FAQs:
Q1: How to register the booster with Serial Number ?
A: Not all of consumers require to register the booster . It depends on your area location requirement.If you need to register it,
The Guides to signal booster Registration:
Step 1: Open the following registeration link given , www.waveform.com/pages/guide-to-signal-booster-registration
Step 2: Find out cell carriers(Verizon) that compatible with your booster. Click and Enter
Step 3: Fill in your Location informations as required. and fill in Booster's Serial Number .Very easy to register.
Please note : Registered Serial Number is the FCC ID ( you can find FCC ID on the Label of cell booster device ).
Q2: What does it mean when the booster indicator red light is on ?
A1: It is not defective. If the booster keep blinking green / steady red light and signal not improved , it mostly becauses of the Outdoor antenna is too close to the indoor antenna signal interference. or, There is space signal interference happened , so the Booster AGC stay on Over power or self-oscillation, so , the signal not improved temporarily .
A2: Solution: Turn off the DC power adapter, Move the outdoor antenna further away from indoor antenna. Make sure the two antennas separated by walls and the isolated distance 25-32ft as suggested. Restart the power supply. If not help, contact seller for other solutions.