takes the guesswork out of troubleshooting with its complete one-button Auto Test. The Auto Test performs your required set of connectivity tests in 10 seconds, enabling you to accurately and quickly identify and solve network problems. The extended test kit adds accessories to increase troubleshooting capabilities.

From the manufacturer


Two Models: LRAT-2000 and LRAT-1000 LinkRunner AT is available in two models: LRAT-2000 and LRAT-1000. LinkRunner AT 2000 adds the following exclusive* features: • Fiber support* • TruePower PoE Power Test up to 30W* • IPv6 support* • Reflector support* • More result storage: 50 instead of 10* • Uses Li-ION rechargeable battery instead of AA battery pack *These exclusive features cannot be added to the LinkRunner AT 1000.	Cable length, Wiremap, and Location Users can easily find opens, shorts, miswires, and split pairs in three different ways: • On non-terminated cable • With a WireView Cable Identifier • Check patch cord with the built-in wiremap port on the side of the LinkRunner AT Cable Location Locate cable runs with toning, switch port advertisement, switch port link light blinking, and remote cable identifiers. Toning supports both analog and digital IntelliTone modes.	Discover Nearest Switch and VLAN The LinkRunner AT uses the IEEE Link Layer Discovery Protocol (LLDP), along with the Cisco and Extreme Discovery Protocols (CDP and EDP) to display the nearest switch model, slot, port and VLAN configured. The LinkRunner AT displays the following critical nearest switch information: • Switch name and model • Chassis, slot and port • Switch IP address • Voice and Data VLAN IDs • Duplex and speed (actual and advertised) • Signal Strength • Connection (MDI or MDI/X) • PoE voltage and power (actual and test limit) • Graphical representation of power on pairs	Packet Reflector The LinkRunner AT features a packet reflector mode that allows the device to be used remotely during end-to-end network path performance tests to validate LAN and WAN throughput capabilities, up to 1Gbps. The reflector mode can be configured to swap MAC and/or IP addresses. LinkRunner AT 2000 supports packet reflection for: • OptiView XG Network Analysis Tablet • OneTouch AT Network Assistant • EtherScope Network Assistant • MetroScope Service Provider Assistant

Automated Test Results Management

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.