Bertech ESD Rubber Mat Kit, 2 Feet Wide x 6 Feet Long x 0.06 Inches Thick, Blue, Includes a Wrist Strap and Grounding Cord, RoHS and REACH Compliant (Assembled in USA)

SURFACE RESISTIVITY: Resistance-to-Ground: 10e7 - 10e9 ohms & Point-to-Point Resistance: 10e3 - 10e5 ohms

KIT: Includes an ESD rubber mat, a wrist strap with removable alligator clip, and grounding cord

MATERIAL: Made from ESD Safe Two Layer Rubber material: Blue Rubber Top, Black Bottom Rubber Layer

THICKNESS: 0.060 inches +/- 10%; 1/16 inches

APPLICATIONS: Aerospace, Electronic Manufacturing, Fiber Optics, and Soldering

size:

2' Wide x 6' Long x 0.06" Thick

Retail Price: $ 92.0

Wholesale Price: Inquire Now

Specializing in:

- ESD Mat Kits.

- Kapton Tapes.

- Finger Cots.

- Anti Fatigue Mats.

View larger

Commercial uses:

Aerospace assembly
Contract manufacturing
Electronic assembly
Semi-conductor facilities
Soldering

ESD Two Layer Rubber Mat Kit

Assembled in the USA, RoHS Compliant

Avoid the cost of replacing a piece of equipment or repairing an electronic board with the use of this in your home or office. The mat is made of 1/16 inch thick two layer rubber material. The top is static dissipative rubber laminated to a conductive bottom rubber layer. The kit is completed with a common ground cord and an adjustable fabric wrist strap.

Great for your home or office workbench
Perfect for people who work with electronics on a regular basis
Stains are easy to remove.

How to Install an ESD Workstation

1. Lay the table mat flat on the workbench with the snaps toward the operator.

2. Connect the common point ground cord to the table mat by snapping it to the left or right snap.

3. Connect the coil cord to the common point ground cord by plugging the banana plug into one of the ground cord's banana jacks.

4. Snap the wrist band to the coil cord. TIP: Make sure that the operator wears the wrist band on bare skin and tightens the band so that no gap exists between the skin and the band.

5. Lay the floor mat on the floor in front of the workbench with the snaps toward the bench.

6. Connect the floor mat ground cord to one snap on the floor mat.

7. Connect the common point ground cord and floor mat ground cord to ground. Use the green wire building ground point as specified in EOS/ESD Standard 6. Connection to this ground point most easily accomplished by removing the center AC outlet plate cover screw, placing the screw through the eyelets from both ground cords, and replacing the screw. The wires can be moved to the left and right sides of the screw so that they do not obstruct the outlet.


	ESD Soldering Mat Kit, Blue	ESD Soldering Mat Kit, Gray	ESD High Temperature Mat Kit, Blue	ESD High Temperature Mat Kit, Gray	ESD High Temperature Mat Kit, Green
Resistance to Ground (Rtg)	10^8 - 10^9	10^8 - 10^9	8 x 10^6 - 10^8	8 x 10^6 - 10^8	8 x 10^6 - 10^8
Point to Point Resistance	10^5 - 10^6	10^5 - 10^6	2 x 10^6 - 10^8	2 x 10^6 - 10^8	2 x 10^6 - 10^8
Thickness	0.06	0.06	0.08	0.08	0.08
Material	Rubber	Rubber	Rubber	Rubber	Rubber
Bertech Product Series	2059S	2059S	2059T	2059T	2059T
Applications	Electronic assembly, Electronic repair facilities, Soldering in high temperature setting	Electronic assembly, Electronic repair facilities, Soldering in high temperature setting	Aviation, Electronic assembly, Soldering in high temperature setting	Aviation, Electronic assembly, Soldering in high temperature setting	Aviation, Electronic assembly, Soldering in high temperature setting

About Bertech

Customers

Apple
Intel
Google
Facebook
Tesla
Major Universities
DOD
NASA

Commercial Applications:

Aviation, Cleanroom, Computer operators, Computer technicians, Electronic assembly, Fiber optics manufacturing, Hospitals and Pharmacies, Aerospace, Automotive, Solar industries, Restaurants, Grocery stores and 3D printing

Bertech is a leading source of Electrostatic Discharge (ESD) Products, Kapton Tapes, and Finger Cots. We strive to deliver one of the best product for your home or business at competitive prices.

Bertech has been a corporation since 1990. We are located in Torrance, California. Inc. Magazines' Inc. 500 recognized us as one of the top 500 fastest growing companies for three years. In addition, we were recognized by Purchasing magazine and Diversity in 2000.

ESD products are primarily used to prevent electronic circuit boards and other electronic products from electrostatic charge. Static control is critical during electronic manufacturing.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Bertech ESD Rubber Mat Kit, 2 Feet Wide x 6 Feet Long x 0.06 Inches Thick, Blue, Includes a Wrist Strap and Grounding Cord, RoHS and REACH Compliant (Assembled in USA)

BEST SELLERS

Product introduction

Shipping Notices

Bertech ESD Rubber Mat Kits are .060 inches thick and have two layers. The top layer is a blue, static dissipative rubber layer laminated to a black conductive rubber bottom layer. These ESD Two Layer Mat Kits provide excellent resistance to oil, grease, and most common solvents. They are very light compared to our single layer and three layer mats. The Kit includes an ESD mat, common point ground cord, and an adjustable fabric wrist strap with a removable alligator clip. RoHS and REACH Compliant.

From the manufacturer

Specializing in:

- ESD Mat Kits.

- Kapton Tapes.

- Finger Cots.

- Anti Fatigue Mats.

View larger

Commercial uses:

Aerospace assembly
Contract manufacturing
Electronic assembly
Semi-conductor facilities
Soldering

ESD Two Layer Rubber Mat Kit

Assembled in the USA, RoHS Compliant

Great for your home or office workbench
Perfect for people who work with electronics on a regular basis
Stains are easy to remove.

How to Install an ESD Workstation

1. Lay the table mat flat on the workbench with the snaps toward the operator.

2. Connect the common point ground cord to the table mat by snapping it to the left or right snap.

3. Connect the coil cord to the common point ground cord by plugging the banana plug into one of the ground cord's banana jacks.

4. Snap the wrist band to the coil cord. TIP: Make sure that the operator wears the wrist band on bare skin and tightens the band so that no gap exists between the skin and the band.

5. Lay the floor mat on the floor in front of the workbench with the snaps toward the bench.

6. Connect the floor mat ground cord to one snap on the floor mat.


	ESD Soldering Mat Kit, Blue	ESD Soldering Mat Kit, Gray	ESD High Temperature Mat Kit, Blue	ESD High Temperature Mat Kit, Gray	ESD High Temperature Mat Kit, Green
Resistance to Ground (Rtg)	10^8 - 10^9	10^8 - 10^9	8 x 10^6 - 10^8	8 x 10^6 - 10^8	8 x 10^6 - 10^8
Point to Point Resistance	10^5 - 10^6	10^5 - 10^6	2 x 10^6 - 10^8	2 x 10^6 - 10^8	2 x 10^6 - 10^8
Thickness	0.06	0.06	0.08	0.08	0.08
Material	Rubber	Rubber	Rubber	Rubber	Rubber
Bertech Product Series	2059S	2059S	2059T	2059T	2059T
Applications	Electronic assembly, Electronic repair facilities, Soldering in high temperature setting	Electronic assembly, Electronic repair facilities, Soldering in high temperature setting	Aviation, Electronic assembly, Soldering in high temperature setting	Aviation, Electronic assembly, Soldering in high temperature setting	Aviation, Electronic assembly, Soldering in high temperature setting

About Bertech

Customers

Apple
Intel
Google
Facebook
Tesla
Major Universities
DOD
NASA

Commercial Applications:

Bertech is a leading source of Electrostatic Discharge (ESD) Products, Kapton Tapes, and Finger Cots. We strive to deliver one of the best product for your home or business at competitive prices.

ESD products are primarily used to prevent electronic circuit boards and other electronic products from electrostatic charge. Static control is critical during electronic manufacturing.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.