- vinyl
- Made in USA
- FITS ANY SHOTGUN – Designed to fit any hunting or sporting shotgun. The kit includes pieces for the receiver, forend, traditional buttstock, and barrel up to 29\" in length.
- EASY TO INSTALL VINYL WRAP – Do it yourself installation means you have creative control. Choose how much or how little to wrap with the help of our one-of-a-kind precut templates and installation videos. Use a heat gun to conform the vinyl to the surface and a hobby knife to trim to fit. Install in just a few hours. No cure time, ready for immediate use!
- WATERPROOF NON-REFLECTIVE MATTE FINISH – GunSkins are made from high-performance, premium vinyl. This automotive grade vinyl is 100% waterproof and non-porous. This is perfect for hunting waterfowl when you are knee deep among the reeds. No rain, no rust, no worries!
- REMOVEABLE AND LEAVES BEHIND NO RESIDUE – This non-permanent finish will not alter the resell value of your gun. If you need to take it off, simply add heat and remove. The surface will be just as it was prior to installation. Switch patterns for different hunting seasons with ease!
- LIFETIME WARRANTY – This GunSkins product has a Lifetime Warranty which covers normal use by the initial user of this product. This GunSkins product will be free of fading for the duration of the warranty period as long as initial user has the product correctly installed on a firearm, firearm accessory or other GunSkins approved application.
Shotgun Skins are Do It Yourself Vinyl Wraps for Any Hunting or Sporting Shotgun
GunSkins Shotgun Skins are designed to fit any hunting or sporting shotguns. The kit includes pieces for the receiver, forend, buttstock, and barrel. For barrels over 29", irregular shaped stocks, magazine tubes, or double barreled shotguns please consider our Gear Skin or Scope Skin for additional material.
Shotgun Skin Kit Template with Precut Pieces
GunSkins Shotgun Skins will fit most hunting and sporting shotguns. The DIY vinyl wrap kit is not designed for tactical shotguns, which may contain pistol grips, picatinny rails, etc. Please consider using a Gear Skin for these types of shotguns. The GunSkins Shotgun Skin kit comes with the following precut pieces:
- One 3" x 29” barrel piece
- One 7" x 18" forend piece
- Two 3.5” x 11" receiver pieces
- Two pieces for the buttstock
Step by Step Installation Instructions
Clean the Gun.
Use a gun-specific degreaser and a small brush to work away all dirt, oil, lubrication, and residue. Use rubbing alcohol to remove moisture. A clean gun makes for a clean install.
Peel and Stick.
Peel the material off the template, one piece at a time. Place it centered on the surface and work it in using your fingers. Reposition until you are satisfied with the placement.
Heat and Trim.
Use a heat gun or blow dryer to get the vinyl to conform to the shape of the gun. Use a sharp hobby knife to trim away excess material. Heat again to finish.
Frequently Asked Questions
Why won't the vinyl stick to the surface of my gun?
You must thoroughly clean the gun/accessory before installing the wrap. Use a gun-specific degreaser and a small brush. Make sure to scrub all the recessed areas to remove oil and dirt. Wipe clean using a lint-free cloth or rinse with warm water and let air dry.
Can the wrap be removed?
GunSkins are removable and have no effect on the finish. To remove, heat the material with a heat gun/blow dryer and peel off piece by piece.
Is it waterproof?
The high-performance vinyl is non-porous, which means that the material creates an air-tight seal that also prevents water from getting in or out. As a matter of fact, GunSkins are completely waterproof.
Will heat from the barrel melt the vinyl?
The heat from the barrel will not affect the material. However, we do not recommend wrapping the barrel if you fire using full auto or use a suppressor.
BEST SELLERS
Whether you are dumping ducks in a marsh or defending your home, the GunSkins Shotgun Skin will fit your needs. Designed to fit any single barrel shotgun with a barrel up to 29", this easy-to-install gun wrap allows you to add a non-permanent camo finish in just under a few hours.
GunSkins are 100% waterproof, non-reflective, and made in the USA. Conceal, protect, and customize your boom stick with pride!
Product Description
Shotgun Skins are Do It Yourself Vinyl Wraps for Any Hunting or Sporting Shotgun
GunSkins Shotgun Skins are designed to fit any hunting or sporting shotguns. The kit includes pieces for the receiver, forend, buttstock, and barrel. For barrels over 29", irregular shaped stocks, magazine tubes, or double barreled shotguns please consider our Gear Skin or Scope Skin for additional material.
Shotgun Skin Kit Template with Precut Pieces
GunSkins Shotgun Skins will fit most hunting and sporting shotguns. The DIY vinyl wrap kit is not designed for tactical shotguns, which may contain pistol grips, picatinny rails, etc. Please consider using a Gear Skin for these types of shotguns. The GunSkins Shotgun Skin kit comes with the following precut pieces:
- One 3" x 29” barrel piece
- One 7" x 18" forend piece
- Two 3.5” x 11" receiver pieces
- Two pieces for the buttstock
Step by Step Installation Instructions
Clean the Gun.
Use a gun-specific degreaser and a small brush to work away all dirt, oil, lubrication, and residue. Use rubbing alcohol to remove moisture. A clean gun makes for a clean install.
Peel and Stick.
Peel the material off the template, one piece at a time. Place it centered on the surface and work it in using your fingers. Reposition until you are satisfied with the placement.
Heat and Trim.
Use a heat gun or blow dryer to get the vinyl to conform to the shape of the gun. Use a sharp hobby knife to trim away excess material. Heat again to finish.
Frequently Asked Questions
Why won't the vinyl stick to the surface of my gun?
You must thoroughly clean the gun/accessory before installing the wrap. Use a gun-specific degreaser and a small brush. Make sure to scrub all the recessed areas to remove oil and dirt. Wipe clean using a lint-free cloth or rinse with warm water and let air dry.
Can the wrap be removed?
GunSkins are removable and have no effect on the finish. To remove, heat the material with a heat gun/blow dryer and peel off piece by piece.
Is it waterproof?
The high-performance vinyl is non-porous, which means that the material creates an air-tight seal that also prevents water from getting in or out. As a matter of fact, GunSkins are completely waterproof.
Will heat from the barrel melt the vinyl?
The heat from the barrel will not affect the material. However, we do not recommend wrapping the barrel if you fire using full auto or use a suppressor.
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
