Fog Lights Fit for Toyota Prius 2004 2005 2006 2007 2008 2009 (OE Style Real Glass Clear Lens w/ 9006 12V 51W Bulbs)
Fog Lights Fit for Toyota Prius 2004 2005 2006 2007 2008 2009 (OE Style Real Glass Clear Lens w/ 9006 12V 51W Bulbs)
Retail Price: $ 31.69
Wholesale Price: Inquire Now

LET THE LIGHT GUIDE YOUR WAY AND HOLD EVERY MEMORY.

Poor visibility of the road caused by heavy snow, rain, or thick fog is a quite dangerous thing because of possible car accidents. Most drivers would rather stay at home than travel in such severe conditions, but what if you do have to drive your way despite the weather? With their incredible line of fog lights, AUTOSAVER88 makes it possible for every vehicle to continue its path no matter how miserable the conditions are. The parts offer both maximum driving safety and neck-braking design everyone is craving for. These lights will enable you to see the road ahead with an impressive amount of clarity, giving off spectacular illumination that is extremely stylish as well.

SPECIFICATION AND FITMENT.

Specification:
Quantity Sold: Set of 2
Bulb Type: 9006 12V 51W
Wiring Harness: Included
Surface finish: Black housing w/ real glass clear lens
Location: Mounts using factory mounting locations
Product Fit: CAD designed to provide a perfect, factory type fit
Weather Sealed: Completely weather sealed to keep the elements out
Replaces Original (OE) Part #: 81211-52070, 81221-52070, TO2592119, TO2593119

Fitment:
Toyota Prius 2004 2005 2006 2007 2008 2009

Package Include:
1 Pair Fog Lights (Left & Right Side)

STEP-BY-STEP INSTALLATION.

Note:
Most vehicles have a hole in the firewall pre-drilled at the factory for the purpose of running wires from under the hood to the interior.

Installation:
1. Closely check your existing fog light assembly.
2. Remove the wiring harness from the fog light assembly.
3. Take out the mounting screws of your old fog light assembly. These screws are normally found at the back of the fog light assembly.
4. Take out the fog light assembly from your automobile.
5. Get your new fog light and install it on your vehicle using the mounting screws that you removed earlier.
6. Tighten the mounting screws just enough to keep your new fog light assembly securely installed. Be careful not to tighten the screws too much or they might cause damage to the assembly.
7. Get the wiring harness connected to your new fog light assembly.
8. Switch the fog lights on to see if they are working properly.

AREN'T HEADLIGHT ENOUGH?

Fog lights illuminate dark edges of the road where headlights can't. They are used to provide better visibility while driving through fog. But, you can also use it when going through places where rain, snow, or dust may be giving you a hard time moving forward with confidence.

 

Fog is typically less dense closer to the ground. Because fog lights are mounted lower on the vehicle, they encounter less glare and can light the path ahead much further.

Headlights point straight ahead and can cause glare when they reflect light from fog or snow directly back into a driver's eyes, as seen in this picture. Because fog lights are angled to the side, glare is reduced and sides of the road are more visible.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor,please click here to learn more.
...
After Sale Service:
1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy
2 The rules apply and summit for receive compensation
3 The conditions of accrual for amount insurance
3 The conditions of accrual for amount insurance
5 Damage to the parcel during international shipping, which resulted in damage to the goods in it
6 Loss of individual goods under international shipment The absence individual goods in the parcel
7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment
8 Returns Policy: Click to go to the Help Center to view the Returns Policy
...
...
Fog Lights Fit for Toyota Prius 2004 2005 2006 2007 2008 2009 (OE Style Real Glass Clear Lens w/ 9006 12V 51W Bulbs)
Fog Lights Fit for Toyota Prius 2004 2005 2006 2007 2008 2009 (OE Style Real Glass Clear Lens w/ 9006 12V 51W Bulbs)

BEST SELLERS

...

Product Description

LET THE LIGHT GUIDE YOUR WAY AND HOLD EVERY MEMORY.

Poor visibility of the road caused by heavy snow, rain, or thick fog is a quite dangerous thing because of possible car accidents. Most drivers would rather stay at home than travel in such severe conditions, but what if you do have to drive your way despite the weather? With their incredible line of fog lights, AUTOSAVER88 makes it possible for every vehicle to continue its path no matter how miserable the conditions are. The parts offer both maximum driving safety and neck-braking design everyone is craving for. These lights will enable you to see the road ahead with an impressive amount of clarity, giving off spectacular illumination that is extremely stylish as well.

SPECIFICATION AND FITMENT.

Specification:
Quantity Sold: Set of 2
Bulb Type: 9006 12V 51W
Wiring Harness: Included
Surface finish: Black housing w/ real glass clear lens
Location: Mounts using factory mounting locations
Product Fit: CAD designed to provide a perfect, factory type fit
Weather Sealed: Completely weather sealed to keep the elements out
Replaces Original (OE) Part #: 81211-52070, 81221-52070, TO2592119, TO2593119

Fitment:
Toyota Prius 2004 2005 2006 2007 2008 2009

Package Include:
1 Pair Fog Lights (Left & Right Side)

STEP-BY-STEP INSTALLATION.

Note:
Most vehicles have a hole in the firewall pre-drilled at the factory for the purpose of running wires from under the hood to the interior.

Installation:
1. Closely check your existing fog light assembly.
2. Remove the wiring harness from the fog light assembly.
3. Take out the mounting screws of your old fog light assembly. These screws are normally found at the back of the fog light assembly.
4. Take out the fog light assembly from your automobile.
5. Get your new fog light and install it on your vehicle using the mounting screws that you removed earlier.
6. Tighten the mounting screws just enough to keep your new fog light assembly securely installed. Be careful not to tighten the screws too much or they might cause damage to the assembly.
7. Get the wiring harness connected to your new fog light assembly.
8. Switch the fog lights on to see if they are working properly.

AREN'T HEADLIGHT ENOUGH?

Fog lights illuminate dark edges of the road where headlights can't. They are used to provide better visibility while driving through fog. But, you can also use it when going through places where rain, snow, or dust may be giving you a hard time moving forward with confidence.

 

Fog is typically less dense closer to the ground. Because fog lights are mounted lower on the vehicle, they encounter less glare and can light the path ahead much further.

Headlights point straight ahead and can cause glare when they reflect light from fog or snow directly back into a driver's eyes, as seen in this picture. Because fog lights are angled to the side, glare is reduced and sides of the road are more visible.

Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
... ... ...
Liquid,cream or cosmetics items are quantity limited in shopping agent service
... ... ...
Chinese medicine is limited to ship by Chinese exporting goods.
...
2 Limitation for different shipping methods:
...
3 Yoybuy Product's Label:
...
Sensitive Product(SEN)
...
Product With battery
...
Cream
...
Powder
...
Dangerous Products
...
....
4 Volume weight Requested:
...
volume weight=length*height*Width/5000
...
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
...
...
...
...
...
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.
After Sale Service:
2 The rules apply and summit for receive compensation
3 The conditions of accrual for amount insurance
3 The conditions of accrual for amount insurance
5 Damage to the parcel during international shipping, which resulted in damage to the goods in it
6 Loss of individual goods under international shipment The absence individual goods in the parcel
7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment
...

BEST SELLERS

Inquire Now
X

Contact us now

Language

Currency

    Upload image to find the same item

    Drag the image here, or Click to upload Tips: Only jpg, jpeg, png, webp

    Scan the QR code and use your phone to take a direct photo search.

    ×