Kindly note:Kindly read the User Manual carefully before using! this Mini Spy Camera does not support 5GHz WiFi for remote.

The camera have 2 modes.How to check camera in which mode:

AP Connection Mode(Blue Light Indicator) by connecting the camera's WiFi

IP Connection Mode(Red Light Indicator) to realize Global Remote Viewing

Steps to set IP Connection Mode.Connect the phone and camera via WiFi Router to realize Global Remote Viewing:

1.Open the camera.Enter the phone settings to find WLAN function, find the signal. choose iCooky_***** from available networks and type in password 12345678 and connect. (Warm Prompt: The effective range of the WiFi signal iCooky_***** sent by the camera is within 10 meters. When the mobile phone exceeds the range, it will be disconnected from the WiFi signal.)

2. Open the APP (iCookyCam), Log into iCookyCam APP, click the "+" in the middle or below the interface, then choose “Not been connected to the router”, click “Next” to enter the add device interface, input “ok123456”in the device password bar and then click “√”, APP will prompt “Connect to the router?”, please select “Yes” to enter the "Wi-Fi Network" setup interface. Choose the network you want to connect and input the right Wi-Fi password, then click “Connect”(Warm Prompt: For your personal privacy, please change the default password of the camera in time!!!)

3. The camera starts to restart after click “Connect”, Please wait for about 90 seconds, at the same time, APP automatically returns to the device list interface and successfully adds the camera to the list. The red indicator flashes slowly after the camera reboots, and the camera turns into IP connection mode. Click the camera in the list to preview the image and control the camera.You can check and control the camera from anywhere now.

Kindly Note:TF card is NOT included!

Package List:

1x mini spy camera

1x USB cable

1x bike mount

1x suction mount

2 x metal sheets

2x stickers

1x user manual

1xGurmoir lens clean cloth

Warm Prompt:

1. Please choose the right network and type the incorrect password. The camera turns to AP mode if the wrong password were typed in, blue indicator flashes slowly in AP mode. Please click Delete on APP and withdraw from APP, check out APP and add a device again.

2. In order to improve the stability and success rate of WiFi connection, try to be close to the wireless router.

3. For initial use, the device requires a certain amount of time for the IP connection. Please wait patiently. ( About 1-3 minutes based on network conditions). After the IP connection is successful, the red indicator flashes slowly. After multiple refreshes, if still showing offline, please try to check the network environment of the device and the mobile phone is good or not.

4.SSID with special characters and 5G networks are both not compatible with APP. Only 2.4G frequency WiFi is supported, 5G frequency WiFi is not supported temporarily, and WiFi encryption mode can not be WEP mode, and the password can not be empty.