- Induces a frequency into a buried pipe for active location and tracing of the feature
- Can locate non-metallic pipes
- Helps provide more accurate depth measurement than locating with just a receiver and transmitter
- Operates at a 33 kilohertz (kHz) frequency
- For use with the R-3500 receiver in the Amprobe AT-3500 and pipe and cable locating system
Safety Certification:
All Amprobe tools, including the Amprobe MLS55-3, are rigorously tested for safety, accuracy, reliability, and ruggedness in our state-of-the-art test lab. In addition, Amprobe products that measure electricity are listed by a 3rd party safety lab, either UL or CSA. This system assures that Amprobe products meet or exceed safety regulations and will perform in a tough, professional environment for many years to come.
Amprobe MLS55-3 Pipe Transmitter for AT-3500 Underground Cable Locator
The Amprobe MLS55-3 accessory improves speed and accuracy of the Amprobe AT-3500
The Amprobe MLS55-3 sonde pipe transmitter induces a frequency into a buried pipe for tracing the pipe with the R-3500 receiver in the Amprobe AT-3500 underground cable and pipe locating system (not included). The MLS55-3 sonde pipe locator can locate non-metallic pipes and, when used with a transmitter and receiver, it helps provide a more accurate depth measurement than when locating with just a receiver and transmitter. The M-5000 operates at a 33 kilohertz (kHz) frequency. It measures 4.8 x 0.74 x 0.74 inch (H x W x D). (H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; and D is depth, the horizontal distance from front to back).
Amprobe AT-3500 Underground Cable Locator sold separately.
- Induces a frequency into a buried pipe for active location and tracing of the feature.
- Can locate non-metallic pipes.
- Helps provide more accurate depth measurement than locating with just a receiver and transmitter.
- Operates at a 33 kilohertz (kHz) frequency.
- For use with the R-3500 receiver in the Amprobe AT-3500 and pipe and cable locating system.
Identify Underground Cables, Pipes & WiresThe Amprobe AT-3500 discovers the location of underground pipes, cables, and wires. Its innovative design allows the AT-3500 to measure depths up to or exceeding 16 feet. The transmitter operates at a 33 kilohertz (kHz) frequency signal, which provides the most reliable results for most locating applications. The Amprobe AT-3500 also comes with a connection cable and alligator clip for connecting the transmitter to the buried pipe, cable, or wire to be traced. |
Expert Features for Any SituationThe AT-3500 can be used in different modes for optimal tracing in any situation. The passive power mode locates energized wires with a 50/60 Hz frequency and does not require a transmitter. The receiver alone detects electromagnetic fields emitted by buried energized lines conducting currents. Passive radio mode does not require a transmitter and uses the receiver to detect radio waves coming from cellular towers, radio stations, etc. that are picked up and carried by underground metal objects, such as cables or pipes. The inductive active mode uses the transmitter to wirelessly induce a signal into a buried pipe, cable, or wire. The receiver then detects the signal carried by the buried utility, which enables tracing. In active direction connection mode, the transmitter is connected to the buried utility with test leads (provided there is an available access point to the utility). The transmitter then sends a signal across the wire or pipe, which enables tracing. The AT-3500 can even trace non-metallic pipes that do not conduct a tracing signal. Some of these pipes have embedded metal trace that will conduct signal for tracing. In active inductive or direct connection modes, the AT-3500 can also be used to trace other-nonmetallic pipes by using existing metal wires inside the pipe or inserting metal fish tape into the pipe. |
Additional FeaturesThe AT-3500 transmitter has two signal strength settings. The low-output 0.1 watt (W) signal strength setting conserves battery life and the high-output 0.5W signal strength setting enables long distance tracing. The transmitter can also provide a pulsing signal to conserve battery life, improve detection when then signal is weak, or distinguish the transmitted signal from interference in the area in addition to providing a continuous signal for an accurate depth reading. The transmitter has a battery charge indicator that shows when it is low on life. Likewise, the receiver has a battery charge indicator as well as two signal gain settings for adjusting signal sensitivity. In automatic signal gain mode, the receiver adjusts sensitivity based on the strength of the signal emitted by the buried utility. In manual signal gain mode, the user adjusts the receiver’s sensitivity for precise locating in areas with interference. A nylon carrying case with wheels helps protect the receiver and transmitter from damage during transportation and storage, complete with a pouch that organizes the ground stake, cables, and alligator clips. It also comes with a ground stake, cable, and alligator clip for grounding the transmitter when it is directly connected to the buried fixture. |
What's in the box?MLS55-3 Pipe Transmitter and Attachment components. |
Amprobe builds rugged, reliable test and measurement tools
Our products have been trusted by professional electricians and HVAC technicians for over 65 years and range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. Rugged built electrical test tools with verified quality and safety, Amprobe offers practical, reliable tools at a fair price. Over the last six decades Amprobe has become a leading manufacturer of safe, reliable electrical test tools for industrial, commercial and residential applications with over 500 products worldwide. Amprobe not only invented the first clamp meter and the first wire tracer, but has also been consistently first to market with innovative solutions to better meet the needs of our professional customers. All Amprobe tools undergo rigorous testing to ensure quality and full compliance with the latest IEC and CE safety regulations in our state of the art environmental and safety testing labs and are further listed with third party certification labs.
Our commitment to high-quality products and customer service is demonstrated by our industry exclusive 'No Hassle' warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot.
|
|
|
|
|---|---|---|---|
| AT-3500 Underground Cable Locator | MLS55-3 Pipe Transmitter for AT-3500 | SC-3500 4-inch Signal Clamp for AT-3500 | |
| Recommended Accessories | Discovers the location and depth of underground pipes, cables and wires. | Induces a frequency into a buried pipe for tracing the pipe with the R-3500 receiver in the Amprobe AT-3500 underground cable and pipe locating system. | Attaches around a metallic buried pipe, cable, or wire to induce a transmitted signal into the feature for active location and tracing. |
BEST SELLERS
From the manufacturer
Safety Certification:
All Amprobe tools, including the Amprobe MLS55-3, are rigorously tested for safety, accuracy, reliability, and ruggedness in our state-of-the-art test lab. In addition, Amprobe products that measure electricity are listed by a 3rd party safety lab, either UL or CSA. This system assures that Amprobe products meet or exceed safety regulations and will perform in a tough, professional environment for many years to come.
Amprobe MLS55-3 Pipe Transmitter for AT-3500 Underground Cable Locator
The Amprobe MLS55-3 accessory improves speed and accuracy of the Amprobe AT-3500
The Amprobe MLS55-3 sonde pipe transmitter induces a frequency into a buried pipe for tracing the pipe with the R-3500 receiver in the Amprobe AT-3500 underground cable and pipe locating system (not included). The MLS55-3 sonde pipe locator can locate non-metallic pipes and, when used with a transmitter and receiver, it helps provide a more accurate depth measurement than when locating with just a receiver and transmitter. The M-5000 operates at a 33 kilohertz (kHz) frequency. It measures 4.8 x 0.74 x 0.74 inch (H x W x D). (H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; and D is depth, the horizontal distance from front to back).
Amprobe AT-3500 Underground Cable Locator sold separately.
- Induces a frequency into a buried pipe for active location and tracing of the feature.
- Can locate non-metallic pipes.
- Helps provide more accurate depth measurement than locating with just a receiver and transmitter.
- Operates at a 33 kilohertz (kHz) frequency.
- For use with the R-3500 receiver in the Amprobe AT-3500 and pipe and cable locating system.
Identify Underground Cables, Pipes & WiresThe Amprobe AT-3500 discovers the location of underground pipes, cables, and wires. Its innovative design allows the AT-3500 to measure depths up to or exceeding 16 feet. The transmitter operates at a 33 kilohertz (kHz) frequency signal, which provides the most reliable results for most locating applications. The Amprobe AT-3500 also comes with a connection cable and alligator clip for connecting the transmitter to the buried pipe, cable, or wire to be traced. |
Expert Features for Any SituationThe AT-3500 can be used in different modes for optimal tracing in any situation. The passive power mode locates energized wires with a 50/60 Hz frequency and does not require a transmitter. The receiver alone detects electromagnetic fields emitted by buried energized lines conducting currents. Passive radio mode does not require a transmitter and uses the receiver to detect radio waves coming from cellular towers, radio stations, etc. that are picked up and carried by underground metal objects, such as cables or pipes. The inductive active mode uses the transmitter to wirelessly induce a signal into a buried pipe, cable, or wire. The receiver then detects the signal carried by the buried utility, which enables tracing. In active direction connection mode, the transmitter is connected to the buried utility with test leads (provided there is an available access point to the utility). The transmitter then sends a signal across the wire or pipe, which enables tracing. The AT-3500 can even trace non-metallic pipes that do not conduct a tracing signal. Some of these pipes have embedded metal trace that will conduct signal for tracing. In active inductive or direct connection modes, the AT-3500 can also be used to trace other-nonmetallic pipes by using existing metal wires inside the pipe or inserting metal fish tape into the pipe. |
Additional FeaturesThe AT-3500 transmitter has two signal strength settings. The low-output 0.1 watt (W) signal strength setting conserves battery life and the high-output 0.5W signal strength setting enables long distance tracing. The transmitter can also provide a pulsing signal to conserve battery life, improve detection when then signal is weak, or distinguish the transmitted signal from interference in the area in addition to providing a continuous signal for an accurate depth reading. The transmitter has a battery charge indicator that shows when it is low on life. Likewise, the receiver has a battery charge indicator as well as two signal gain settings for adjusting signal sensitivity. In automatic signal gain mode, the receiver adjusts sensitivity based on the strength of the signal emitted by the buried utility. In manual signal gain mode, the user adjusts the receiver’s sensitivity for precise locating in areas with interference. A nylon carrying case with wheels helps protect the receiver and transmitter from damage during transportation and storage, complete with a pouch that organizes the ground stake, cables, and alligator clips. It also comes with a ground stake, cable, and alligator clip for grounding the transmitter when it is directly connected to the buried fixture. |
What's in the box?MLS55-3 Pipe Transmitter and Attachment components. |
Amprobe builds rugged, reliable test and measurement tools
Our products have been trusted by professional electricians and HVAC technicians for over 65 years and range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. Rugged built electrical test tools with verified quality and safety, Amprobe offers practical, reliable tools at a fair price. Over the last six decades Amprobe has become a leading manufacturer of safe, reliable electrical test tools for industrial, commercial and residential applications with over 500 products worldwide. Amprobe not only invented the first clamp meter and the first wire tracer, but has also been consistently first to market with innovative solutions to better meet the needs of our professional customers. All Amprobe tools undergo rigorous testing to ensure quality and full compliance with the latest IEC and CE safety regulations in our state of the art environmental and safety testing labs and are further listed with third party certification labs.
Our commitment to high-quality products and customer service is demonstrated by our industry exclusive 'No Hassle' warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot.
|
|
|
|
|
|---|---|---|---|
| AT-3500 Underground Cable Locator | MLS55-3 Pipe Transmitter for AT-3500 | SC-3500 4-inch Signal Clamp for AT-3500 | |
| Recommended Accessories | Discovers the location and depth of underground pipes, cables and wires. | Induces a frequency into a buried pipe for tracing the pipe with the R-3500 receiver in the Amprobe AT-3500 underground cable and pipe locating system. | Attaches around a metallic buried pipe, cable, or wire to induce a transmitted signal into the feature for active location and tracing. |
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
