1000g grain mill voltage is 110V; load power is 2800W and the rated power is 550W.
2000g grain mill voltage is 110V; load power is 3500W and the rated power is 550W.
Grind dry items into fine powder within 1 minute, The grinding time can be prolonged or shortened according to your needs.
After working for 1-5 minutes, you can stop it for about 30 seconds to prevent the machine motor from overheating.
The carbon brush motor may generate sparks in the case of overload, and emit the smell of carbon brush, which is a bit like burning smell. Please Tighten the carbon brushes on both sides or Reducing the amount of grinding powder can avoid this situation.
Please don't over the capacity once a time ( 350g / 500g / 750g / 1000g / 2000g ) .
Please don't fill up grinder 100% , leave some space for the machine to work will be more efficient.
If the machine doesn't work, please check if the carbon brushes are loosing. Reinstall them.
Please make sure off items you grinding is dry.
From coffee beans to pepper, from soya bean to pearl, from spices to stone, all can be grinded.
How to exchange Carbon Brushes
Three steps to exchange carbon brush
Please find the carbon brush port on both side of the grinder.
Please rotate the nut counterclockwise with a slotted screwdriver till the little carbon brush loose enough to take out.
Put your new carbon brush into the port, and tighten the nut clockwise.
Tips:
Sometimes the grinder machine is not working without any performance such as bad smell or smoke. Please don't worry and cut off the power. Check whether the CARBON BRUSHES are loosing, please tighten them then try to start the grinder.
1000g grain mill voltage is 110V; load power is 2800W and the rated power is 550W.
2000g grain mill voltage is 110V; load power is 3500W and the rated power is 550W.
Grind dry items into fine powder within 1 minute, The grinding time can be prolonged or shortened according to your needs.
After working for 1-5 minutes, you can stop it for about 30 seconds to prevent the machine motor from overheating.
The carbon brush motor may generate sparks in the case of overload, and emit the smell of carbon brush, which is a bit like burning smell. Please Tighten the carbon brushes on both sides or Reducing the amount of grinding powder can avoid this situation.
Please don't over the capacity once a time ( 350g / 500g / 750g / 1000g / 2000g ) .
Please don't fill up grinder 100% , leave some space for the machine to work will be more efficient.
If the machine doesn't work, please check if the carbon brushes are loosing. Reinstall them.
Please make sure off items you grinding is dry.
From coffee beans to pepper, from soya bean to pearl, from spices to stone, all can be grinded.
How to exchange Carbon Brushes
Three steps to exchange carbon brush
Please find the carbon brush port on both side of the grinder.
Please rotate the nut counterclockwise with a slotted screwdriver till the little carbon brush loose enough to take out.
Put your new carbon brush into the port, and tighten the nut clockwise.
Tips:
Sometimes the grinder machine is not working without any performance such as bad smell or smoke. Please don't worry and cut off the power. Check whether the CARBON BRUSHES are loosing, please tighten them then try to start the grinder.
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.