allsun AC/DC Current Clamp Probe Tester Handheld Digital Clamp Multimeter CAT III Max.Input 400A/600V 50Hz-60Hz LED

▲〖Quick and Accurate AC/DC Amp Clamp Meter〗 is based on Hall Effect technology and is designed to be used in conjunction with multimeter for ac and dc current measurements.

▲〖Max. Jaw Opening〗the Clamp measures the AC current in a conductor up to 33mm without interrupting the circuit, Max. Conductor Size: ∅ 28mm.

▲〖Power/Low Voltage Indication〗When the battery's voltage is enough, the LED lights green. When the battery's voltage is less than about 7.5V, the LED lights red indicating that the battery is not high enough and should be replaced immediately.

▲〖Multifunctional & Easy to use〗Range Switch, Used to turn on/ off the Current Probe as well as to select the desired,range, ZERO Button, AC/DC Button, AC/DC Button.

▲〖Handheld Electrical Tester〗AC/DC Current Probe Digital Clamp Multimeter, it's suitable for the electrical repair,quality assurance

Retail Price: $ 36.99

Wholesale Price: Inquire Now

Very thanks for choosing allsun AC/DC Current Probe Digital Clamp Multimeter. The main products from allsun contain Car Data Saver,Multi-meter,Digital Multimeters,Digital Clamp meter,Metal Detectors,Distance Measures,Infrared Thermometer,Voltage, Battery Tester,Digital Scale and multifunction sensor all of which have an advantage in domestic and overseas markets.

If you are now looking for AC/DC Current Probe Digital Clamp Multimeter, exactly, just choose it!

INTRODUCTION: AC/DC Current Probe Digital Clamp Multimeter

Operation Instruction

7 Read the voltage reading on the display of the multimeter. Then calculate the current of the conductor by using the formula:

I=Reading/Sensitivity

(In this formula,is the current of the conductor, Reading is the voltage reading of the multimeter,
Sensitivity is the sensitivity of the selected range of the Current Probe.)

Note: 1. Do not input voltage to the output plugs of the Current Probe.

Note:

1. Do not input voltage to the output plugs of the Current Probe.

2. For DC current measurements, the display of the multimeter will also

indicate the measured current's direction. A positive reading (negative

sign "-" doesn't appear ) indicates that the current direction is from

the Current Probe's front to its back. ( Tip: Current direction is the

opposite of electron flow direction. )

3. Each time after you finish a measurement and remove the jaws from the conductor under test, there may be a residual reading on the

display. This reading must be subtracted from the measurement you just performed.

1.Set the multimeter to the desired dc voltage range.

Note: Do not set the multimeter to ac voltage range because the internal circuit of the Current Probe changes the ac current

signal into dc voltage during ac current measurement.

2. Insert the Current Probe's two output plugs to the voltage input terminals of the multimeter. (Note:The black output plug must be connected to the " COM " terminal of the multimeter.)

3. Set the Current Probe to the desired range with the range switch, the LED lights.

4. Select ac or dc current measurement with the AC/DC button according to the indication of the marks beside the AC/DC button of

the Current Probe.

5. Before dc current measurement, press and hold down the ZERO button of the Current Probe for several seconds for zeroing.

6. Press the trigger and clamp the jaws around the conductor to be measured. Make sure that the jaws are perfectly closed.

Note: a. Each time only one conductor should be clamped.

b. The conductor should be in the center of the jaws and should be perpendicular to the Current Probe.


		Packing List 1x AC/DC Current Probe Clamp Multimeter 1x Carrying Pouch 1x English User Manual

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

allsun AC/DC Current Clamp Probe Tester Handheld Digital Clamp Multimeter CAT III Max.Input 400A/600V 50Hz-60Hz LED

BEST SELLERS

Product introduction

Shipping Notices

Introduction The AC/DC Current Probe is based on Hall Effect technology and is designed to be used in conjunction with multimeter for ac and dc current measurements. Electrical Specifications Max. Measurable Current: 400A Max. Overload Capability: 600A DC/AC rms Max. Working Voltage: 600V AC rms, CAT III Output Sensitivity: 40A range: 10mV/A 400A range: 1mV/A Output Voltage: DC 0 ~ ±400mV Output Impedance: 2 ~ 3k Zero Point Error: 0.0 ± 0.2mV for all ranges when there is no current being measured ( Note: Before dc current measurement, press and hold down the ZERO button for several seconds for zeroing.) Accuracy Specification: Accuracy is specified for a period of 1 year after calibration and at 25°C ± 1°C, with relative humidity up to 75%. Accuracy is specified from 5% to 100% of range.

Product Description

If you are now looking for AC/DC Current Probe Digital Clamp Multimeter, exactly, just choose it!

INTRODUCTION: AC/DC Current Probe Digital Clamp Multimeter

Operation Instruction

7 Read the voltage reading on the display of the multimeter. Then calculate the current of the conductor by using the formula:

I=Reading/Sensitivity

(In this formula,is the current of the conductor, Reading is the voltage reading of the multimeter,
Sensitivity is the sensitivity of the selected range of the Current Probe.)

Note: 1. Do not input voltage to the output plugs of the Current Probe.

Note:

1. Do not input voltage to the output plugs of the Current Probe.

2. For DC current measurements, the display of the multimeter will also

indicate the measured current's direction. A positive reading (negative

sign "-" doesn't appear ) indicates that the current direction is from

the Current Probe's front to its back. ( Tip: Current direction is the

opposite of electron flow direction. )

3. Each time after you finish a measurement and remove the jaws from the conductor under test, there may be a residual reading on the

display. This reading must be subtracted from the measurement you just performed.

1.Set the multimeter to the desired dc voltage range.

Note: Do not set the multimeter to ac voltage range because the internal circuit of the Current Probe changes the ac current

signal into dc voltage during ac current measurement.

2. Insert the Current Probe's two output plugs to the voltage input terminals of the multimeter. (Note:The black output plug must be connected to the " COM " terminal of the multimeter.)

3. Set the Current Probe to the desired range with the range switch, the LED lights.

4. Select ac or dc current measurement with the AC/DC button according to the indication of the marks beside the AC/DC button of

the Current Probe.

5. Before dc current measurement, press and hold down the ZERO button of the Current Probe for several seconds for zeroing.

6. Press the trigger and clamp the jaws around the conductor to be measured. Make sure that the jaws are perfectly closed.

Note: a. Each time only one conductor should be clamped.

b. The conductor should be in the center of the jaws and should be perpendicular to the Current Probe.


		Packing List 1x AC/DC Current Probe Clamp Multimeter 1x Carrying Pouch 1x English User Manual

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.