- []
Next Generation Bottle-Top Vacuum Filtration
Manufactured in North America to the highest-quality standards, Autofil Bottle Top Filters offer great value with super high flow rate and maximum throughput with limited foaming.
Developed with You in Mind
Foxx Life Sciences, located just north of Boston, has spent over 10 years developing and manufacturing one of the widest range of filter sizes, membrane pore sizes, and materials for bottle-top vacuum filtration market. Autofil can be used with a standard vacuum adapter included with each unit or placed on the patented pedestal or cradle ring (sold separately) for ease of use and safety. Bottle includes patented SECUREgrasp caps and clear graduation marks.
Autofil is sterilized to a Sterility Assurance Level of 10^-6 in the USA and is produced with all Class VI materials. Design, development and tooling were all completed in the USA. Autofil is also manufactured with a one piece funnel design lowering cost and reducing quality issues. Finally, every unit is produced in a ISO 9001 and ISO 13485 certified cleanroom in North America.
High Flow Rates
Foxx Life Sciences provides a wide range of membranes and pore sizes with high flow rates and increased throughput that maximize the amount of media that can be filtered before clogging. Our patented single piece funnel design greatly reduces manufacturing errors while increasing vacuum performance.
Most loved SAL in the Industry
Because your solution is important, we use a medical grade SAL of 10^-6, which reduces the probability of obtaining a non-sterile unit by two orders of magnitude.
Low Center of Gravity
Our bottle-top filters are wider, meaning that they are easier to fit under the hood and have a lower center of gravity. Thus, the instability created when media is poured into the top of the assembly is greatly reduced.
Patented SECUREgrasp Cap
Our patented SECUREgrasp Cap allows lab technicians to hold their media bottle by using the cap - even when your gloves are wet! Exaggerated ridging around the edge of the cap make it easier to securely tighten the cap to the media bottle. A matte surface on the top of the cap makes it easy to label your filtrate sample!
|
|
|
|
|---|---|---|---|
| Autofil | Autofil SS | Autofil PP | |
| Sterilized | Gamma 10^-6 in the USA | Gamma 10^-6 in the USA | Assembled in Class 7 Cleanroom |
| Funnel Material | Polystyrene (PS) | Polystyrene (PS) | Polypropylene (PP) |
| Material Grade | Class VI / FDA | Class VI / FDA | FDA |
| Sizes | 15mL, 50mL, 250mL, 500mL, 1000mL | 250mL, 500mL, 1000mL | 500mL, 1000mL |
| Available Funnel-Only | Yes | Yes | Yes - Available only as Funnel-Only |
| Membrane Types | Asymmetric PES | High-Flow Asymmetric PES | Nylon, PTFE, High-Flow Asymmetric PES |
| Pore Sizes | 0.1µm, 0.2µm, 0.45µm | 0.2µm | 0.2µm, 0.45µm |
| Best Used for | General filtration of cell cultures and media for preparation or sterilization | Thick, viscous or time-sensitive media. Great for FBS | Various solvents that are chemical incompatible with Polystyrene (PS) |
| Can Be Used with Cradle Ring or Pedestal | Yes | Yes | Yes |
BEST SELLERS
From the manufacturer
Next Generation Bottle-Top Vacuum Filtration
Manufactured in North America to the highest-quality standards, Autofil Bottle Top Filters offer great value with super high flow rate and maximum throughput with limited foaming.
Developed with You in Mind
Foxx Life Sciences, located just north of Boston, has spent over 10 years developing and manufacturing one of the widest range of filter sizes, membrane pore sizes, and materials for bottle-top vacuum filtration market. Autofil can be used with a standard vacuum adapter included with each unit or placed on the patented pedestal or cradle ring (sold separately) for ease of use and safety. Bottle includes patented SECUREgrasp caps and clear graduation marks.
Autofil is sterilized to a Sterility Assurance Level of 10^-6 in the USA and is produced with all Class VI materials. Design, development and tooling were all completed in the USA. Autofil is also manufactured with a one piece funnel design lowering cost and reducing quality issues. Finally, every unit is produced in a ISO 9001 and ISO 13485 certified cleanroom in North America.
High Flow Rates
Foxx Life Sciences provides a wide range of membranes and pore sizes with high flow rates and increased throughput that maximize the amount of media that can be filtered before clogging. Our patented single piece funnel design greatly reduces manufacturing errors while increasing vacuum performance.
Most loved SAL in the Industry
Because your solution is important, we use a medical grade SAL of 10^-6, which reduces the probability of obtaining a non-sterile unit by two orders of magnitude.
Low Center of Gravity
Our bottle-top filters are wider, meaning that they are easier to fit under the hood and have a lower center of gravity. Thus, the instability created when media is poured into the top of the assembly is greatly reduced.
Patented SECUREgrasp Cap
Our patented SECUREgrasp Cap allows lab technicians to hold their media bottle by using the cap - even when your gloves are wet! Exaggerated ridging around the edge of the cap make it easier to securely tighten the cap to the media bottle. A matte surface on the top of the cap makes it easy to label your filtrate sample!
|
|
|
|
|
|---|---|---|---|
| Autofil | Autofil SS | Autofil PP | |
| Sterilized | Gamma 10^-6 in the USA | Gamma 10^-6 in the USA | Assembled in Class 7 Cleanroom |
| Funnel Material | Polystyrene (PS) | Polystyrene (PS) | Polypropylene (PP) |
| Material Grade | Class VI / FDA | Class VI / FDA | FDA |
| Sizes | 15mL, 50mL, 250mL, 500mL, 1000mL | 250mL, 500mL, 1000mL | 500mL, 1000mL |
| Available Funnel-Only | Yes | Yes | Yes - Available only as Funnel-Only |
| Membrane Types | Asymmetric PES | High-Flow Asymmetric PES | Nylon, PTFE, High-Flow Asymmetric PES |
| Pore Sizes | 0.1µm, 0.2µm, 0.45µm | 0.2µm | 0.2µm, 0.45µm |
| Best Used for | General filtration of cell cultures and media for preparation or sterilization | Thick, viscous or time-sensitive media. Great for FBS | Various solvents that are chemical incompatible with Polystyrene (PS) |
| Can Be Used with Cradle Ring or Pedestal | Yes | Yes | Yes |
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
