Note:
- Please follow our user manual to connect car radio.
- If you are not familiar at electronic installation, and don't have experience at it, please hire a professional. These professionals will ensure that your equipment in installed correctly and function safely
Ready-made solutions tocommon problems:
- Randomly shuts off and takes turn back on
Solution 1. check every wringing part, the power connector, the wires connection are connected firmly and correctly
Power cable wiring diagram:
Red cable - ACC (power switch)
Yellow cable - positive 12V battery
Black cable - 12V battery negative
Solution 2. Cover the cables separately with insulating tape to avoid contact with the iron
- Touch screen doesn't work properly
Solution1: try to replug the screen display cable inside the car radio
Solution2: Enter Screen Calibration Mode via this path:
Setting - Factory setting - password 8888 - Screen Calibration
- How to turn on button light on the front left panel
You can set it via
Setting - Factory setting (password 8888) - Key light setting - tick all three options below
If you want it only light at night, please confirm you connect the "ILL" cable to your car's headlight positive.
Then set the brightness mode in Setting-brightness.