SWAG Off Road 20 TON Finger Brake Heavy Duty"Fully Welded"

[]

Retail Price: $ 517.95

SWAG Offroad 20 TON Finger Brake Heavy Duty "Fully Welded"

Our Heavy Duty 20 TON Finger Brake Kit comes Fully Welded and ready to go out of the box. Designed to fit the Harbor Freight 20 ton hydraulic press Item # 32879, 60603, or any Press with at least 22.125" between the vertical uprights. Press brake kit includes an adjustable back stop for accurate and repeatable bends.

The top clamping bar is machined out of 4140 material and includes 5 segmented removable sections. 1", 2", 3", 4" and 9.5" long pieces. These segmented blocks can be removed and rearranged to allow bending of restricted areas on a piece of sheet metal or on an already partially formed pieces.

The heavy duty press brake kit has the same quality construction and number of components as the standard press brake kit, however the differences are as follows. The bottom formed channel on the HD press brake kit is cut out of high strength 3/8" thick steel and the bottom "V" die of has a total width of 4" wide x 1/4" thick to allow for easier bending of thicker material.

Max Bending Radius (deg.) 110
Max. Bending Capacity 5/8" plate
Max Bending Width 19.25"
Total width of the brake is 22.125" wide

Tools required for assembly, welder, grinder, level, small square.

It Is capable of bending mild steel in the following length and thickness.

19" = Full bending width of the bottom die on anything 3/16" or thinner.
15" in 1/4"
13" in 5/16"
11" in 3/8"
6" in 1/2"
3" in 5/8"

Please provide us with a valid shipping address USPS delivers too.

SWAG Off Road 20 TON Finger Brake Heavy Duty"Fully Welded"1

SWAG Off Road 20 TON Finger Brake Heavy Duty"Fully Welded"2

SWAG Off Road 20 TON Finger Brake Heavy Duty"Fully Welded"3

Here at SWAG our Press Brakes are built for individuals looking for quality, 100% American made tools. Designed for those working with a limited budget and the need for custom metal fabrication.

Product evolution and expansion has led us to Several different sizes and models of Brakes designed to meet a wide variety of needs. From our smallest, with a bending width of 13.50", to our Mammoth 50" Universal Finger Press Brake DIY Builder Kit with a total bending width of 49"! We strive to keep the needs of the everyday working man or Saturday shop hound at the forefront of our minds.

SWAG Off Road

Innovative
Unique
Authentic
Efficient
Integral
Honorable

We believe in our Motto "Doing Ordinary Extraordinary!"

Since our inception, we have a long history of service. We believe in doing business the old fashioned way; we actually answer our Phone!

Visit our website for more information!

_ Available Finger Brake Accessories:


Finger Brake Gooseneck Dies Increase the bending capabilities of your SWAG Finger Press Brake kit! The SWAG Gooseneck dies are laser cut at 90° to allow for air bending. These punches are used for forming right angle bends, channels, or other special bends where our straight 90° punch would cause interference and limit your bending options.If you have used your press brake for any "special" projects you have ran into the limitations of the straight segmented fingers. These limitations become apparent when bending shallow pans or forming complex "U" bends. Check out our "Goosneck Dies"	Finger Brake Hemming Dies Increase the bending capabilities of your SWAG Finger Press Brake kit! SWAG Hemming dies perform an operation in which the edges of the sheet metal are folded (or folded over) another part in order to achieve a tighter fit. This product includes precise laser cut pieces of 1/2" plate that can be stacked in a line or welded together to suite your application. The kit consists of 32 individual pieces that when fully assemble forms an 8" long Hemming die. Typical Hemming operations are used to connect parts together, to improve the appearance of the part and to reinforce edges.	"FLAT TOP" Adjustable Bottom V Die This simple concept allows you to easily adjust the gap between the bottom V die, by loosening two 5/16" bolts and siding the 3/8" thick laser cut plates in or out. This will allow for tighter bends on thinner materials and or allow you to bend much shorter pieces of material than what is currently offered with the SWAG standard or heavy duty press brake kits. The bottom steel plate has 4 threaded 5/16" holes and is laser cut out of 5/8" thick steel which sits upon the bottom die of the SWAG 20 ton press brake kits. The "Flat Top" is a self contained unit and can be removed or slid into position with in a few seconds.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

SWAG Off Road 20 TON Finger Brake Heavy Duty"Fully Welded"

BEST SELLERS

Product introduction

Shipping Notices

Product Description

SWAG Offroad 20 TON Finger Brake Heavy Duty "Fully Welded"

Max Bending Radius (deg.) 110
Max. Bending Capacity 5/8" plate
Max Bending Width 19.25"
Total width of the brake is 22.125" wide

Tools required for assembly, welder, grinder, level, small square.

It Is capable of bending mild steel in the following length and thickness.

19" = Full bending width of the bottom die on anything 3/16" or thinner.
15" in 1/4"
13" in 5/16"
11" in 3/8"
6" in 1/2"
3" in 5/8"

Please provide us with a valid shipping address USPS delivers too.

Here at SWAG our Press Brakes are built for individuals looking for quality, 100% American made tools. Designed for those working with a limited budget and the need for custom metal fabrication.

SWAG Off Road

Innovative
Unique
Authentic
Efficient
Integral
Honorable

We believe in our Motto "Doing Ordinary Extraordinary!"

Since our inception, we have a long history of service. We believe in doing business the old fashioned way; we actually answer our Phone!

Visit our website for more information!

_ Available Finger Brake Accessories:


Finger Brake Gooseneck Dies Increase the bending capabilities of your SWAG Finger Press Brake kit! The SWAG Gooseneck dies are laser cut at 90° to allow for air bending. These punches are used for forming right angle bends, channels, or other special bends where our straight 90° punch would cause interference and limit your bending options.If you have used your press brake for any "special" projects you have ran into the limitations of the straight segmented fingers. These limitations become apparent when bending shallow pans or forming complex "U" bends. Check out our "Goosneck Dies"	Finger Brake Hemming Dies Increase the bending capabilities of your SWAG Finger Press Brake kit! SWAG Hemming dies perform an operation in which the edges of the sheet metal are folded (or folded over) another part in order to achieve a tighter fit. This product includes precise laser cut pieces of 1/2" plate that can be stacked in a line or welded together to suite your application. The kit consists of 32 individual pieces that when fully assemble forms an 8" long Hemming die. Typical Hemming operations are used to connect parts together, to improve the appearance of the part and to reinforce edges.	"FLAT TOP" Adjustable Bottom V Die This simple concept allows you to easily adjust the gap between the bottom V die, by loosening two 5/16" bolts and siding the 3/8" thick laser cut plates in or out. This will allow for tighter bends on thinner materials and or allow you to bend much shorter pieces of material than what is currently offered with the SWAG standard or heavy duty press brake kits. The bottom steel plate has 4 threaded 5/16" holes and is laser cut out of 5/8" thick steel which sits upon the bottom die of the SWAG 20 ton press brake kits. The "Flat Top" is a self contained unit and can be removed or slid into position with in a few seconds.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.