BTMETER BT-7200B TRMS 6000 Counts Clamp Multimeter, Digital Clamp-on Ammeter for AC/DC Current Voltage Resistance Capacitor Frequency Continuity Temperature NCV

⚡【AC DC Clamp Amp Voltmeter w/ NCV】This clamp multitester can accurately measure AC/DC Amperage, AC/DC Voltage, Resistance, Frequency or Duty Cycle, Capacitance and also provides Noncontact AC Voltage(NCV) detection, Diode, Continuity Buzzer and Temperature(℃/℉) tests. Easy to use in non-contact ampere measures, troubleshoot electrical problems in , motors, household appliances, HVAC

⚡【Continuous Data Logging Clamp DMM】This clamp-on meter can displays AC DC amps, volts, ohms, Cap, Hz Temp in Max/Min/Avg on the same interface with real-time reading. The curve graph w/ timing will show you the changes of amp volt flow more visually. Also supports adjustable data logging rates for continuous testing/ recording unless the battery is dead or the memory is full.

⚡【Reliable True RMS Voltage Amperage Meter】0.1 amp resolution for 0.1 ~ 60A AC DC current, 1A for 60 ~ 400A to support accurate amp reading, this clamp amp probe meter is more user-friendly for daily current measurement, such as troubleshooting car, boats battery

⚡【Clamp On Live Wire for Measurement】To measure amp with this clamp meter, you MUST separate the hot and neutral conductors, and clamp around only LIVE wire for measurement otherwise they will cancel each other out and give a zero amp reading. The most convenient way without peeling the cord is clamp on an AC Line Splitter

⚡【LARGE DIGITAL DISPLAY】Well built with backlit LCD for visibility in dimly light areas. Extensible thermocouple probe support measures high temperature from -4 to 1832℉(-20 to 1000℃). Jaw Caliber Size 1.77 inches (45mm)

Retail Price: $ 49.99

Wholesale Price: Inquire Now

BT-770M Auto Range multi meters digital ac dc meter voltage tester

Special Features:

Data Hold
Auto Ranging
Auto Back Light
Auto Power OFF
Continuity Alarm
Mechanical Blocking System
Non-contact Voltage Testing

Beyond A Multi-meter

BT-770M Digital Multimeter can also accurately measure temperature,Frequency, Duty Cycle.
Easy to replace fuse design, unscrew the rear cover, the fuse will expose completely, replace the fuse easily
Built with a strong Magnet in the rear cover, Free your hands when you attracted the meter on a ironwork things, also can attract spare screws and tools,save the mess.


Multi-function Autoranging Multimeter BT770M Multi-tester is equipped with indicator lamp & auto back-light function, so you can see data clearly even in the dark. Data Hold, Continuity with Alarm, Auto Power Off Function.	Mechanical Blocking System With Mechanical Blocking System & Double Fuses, you don't need to insert the test leads into the wrong hole, And 2 overload fuses for all ranges to prevent the multimeter get burned.	Multimeter with Thermometer Not only a multimeter, but also a thermometer to test temperature from -4~1832℉(-20~1000℃) Extensible temperature test probe is included with the Multimeter.	180° Swivel bracket Backside design 180 degree reversal bracket. It not only can be used as a support, but can also be used for suspension. What’s more, the back cover is equipped with magnets to adsorb the instrument on the surface of the iron materials.


	BT770M Multimeter Autoranging	BT770N Multi-meter Tester	BT570CAPP Clamp Multimeter	BT39C Multimeter Tester
Display	6000	6000	4000	6000
AC/DC Voltage MAX	750V/1000V	750V/1000V	750V/1000V	600V
AC/DC Current MAX	20A	20A	1000A	10A
Resistance MAX	60MΩ	6MΩ	40MΩ	60MΩ
Capacitance MAX	99.99mF	99.99mF	100μF	99.99mF
Temperature Testing	-4 to 1832℉	-4 to 1832℉	-20 to 1000℃	-4 to 1832℉
Frequency MAX	9.999MHz	9.999MHz	5.12MHz	9.999MHz
Duty Cycle	0.1%~99.9%	0.1%~99.9%	0.1% ~ 99.9%	0.1% ~ 99.9%
Battery Testing	X	X	X	1.5V, 9V
More Functions	Auto Backlit, Auto Range, Diode Test, hFE Test, Continuity Alarm, Auto OFF, Data Hold, Relative Value, Low Battery Display Function, Function Switch Indicator Lamp, Mechanical Blocking System, NCV	Auto Backlit, Auto Range, Diode Test, hFE Test, Continuity Alarm, Auto OFF, Data Hold, Relative Value, Low Battery Display Function, Function Switch Indicator Lamp, Mechanical Blocking System, ℃/℉ Switchable NCV	Auto Backlit, Diode Test, Continuity Alarm, Auto OFF, Data Hold, Relative Value, Phone APP Function	Auto Backlit, Diode Test, Continuity Alarm, Auto OFF,True RMS, ℃/℉ Switchable, Data Hold, NCV

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

BTMETER BT-7200B TRMS 6000 Counts Clamp Multimeter, Digital Clamp-on Ammeter for AC/DC Current Voltage Resistance Capacitor Frequency Continuity Temperature NCV

BEST SELLERS

Product introduction

Shipping Notices

BTMETER BT-770M Manual Ranging Digital Multimeter is the perfect DIY hand tool for troubleshoot electrical problems in a wide

array of industrial and household devices such as electronic equipment, motor controls, domestic appliances, power

supplies and wiring systems.

It's tough, lightweight but durable and very easy to operate. It can measure AC/DC current, AC/DC voltage, resistance,

continuity(buzzer), transistor and diodes with a very high degree of accuracy. CATIII1000V certification make sure working safety.

After years of observation and research , we hope new design substitutable fixed mode can help users more convenient

work:Fix the meter by magnet for adsorbed on the metal, convenient for both hands to carryout the measurement job.

The color-coded LEDs allow you know Voltage on/off .Includes attachable test leads, holders and stand for hands free use

and features protective rubber corner guards for drop protection.

temperature probe and User Manual.

Specifications:

Range Selection: Manual Ranging

Max Display: 6000

Sample Rate: 3 times/s

DC Voltage: 600mV~ 1000V

AC Voltage: 6V~ 750V

DC Current: 60uA~ 20A

AC Current: 6mA~ 20A Resistance: 600ohm~ 60Mohm

Capcitance:9.999Nf~99.99mF ( Auto range )

Frequency:9.999Hz~9.999Mhz ( Auto range )

Duty cycle:0.1%~99.9%

Temperature:-20℃~-1000℃-4℉~1832℉

Auto LCD Backlight: Yes

Overload protection: Yes

Data Hold: Yes

Diode Test: Yes

Low Battery indication: Yes

Auto power off

℃/℉：yes

True RMS: YES

Relative Value: yes

Continuity Test: Yes

Non Contact AC Voltage (NCV) detection

Self-Locking Protection

Functions witch indicator lamp

From the manufacturer

Special Features:

Data Hold
Auto Ranging
Auto Back Light
Auto Power OFF
Continuity Alarm
Mechanical Blocking System
Non-contact Voltage Testing

Beyond A Multi-meter

BT-770M Digital Multimeter can also accurately measure temperature,Frequency, Duty Cycle.
Easy to replace fuse design, unscrew the rear cover, the fuse will expose completely, replace the fuse easily
Built with a strong Magnet in the rear cover, Free your hands when you attracted the meter on a ironwork things, also can attract spare screws and tools,save the mess.


Multi-function Autoranging Multimeter BT770M Multi-tester is equipped with indicator lamp & auto back-light function, so you can see data clearly even in the dark. Data Hold, Continuity with Alarm, Auto Power Off Function.	Mechanical Blocking System With Mechanical Blocking System & Double Fuses, you don't need to insert the test leads into the wrong hole, And 2 overload fuses for all ranges to prevent the multimeter get burned.	Multimeter with Thermometer Not only a multimeter, but also a thermometer to test temperature from -4~1832℉(-20~1000℃) Extensible temperature test probe is included with the Multimeter.	180° Swivel bracket Backside design 180 degree reversal bracket. It not only can be used as a support, but can also be used for suspension. What’s more, the back cover is equipped with magnets to adsorb the instrument on the surface of the iron materials.


	BT770M Multimeter Autoranging	BT770N Multi-meter Tester	BT570CAPP Clamp Multimeter	BT39C Multimeter Tester
Display	6000	6000	4000	6000
AC/DC Voltage MAX	750V/1000V	750V/1000V	750V/1000V	600V
AC/DC Current MAX	20A	20A	1000A	10A
Resistance MAX	60MΩ	6MΩ	40MΩ	60MΩ
Capacitance MAX	99.99mF	99.99mF	100μF	99.99mF
Temperature Testing	-4 to 1832℉	-4 to 1832℉	-20 to 1000℃	-4 to 1832℉
Frequency MAX	9.999MHz	9.999MHz	5.12MHz	9.999MHz
Duty Cycle	0.1%~99.9%	0.1%~99.9%	0.1% ~ 99.9%	0.1% ~ 99.9%
Battery Testing	X	X	X	1.5V, 9V
More Functions	Auto Backlit, Auto Range, Diode Test, hFE Test, Continuity Alarm, Auto OFF, Data Hold, Relative Value, Low Battery Display Function, Function Switch Indicator Lamp, Mechanical Blocking System, NCV	Auto Backlit, Auto Range, Diode Test, hFE Test, Continuity Alarm, Auto OFF, Data Hold, Relative Value, Low Battery Display Function, Function Switch Indicator Lamp, Mechanical Blocking System, ℃/℉ Switchable NCV	Auto Backlit, Diode Test, Continuity Alarm, Auto OFF, Data Hold, Relative Value, Phone APP Function	Auto Backlit, Diode Test, Continuity Alarm, Auto OFF,True RMS, ℃/℉ Switchable, Data Hold, NCV

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.