Hex Lag Screws Hot Dipped Galvanized 1/2"-6 x 14"- Qty-25

[]

Retail Price: $ 92.07

Wholesale Price: Inquire Now

Hex Head Lag Screws

Hot Dip Galvanized Lag Bolts

Commonly referred to as a lag screw, lag bolt, or coach screws
Significantly larger than most other wood screws
Feature the sharp cutting threads for excellent retention in wood and other soft materials
Hot Dip Galvanized finish for corrosion resistance and durability
Typically used in heavy duty carpentry applications including lumber framing and anchoring equipment to wood such as machinery and large vices

Lag bolts feature a hex head and are designed to be driven with a wrench or hex driver. Lag screws are also commonly called lag bolts because they are significantly larger than most other screws. Essentially, they are just very large wood screws. They feature the sharp cutting threads of a wood screw or sheet metal screw and have a shoulder below the head (in longer lengths), however everything is scaled up in size for use in larger applications.

Product Specifications:

Fastener Type: Lag Screw
Material: Hot Dip Galvanized Steel
Head Style: Hex
Width Across Flats: (Max 0.750 - Min 0.736)
Width Across Corners: (Max 0.866 - Min 0.840)
Wrench Size: 3/4"
Head Height: 11/32"
Thread Diameter: 1/2"
Thread Pitch: 6 Per Inch
Thread Direction: Right Hand
Thread Type: Coarse
Other: **Hex Lag Screws in 1/2" diameter are Partially Threaded with a Shoulder below the head in lengths 1" and over***

Lag Bolts - Hot Dip Galvanized


Hot Dip Galvanized Steel Hex Head Lag Screws in this selection are made of hot dip galvanized (HDG) steel. The hot dip galvanized finish adds corrosion resistance and durability making these screws suitable for exterior use and applications exposed to the elements.	Hex Head, Lag Threads Lag Screws are essentially heavy duty wood screws. Often referred to as lag bolts because of their larger size, Lag Screws feature sharp cutting threads that provide excellent retention in wood and other soft materials. In longer lengths, lag screws feature a shoulder beneath the head for increased holding power, making them more resistant to pull-out for heavy duty applications. The hex head has replaced the screwdriver style of smaller wood screws due to the size of the fastener.	Common Applications Lag bolts are commonly used in carpentry, used to lag together lumber framing, to lag machinery feet to wood floors, and other heavy carpentry applications. They can also be used with Lag Shield masonry anchors to anchor fixtures to concrete and other masonry materials.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Hex Lag Screws Hot Dipped Galvanized 1/2"-6 x 14"- Qty-25

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Hex Head Lag Screws

Hot Dip Galvanized Lag Bolts

Commonly referred to as a lag screw, lag bolt, or coach screws
Significantly larger than most other wood screws
Feature the sharp cutting threads for excellent retention in wood and other soft materials
Hot Dip Galvanized finish for corrosion resistance and durability
Typically used in heavy duty carpentry applications including lumber framing and anchoring equipment to wood such as machinery and large vices

Product Specifications:

Fastener Type: Lag Screw
Material: Hot Dip Galvanized Steel
Head Style: Hex
Width Across Flats: (Max 0.750 - Min 0.736)
Width Across Corners: (Max 0.866 - Min 0.840)
Wrench Size: 3/4"
Head Height: 11/32"
Thread Diameter: 1/2"
Thread Pitch: 6 Per Inch
Thread Direction: Right Hand
Thread Type: Coarse
Other: **Hex Lag Screws in 1/2" diameter are Partially Threaded with a Shoulder below the head in lengths 1" and over***

Lag Bolts - Hot Dip Galvanized


Hot Dip Galvanized Steel Hex Head Lag Screws in this selection are made of hot dip galvanized (HDG) steel. The hot dip galvanized finish adds corrosion resistance and durability making these screws suitable for exterior use and applications exposed to the elements.	Hex Head, Lag Threads Lag Screws are essentially heavy duty wood screws. Often referred to as lag bolts because of their larger size, Lag Screws feature sharp cutting threads that provide excellent retention in wood and other soft materials. In longer lengths, lag screws feature a shoulder beneath the head for increased holding power, making them more resistant to pull-out for heavy duty applications. The hex head has replaced the screwdriver style of smaller wood screws due to the size of the fastener.	Common Applications Lag bolts are commonly used in carpentry, used to lag together lumber framing, to lag machinery feet to wood floors, and other heavy carpentry applications. They can also be used with Lag Shield masonry anchors to anchor fixtures to concrete and other masonry materials.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.