ZEKOO 13 FT Bypass Barn Door Hardware Catch Double Door Kit Rustic Black Steel Metal Rail Roller Set Low Ceiling Bracket (13 FT New Style Bypass kit)

【Main Material & Surface】Black frosted, high quality carbon steel, corrosion protection, environmental protection, non-pollution.

【Design】Track and roller arm thickness: 0.23 inches, very sturdy. Screws: 8.8 grade high strengh bearing capacity. Stopper: rubber covered, good buffer effect, reduce the noise.

【Roller Bearing】High purity bearing steel Gcr15, passed the test of opening - closing for 100000 times, wear-resisting, ensure the stability of the move and the wheel's fluency.

【Product】We are professional factory, product has been tested and verified several times, accept custom-made barn door hardware. Our instruction are illustrated in inches, easy to install.

【Service】5 years warranty, 100% money back guarantee, 24 hours online customer service, if any part missed or broken, we will ship out from U.S warehouse ASAP. Any problem in using it, our professional staff in the barn door hardware field will answer questions for you.

size:

13 Feet

Retail Price: $ 229.0

Wholesale Price: Inquire Now

Double track bypass sliding barn door hardware

Our instructions step by step with fractional measurements in inch, have detailed word instructions with pictures


1. Mark and drill track and bracket holes 13 FT Double track bypass have 4X6.6ft long sliding track with joints, Pre-drilled 16" apart holes on track Keeping the tracks level is VERY IMPORTANT 4 X 6.6FT tracks 2 X Track Junction Plate	2. Install the inside track use spacers and bolts Our bolt is 8.8 grade high strengh bearing capacity, fit for concrete wall and wooden wall If your door is thicker than 1-3/4" or have doorway trim, we have 2'' spacer can free for you 20 X 1-3/8'' spacers	3. Attach brackets to the wall and install the outside track The bracket consists of two parts，split design is more stable and load-bearing capacity is higher One track hang one door, the door can slide on track where you want, 2 doors can overlap 10 X brackets	4. Install Door Stoppers with wrench on 2 tracks Stopper can prevent the door falling off from the track, one door have 2 stoppers, ensure the stability and safety Rubber covered, good damping effect, reduce the noise Use 2 screws to fix stopper on track, it is very fastening You can put it on track where you want to stop your door, easy to remove if you want adjust 4 X stoppers


5. Attach steel hangers to your doors Door weight capacity is 200lb, fit for door thickness is 1-3/8" ~ 1-3/4" We have different bolts for your different thickness door if you need, please tell us, we will free for you. 4 X hangers	6. Hang your door and install Anti-jump Pad on top of door Anti-jump Pad can prevent door to be lifted off rail, ensure the stability and safety One door install 2 anti-jump pads on top of door 4 X anti-jump pads	7. Adjusting your door the opening and closing positions then install floor guide Floor guide can prevent the door swinging out or up against the baseboard, let your door slide on same locus Our floor guide have 2 installation methods If you don't want to install on floor or slot in your door, we have different kinds of guides can help your project, please tell us 2 sets X floor guides	8. How to choose size？ Track's length should be at least of total door width or the openning (you can use the track which is a little bit longer). For example, if you have two doors that are each 78'' wide, you will need 2*78'' = 156'' long track. or if your opening is 78'' wide, you will need at least 78'' long track The gap between inner door&wall is about 5/8'' , the gap between two door panels is about 2'' ( based on door thickness: 1-9/16'' ) Ceiling space from top of the door to ceiling only need 8''

About some questions

Q: Can i cut the track?

A: Yes, you can cut it into any length of you want

Q: How about If the studs don't line up with the pre-drilled holes in the rail or there is a doorway trim?

A: You can add a headboard

Q: How width from outside door to wall?

A: It is 6''

Q: Do you accept customization?

A: Yes, We are professional factory, accept mass customization

About our product

High purity bearing steel Gcr15 (Special material for bearing), nsure smooth sliding and stand wear and tear

The material is heavy duty high carbon steel, thickness is 1/4''

We have large processing factory and advanced equipment， excellent professional design, production and workmanship

Only the hardware is for sale, door is not included

Double track bypass barn door hardware can help you save space, easy complements your kitchen, wardrobe, bathroom, bedroom, storeroom

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

ZEKOO 13 FT Bypass Barn Door Hardware Catch Double Door Kit Rustic Black Steel Metal Rail Roller Set Low Ceiling Bracket (13 FT New Style Bypass kit)

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Our instructions step by step with fractional measurements in inch, have detailed word instructions with pictures


1. Mark and drill track and bracket holes 13 FT Double track bypass have 4X6.6ft long sliding track with joints, Pre-drilled 16" apart holes on track Keeping the tracks level is VERY IMPORTANT 4 X 6.6FT tracks 2 X Track Junction Plate	2. Install the inside track use spacers and bolts Our bolt is 8.8 grade high strengh bearing capacity, fit for concrete wall and wooden wall If your door is thicker than 1-3/4" or have doorway trim, we have 2'' spacer can free for you 20 X 1-3/8'' spacers	3. Attach brackets to the wall and install the outside track The bracket consists of two parts，split design is more stable and load-bearing capacity is higher One track hang one door, the door can slide on track where you want, 2 doors can overlap 10 X brackets	4. Install Door Stoppers with wrench on 2 tracks Stopper can prevent the door falling off from the track, one door have 2 stoppers, ensure the stability and safety Rubber covered, good damping effect, reduce the noise Use 2 screws to fix stopper on track, it is very fastening You can put it on track where you want to stop your door, easy to remove if you want adjust 4 X stoppers


5. Attach steel hangers to your doors Door weight capacity is 200lb, fit for door thickness is 1-3/8" ~ 1-3/4" We have different bolts for your different thickness door if you need, please tell us, we will free for you. 4 X hangers	6. Hang your door and install Anti-jump Pad on top of door Anti-jump Pad can prevent door to be lifted off rail, ensure the stability and safety One door install 2 anti-jump pads on top of door 4 X anti-jump pads	7. Adjusting your door the opening and closing positions then install floor guide Floor guide can prevent the door swinging out or up against the baseboard, let your door slide on same locus Our floor guide have 2 installation methods If you don't want to install on floor or slot in your door, we have different kinds of guides can help your project, please tell us 2 sets X floor guides	8. How to choose size？ Track's length should be at least of total door width or the openning (you can use the track which is a little bit longer). For example, if you have two doors that are each 78'' wide, you will need 2*78'' = 156'' long track. or if your opening is 78'' wide, you will need at least 78'' long track The gap between inner door&wall is about 5/8'' , the gap between two door panels is about 2'' ( based on door thickness: 1-9/16'' ) Ceiling space from top of the door to ceiling only need 8''

About some questions

Q: Can i cut the track?

A: Yes, you can cut it into any length of you want

Q: How about If the studs don't line up with the pre-drilled holes in the rail or there is a doorway trim?

A: You can add a headboard

Q: How width from outside door to wall?

A: It is 6''

Q: Do you accept customization?

A: Yes, We are professional factory, accept mass customization

About our product

High purity bearing steel Gcr15 (Special material for bearing), nsure smooth sliding and stand wear and tear

The material is heavy duty high carbon steel, thickness is 1/4''

We have large processing factory and advanced equipment， excellent professional design, production and workmanship

Only the hardware is for sale, door is not included

Double track bypass barn door hardware can help you save space, easy complements your kitchen, wardrobe, bathroom, bedroom, storeroom

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.