CDM GEAR ROC-12 Series Light Mount

MATERIAL - Made from aluminum 1-piece clamp halves that have the rail formed into the clamp

PROFILE - Super low profile at about a 1/2\" away from the barrel with a curved, 3 slot rail that reduces hang ups and snags

EASY TO MOUNT - It only uses 2 bolts that correlate the 2 halves to reduce incorrect mounting

INSTALLATION- It fits within a 1.25\" space on your magazine tube and includes no slip grip pads and a wrench

FITS - Remington 870, 1100, 1187; Benelli (except SuperNova); Mossberg 500, 590; Winchester 1300, 1200 and SXP Defender

Retail Price: $ 39.95

Wholesale Price: Inquire Now

CDM GEAR

The CDM Gear ROC-12 series of light mounts is a US made railed barrel clamp that is used to support factory and aftermarket 1" diameter magazine tubes, and extensions, while providing low profile mounting rails on the left and right side for rail mountable lights and acessories.

The rail and clamp half are manufactured as one piece from aluminum and precision CNC machined to size. All threaded holes are press formed into the mount for hardness. The entire mount is then machine finished to soften round edges before we type III mil spec hard coat anodized for durability.

Fingers at the top of the clamp allow for use with a barrel rib and/or compensation ports, as well as slight barrel taper, while a solid surface on the bottom accepts our 3M no slip grip pads to reduce movement under recoil.

Just 2 socket head cap screws work opposite each other to hold the clamp in place and are included along with a wrench and our 3M no slip grip pads for the magazine tube. The mount requires 1 1/2" of mounting surface without interference from a heat shield. Will not work with heavy walled barrels or magazine tubes larger than 1".


CDM GEAR ROC-12 Light Mount The CDM Gear ROC-12 is our base barrel clamp that is used to support factory and aftermarket 1" diameter magazine tubes, and extensions, while providing mounting rails on the left and right side for rail mountable lights and acessories.	CDM GEAR ROC-12S Light Mount The CDM Gear ROC-12S is the same as above only it includes a limited rotation docking point for a PBQD sling swivel. (sling swivel not included)	CDM GEAR ROC-12R Light Mount The CDM Gear ROC-12R is the same as the ROC-12 only the ROC-12R uses our patented ring and curved rail design, using a flashlight ring mount (included) to draw tight a 1" round bodied tac light into the curved portion of the rail to locate the light. This mount gives you the choice of using either a round bodied tac light or a rail mountable light/laser, or both!

CDM Gear specializes in creating high-quality shotgun light mounts that are created from lightweight, durable 6061-T6 aluminum. This is a combination of aerospace aluminum and advanced structural engineering means that you get a smaller, stronger and lighter mount.

As one of the leaders in the industry, they take pride in creating qualitative products that meet consumer demands.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

CDM GEAR ROC-12 Series Light Mount

BEST SELLERS

Product introduction

Shipping Notices

CDM Gear ROC-12 is a new basic, made in the USA, light mount/barrel.The ROC-12 series is made from new aluminum 1-piece clamp halves that have the rail formed into the clamp.The whole unit weighs 2.4oz.It is super low profile at about a 1/2" away from the barrel with a curved, 3 slot rail that reduces hang ups and snags. It only uses 2 bolts that correlate the 2 halves to reduce incorrect mounting. The fingers at the top of the clamp make it easy to ascertain top from bottom and allow mounting to ribbed and ported barrels. It fits within a 1.25" space on magazine tube and includes no slip grip pads and a wrench.

From the manufacturer

CDM GEAR


CDM GEAR ROC-12 Light Mount The CDM Gear ROC-12 is our base barrel clamp that is used to support factory and aftermarket 1" diameter magazine tubes, and extensions, while providing mounting rails on the left and right side for rail mountable lights and acessories.	CDM GEAR ROC-12S Light Mount The CDM Gear ROC-12S is the same as above only it includes a limited rotation docking point for a PBQD sling swivel. (sling swivel not included)	CDM GEAR ROC-12R Light Mount The CDM Gear ROC-12R is the same as the ROC-12 only the ROC-12R uses our patented ring and curved rail design, using a flashlight ring mount (included) to draw tight a 1" round bodied tac light into the curved portion of the rail to locate the light. This mount gives you the choice of using either a round bodied tac light or a rail mountable light/laser, or both!

As one of the leaders in the industry, they take pride in creating qualitative products that meet consumer demands.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.