WEP 927-II 60 Watt Soldering Iron Station with LED Display - 10 Min Sleep Func, C/F Switch. Includes 5 Extra Solder Tips, Solder Sucker, S/S Tweezers, Roll of Sn60-Pb40 Solder & Brass Sponge w/Flux

The WEP 927-II 60 Watt Soldering Station is a Powerful \"Very Fast Heating\" and will Exceed Your Expectations with its Quality & Durability compared to any Soldering Iron Station in its Class. This Unit takes less than 30 Seconds to heat up from 90°C to 480°C (194°F to 896°F)

The WEP 927-II Soldering Station Includes the Main Power Unit, a 60 Watt Soldering Iron with an Ergonomic Grip with a 45” Cord (from Main Unit to Tip of Soldering Iron), 5 Extra Soldering Tips, a Stainless Steel Spring Soldering Iron Holder, 1 - Solder Sucker, 1 - Pinpoint S/S Tweezers, 1 - Roll of Sn60-Pb40 Rosin Core Solder (GW:50g), a Brass Sponge Soldering Tip Cleaner with Cleaning Flux and a Removable Solder Collector with a Wet Cleaning Sponge.

Specifications: Model Number: XTR-WEP 927- II-ST-RACC, Anti-Statically Designed & ESD Safe, Maximum Power: 60 Watts, Temperature Range: 90°C to 480°C (194°F to 896°F), Temperature Stability: ±2°C (Static), Operating Temperature: 0°C to 40°C (32°F to104°F), Storage Temperature: -20°C to 80°C (-4°F to176°F), Storage Humidity: 35% to 45%, 110/120 Volt, 60 Hz - No 220V Available.

Features: Anti-Static Designed, ESD Safe, 10 Minute Sleep Timer for Safety, Centigrade to Fahrenheit Toggle Switch & PSD (Proportional-Integral-Derivative) Technology often referred to as “Magic Temperature Compensation Technology” which is one of the most sophisticated type of temperature control systems in the world today. This Technology allows for a much quicker temperature correction to maintain constant temperature stability when using the soldering iron at its set temperature.

Retail Price: $ 59.75

Wholesale Price: Inquire Now

WEP 927-II 60 Watt Soldering Iron Station with LED Display

The WEP 927-II 60 Watt Soldering Station is a Powerful "Very Fast Heating" Soldering Station and will Exceed Your Expectations with its Quality & Durability compared to any Soldering Iron Station in its Class.

Maximum Power Output	60 Watts (45 Watts for Soldering Iron/15 Watts for Soldering Iron Mother Board)
Temperature Range	90°C to 480°C (194°F to 896°F)
Temperature Stability	±2°C (Static)
Operating Temperature	0°C to 40°C (32°F to104°F)

Storage Temperature	-20°C to 80°C (-4°F to176°F)
Soldering Iron Cord	40 Inch Very Pliable Cord (Virtually NO Memory)
Type of Power Cord	Power Cord: USA Type B – 3 Pin Grounded Plug – 15 Amp
Rated Voltage	AC 110V/60 Hz - NO 220V Available

The WEP 927-II • Digital LED Display • 60 Watt Soldering Iron Station

The WEP 927-II Complete Kit is Sold by X-Tronic for the Beginners as well as the Experts and Will Exceed your Expectations of Quality and Durability for any Soldering Station in this Category.

Included with this Kit: 60 Watt Soldering Station (45 Watts for Soldering Iron &15 Watts for Mini Mother Board in Soldering Iron), Side Mount Solder Roll Holder, Brass Sponge Tip Cleaner with a Good Supply of Cleaning Flux, Wet Sponge, 5 Extra Soldering Tips, Solder Sucker, Roll of Sn60-Pb40 Rosin Core Solder (0.6mm - GW:50g), Pinpoint Stainless Tweezers & 2 Helping Hands (these are Detachable).

Features: ESD Safe, Anti-Static Designed, 10 Minute Sleep Timer, Centigrade to Fahrenheit Toggle Switch, "Bright" Blue LED Readout on Temperature Display, PID (Proportional-Integral-Derivative) Heating Technology often referred to as Magic Temperature Compensation Technology, 40 Inch Very Pliable Soldering Iron Cord (Virtually NO Memory) and a 55 Inch Power Cord from Wall Plug to Main Unit.

Safety Features	Anti-Statically Designed & ESD Safe
Celsius/Fahrenheit	Change from Celsius to Fahrenheit with with Flip of a Toggle Switch
Sleep Timer	10 Minutes - This is a Safety Feature

Digital LED Display	Bright Blue LED Display for Temperature • Very Visible
PID Technology	Proportional-Integral-Derivative Heating Technology often referred to as "Magic Temperature Compensation"
Soldering Iron Holder	Chromed Spring Steel with "Bakelite" Polymer Insert • No Heat Transfer

The WEP 927-II Soldering Iron Station • Photos & Explanations of What's Included


All Set Up and Ready For Use The WEP 927-II has a Temperature Range of 90°C to 480°C (194°F to 896°F). You can Change the Readout from Celsius to Fahrenheit with a "Flip of the Switch". The above photo also shows the 2 Helping Hands holding a PCB to work on.	60 Watt Soldering Iron with Ergonomic Heat Resistant Silicone Grip The Soldering Iron that comes with this Unit boasts a Stainless Steel Shank with an "Ergonomic Heat Resistant Silicone Grip" that is Very Comfortable to use. The Soldering Iron Features a "Quick Temp" Heating Element that will heat up to the Top Temperature in less than 30 Seconds.	5 Extra Assorted Sizes/Styles of Soldering Tips This Unit comes with 1 - TI Soldering Tip already mounted in the Soldering Iron and 5 Extra Sizes/Styles as shown above. The 5 Extras are the Following Sizes/Styles: 1 Each - T-I 1 Each -T-B 1 Each -T-3C 1 Each -T-2.4D 1 Each - T-K	2 - Helping Hands (Detachable) The 2 Helping Hands that come with this unit are 10" Long. They can be Easily be Attached or Detached from the Main Unit by Screwing or Unscrewing them from the Main Unit. You will find them Very Helpful on Small PCB's that you can Prop Up to work on right in front of you.


Soldering Iron Tip Cleaner - Soft Coiled Brass Wire Sponge Holder with a Supply of Rosin Flux for Cleaning Soft coiled brass wire thoroughly cleans the residue on the tip, extending the service life of the tip. Reduces the rate of oxide accumulation in the tips, Prevents the risk of contamination and Avoids premature wear of soldering iron tips.	Roll of X-Tronic Sn60-Pb40 Rosin Core Solder A Roll of X-Tronic 0.6mm - Sn60-Pb40 Rosin Core Solder (GW:50g) is also Included. For those of you who wonder how many linear feet of solder is on this 50g roll, the answer is right at 85 feet of solder.	Solder Sucker Desoldering Vacuum Pump Solder Removal Tool A Nice Quality Solder Sucker also comes with this Complete Kit. It has good bit of suction andyou can just hang onto it and use your thumb to reset and suck up the molten solder. Simple design allows easy one-handed use and a lightweight and compact design.	Precision Pinpoint Anti-Static ESD Safe Stainless Steel Tweezers These Pinpoint Tweezers are made of Durable Stainless Steel with Anti-Static, Non-Magnetic Paint used on the Surface and is Resistant to most Acids and other Corrosive Substances.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

WEP 927-II 60 Watt Soldering Iron Station with LED Display - 10 Min Sleep Func, C/F Switch. Includes 5 Extra Solder Tips, Solder Sucker, S/S Tweezers, Roll of Sn60-Pb40 Solder & Brass Sponge w/Flux

BEST SELLERS

Product introduction

Shipping Notices

WEP 927-I Adjustable Temp 60 Watt Soldering Iron Station with Ergonomic Grip Soldering Iron & Stainless Spring Holder, Brass Tip Cleaner w/Cleaning Flux & Solder Collector w/Sponge The WEP 927-I 60 Watt Soldering Station is a Powerful "Very Fast Heating" and will Exceed Your Expectations with its Quality & Durability compared to any Soldering Iron Station in its Class. This Unit takes less than 30 Seconds to heat Included with the WEP 927-I: Main Power Unit 60 Watt Soldering Iron with Ergonomic Grip & 45" Cord (From Main Unit to Tip of Soldering Iron) Stainless Steel (Removeable for Transporting) Spring Soldering Iron Holder Side Solder Roll Holder Brass Sponge Soldering Tip Cleaner with Cleaning Flux Removable Solder Collector with Wet Cleaning Sponge Specifications: Model Number: XTR-WEP-927-I Maximum Power: 60 Watts Temperature Range: 200°C to 480°C (392°F to 896°F) Temperature Stability: ±2°C (Static) Operating Temperature: 0°C to 40°C (32°F to104°F) Storage Temperature: -20°C to 80°C (-4°F to176°F) Storage Humidity: 35% to 45% Length of Power Cord: 56.00” Type of Power Cord: USA Type B – 3 Pin Grounded Plug – 15 A 110/120 Volt, 60 Hz (No 220V Available) Anti-Statically Designed & ESD Safe X-Tronic International, Inc. is the Exclusive Authorized Seller/Distributor of WEP Brand 927 Series Soldering Stations in the USA All WEP Brand Products offered by X-Tronic International, Inc. come with a 30-Day Unconditional Money Back Guaranty which also includes a 3-Year Warranty with the Cost of Parts and Labor Included.

Product Description

WEP 927-II 60 Watt Soldering Iron Station with LED Display

Maximum Power Output	60 Watts (45 Watts for Soldering Iron/15 Watts for Soldering Iron Mother Board)
Temperature Range	90°C to 480°C (194°F to 896°F)
Temperature Stability	±2°C (Static)
Operating Temperature	0°C to 40°C (32°F to104°F)

Storage Temperature	-20°C to 80°C (-4°F to176°F)
Soldering Iron Cord	40 Inch Very Pliable Cord (Virtually NO Memory)
Type of Power Cord	Power Cord: USA Type B – 3 Pin Grounded Plug – 15 Amp
Rated Voltage	AC 110V/60 Hz - NO 220V Available

The WEP 927-II • Digital LED Display • 60 Watt Soldering Iron Station

The WEP 927-II Complete Kit is Sold by X-Tronic for the Beginners as well as the Experts and Will Exceed your Expectations of Quality and Durability for any Soldering Station in this Category.

Safety Features	Anti-Statically Designed & ESD Safe
Celsius/Fahrenheit	Change from Celsius to Fahrenheit with with Flip of a Toggle Switch
Sleep Timer	10 Minutes - This is a Safety Feature

Digital LED Display	Bright Blue LED Display for Temperature • Very Visible
PID Technology	Proportional-Integral-Derivative Heating Technology often referred to as "Magic Temperature Compensation"
Soldering Iron Holder	Chromed Spring Steel with "Bakelite" Polymer Insert • No Heat Transfer

The WEP 927-II Soldering Iron Station • Photos & Explanations of What's Included


All Set Up and Ready For Use The WEP 927-II has a Temperature Range of 90°C to 480°C (194°F to 896°F). You can Change the Readout from Celsius to Fahrenheit with a "Flip of the Switch". The above photo also shows the 2 Helping Hands holding a PCB to work on.	60 Watt Soldering Iron with Ergonomic Heat Resistant Silicone Grip The Soldering Iron that comes with this Unit boasts a Stainless Steel Shank with an "Ergonomic Heat Resistant Silicone Grip" that is Very Comfortable to use. The Soldering Iron Features a "Quick Temp" Heating Element that will heat up to the Top Temperature in less than 30 Seconds.	5 Extra Assorted Sizes/Styles of Soldering Tips This Unit comes with 1 - TI Soldering Tip already mounted in the Soldering Iron and 5 Extra Sizes/Styles as shown above. The 5 Extras are the Following Sizes/Styles: 1 Each - T-I 1 Each -T-B 1 Each -T-3C 1 Each -T-2.4D 1 Each - T-K	2 - Helping Hands (Detachable) The 2 Helping Hands that come with this unit are 10" Long. They can be Easily be Attached or Detached from the Main Unit by Screwing or Unscrewing them from the Main Unit. You will find them Very Helpful on Small PCB's that you can Prop Up to work on right in front of you.


Soldering Iron Tip Cleaner - Soft Coiled Brass Wire Sponge Holder with a Supply of Rosin Flux for Cleaning Soft coiled brass wire thoroughly cleans the residue on the tip, extending the service life of the tip. Reduces the rate of oxide accumulation in the tips, Prevents the risk of contamination and Avoids premature wear of soldering iron tips.	Roll of X-Tronic Sn60-Pb40 Rosin Core Solder A Roll of X-Tronic 0.6mm - Sn60-Pb40 Rosin Core Solder (GW:50g) is also Included. For those of you who wonder how many linear feet of solder is on this 50g roll, the answer is right at 85 feet of solder.	Solder Sucker Desoldering Vacuum Pump Solder Removal Tool A Nice Quality Solder Sucker also comes with this Complete Kit. It has good bit of suction andyou can just hang onto it and use your thumb to reset and suck up the molten solder. Simple design allows easy one-handed use and a lightweight and compact design.	Precision Pinpoint Anti-Static ESD Safe Stainless Steel Tweezers These Pinpoint Tweezers are made of Durable Stainless Steel with Anti-Static, Non-Magnetic Paint used on the Surface and is Resistant to most Acids and other Corrosive Substances.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.