Part No. 279838 Dryer Heating Element

The heating element turns electricity into heat.

Remove the back cover of the dryer. As you face the back of the dryer the heating element will be located in the tube running vertically on the right hand side.

When the element fails the dryer turns but does not heat. It is essential to confirm the heating element is bad since other components such as thermodiscs & fuses can produce the same symptom. Also check for 220 volts at the back of the dryer. The dryer will run but not heat when 110 volts is present instead of 220 volts. Cycle the dryer circuit breakers off and back on if 220 volts is not present.

If there is no continuity through the heating element, it is bad. Visually inspect element for break.

Heating element 279838 can provide enough heat to the dryer.Thermal cut-off 279816 prevents the dryer

from overheating when the dryer high limit thermostat fails in a closed circuit condition.

Package Includes:

1 PC 279838 Heating Element

1 PC 279816 Thermal Cut-Off Kit

[Supported Models]:If you are not sure whether the model is suitable, leave QA!

110.6012990,110.6085299,1106012510,11060222511,11060602990,11060612990,

1106062110,11060702990,11060722990,11060727990,11060817990,11060832990,

11060852990,11060854990,11060882990,11060887990,11061202011,11061252010,etc

1CWED5100VQ0,1CWED5100VQ1,1CWED5200VQ0,1CWED5200VQ1,1CWED5300VW0,

1CWED5700VW0,1MWED1750EM0,4GWED4750YQ0,4GWED4750YQ1,4GWED4750YQ2,

4GWED4900YQ0,4GWED4900YQ1,4GWED4900YQ2,4GWED4900YQ3,4GWED4900YW0,

4GWED4900YW1,4GWED4900YW2,4KWED5790VW0,4KWED5790VW1,4LEC7646EN0,

4LEC7646EQ0,4LEC7646EZ0,etc