EXMAX EXD-101 2.4G Portable Wireless Audio Voice Transmission Headsets Tour Guide System
Enjoy your travel with EXMAX wireless tour guide system, the tour guide can speak comfortably without shouting or distracting others nearby. Meanwhile, visitors enjoy a better experience—no more confusion or straining to understand.With our lightweight audio guide systems, you can count on crisp, clear sound performance. Overcome noise and distance issues and make sure your message is heard. Popular uses for:factory field trip, a tour guide, an exhibit guide, industrial site field trip, sermon interpretation, work-study programs, international conferences, translation guide, school audio visual laboratory, events for communities, family restaurants,Sale presentations,trade show, corporation event, any group setting...etc.
The ways of channel setting:
Firstly,please plug the microphone into the MIC port of transmitter,Press the button 2 turn on the transmitter.Then keep pressing both button 3 and button 1 simultaneously until the channel icon on the screen changes from “M” to “ID”,and one digit of channel flashes,release both button 3 and button 1. Now the transmitter has entered the channel setting mode(The right-most digit of the channel number is flashing),then you can click the button 3 or button 1 to change the channel digit:The channel number can be changed from 0001 to 9999,click the button 1 to choose the location of the digit that you want to change(every click will move from right to left,and it can repeat the move) ,the digit you choose will flash;And then you can click the button 3 to change the digit on the location you chose(it can be changed from 0 to 9).After you have set the channel digit,keep pressing button 2 for about 3-5 seconds until the four-digit channel starts flashing,then release the button 2.Now the transmitter has entered the wireless channel matching mode,Plug the single earphone to receiver then put the receiver close to transmitter and turn the receiver on, the receiver will pair up with transmitter automatically.The receiver's channels ID same as transmitter's channel ID means it syncs successfully. Now please click the transmitter’s button 2 again to get normal transmitting mode of transmitter, at this time the LCD screen shows letter "M" and all 4 digits of channel not flashing.Just talk to microphone of transmitter and receiver will receive signal from transmitter.
Use two transmitters at the same time in one team
This product allows two transmitters to work at the same time or take turns to work in one team(That means that it allows two persons to speak at the same time or take turns to speak,and all the listeners with receivers can hear).If you need to use two transmitters in one team,when you turn on the transmitters,you have to turn on one transmitter first,and then turn on the other one after the first one is turned on,don’t turn on both of them at the same time.( The first letter is “M” on the display screen of the transmitter turned on first,and the first letter is “S” on the display screen of the transmitter turned on secondly).If the first letter is “M” on the display screen of both transmitters,please turn off one of the transmitters and then turn it on again,otherwise you can hear only one of the transmitters’ voice.